Export limit exceeded: 339475 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (339475 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53054 | 1 Linux | 1 Linux Kernel | 2025-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine). | ||||
| CVE-2019-16256 | 1 Trustedconnectivityalliance | 1 S\@t Browser | 2025-11-12 | 9.8 Critical |
| Some Samsung devices include the SIMalliance Toolbox Browser (aka S@T Browser) on the UICC, which might allow remote attackers to retrieve location and IMEI information, or retrieve other data or execute certain commands, via SIM Toolkit (STK) instructions in an SMS message, aka Simjacker. | ||||
| CVE-2023-53055 | 1 Linux | 1 Linux Kernel | 2025-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: destroy keyring after security_sb_delete() fscrypt_destroy_keyring() must be called after all potentially-encrypted inodes were evicted; otherwise it cannot safely destroy the keyring. Since inodes that are in-use by the Landlock LSM don't get evicted until security_sb_delete(), this means that fscrypt_destroy_keyring() must be called *after* security_sb_delete(). This fixes a WARN_ON followed by a NULL dereference, only possible if Landlock was being used on encrypted files. | ||||
| CVE-2025-37143 | 2 Arubanetworks, Hpe | 2 Arubaos, Arubaos | 2025-11-12 | 4.9 Medium |
| An arbitrary file download vulnerability exists in the web-based management interface of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an Authenticated malicious actor to download arbitrary files through carefully constructed exploits. | ||||
| CVE-2025-52602 | 1 Hcltech | 1 Bigfix Query | 2025-11-12 | 4.2 Medium |
| HCL BigFix Query is affected by a sensitive information disclosure in the WebUI Query application. An HTTP GET endpoint request returns discoverable responses that may disclose: group names, active user names (or IDs). An attacker can use that information to target individuals with phishing or other social-engineering attacks. | ||||
| CVE-2025-37144 | 2 Arubanetworks, Hpe | 2 Arubaos, Arubaos | 2025-11-12 | 4.9 Medium |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | ||||
| CVE-2025-37145 | 2 Arubanetworks, Hpe | 2 Arubaos, Arubaos | 2025-11-12 | 4.9 Medium |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. | ||||
| CVE-2025-61417 | 1 Tastyigniter | 1 Tastyigniter | 2025-11-12 | 8.8 High |
| Cross-Site Scripting (XSS) vulnerability exists in TastyIgniter 3.7.7, affecting the /admin/media_manager component. Attackers can upload a malicious SVG file containing JavaScript code. When an administrator previews the file, the code executes in their browser context, allowing the attacker to perform unauthorized actions such as modifying the admin account credentials. | ||||
| CVE-2025-54806 | 2 Growi, Weseek | 2 Growi, Growi | 2025-11-12 | 6.1 Medium |
| GROWI v4.2.7 and earlier contains a cross-site scripting vulnerability in the page alert function. If a user accesses a crafted URL while logged in to the affected product, an arbitrary script may be executed on the user's web browser. | ||||
| CVE-2025-61956 | 1 Radiometrics | 1 Vizair | 2025-11-12 | 10 Critical |
| Radiometrics VizAir is vulnerable to a lack of authentication mechanisms for critical functions, such as admin access and API requests. Attackers can modify configurations without authentication, potentially manipulating active runway settings and misleading air traffic control (ATC) and pilots. Additionally, manipulated meteorological data could mislead forecasters and ATC, causing inaccurate flight planning. | ||||
| CVE-2025-54496 | 1 Fujielectric | 1 Monitouch V-sft | 2025-11-12 | 7.8 High |
| A maliciously crafted project file may cause a heap-based buffer overflow in Fuji Electric Monitouch V-SFT-6, which may allow the attacker to execute arbitrary code. | ||||
| CVE-2025-54526 | 1 Fujielectric | 1 Monitouch V-sft | 2025-11-12 | 7.8 High |
| Fuji Electric Monitouch V-SFT-6 is vulnerable to a stack-based buffer overflow while processing a specially crafted project file, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2025-27919 | 1 Anydesk | 1 Anydesk | 2025-11-12 | 8.2 High |
| An issue was discovered in AnyDesk through 9.0.4. A remotely connected user with the "Control my device" permission can manipulate remote AnyDesk settings and create a password for the Full Access profile without needing confirmation from the counterparty. Consequently, the attacker can later connect without this counterparty confirmation. | ||||
| CVE-2025-12867 | 1 Hundredplus | 1 Eip Plus | 2025-11-12 | 7.2 High |
| EIP Plus developed by Hundred Plus has an Arbitrary File Uplaod vulnerability, allowing privileged remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. | ||||
| CVE-2025-12866 | 1 Hundredplus | 1 Eip Plus | 2025-11-12 | 9.8 Critical |
| EIP Plus developed by Hundred Plus has a Weak Password Recovery Mechanism vulnerability, allowing unauthenticated remote attacker to predict or brute-force the 'forgot password' link, thereby successfully resetting any user's password. | ||||
| CVE-2025-11948 | 1 Excellent Infotek | 1 Document Management System | 2025-11-12 | 9.8 Critical |
| Document Management System developed by Excellent Infotek has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. | ||||
| CVE-2025-5680 | 1 Tongzhouyun | 1 Agilebpm | 2025-11-12 | 6.3 Medium |
| A vulnerability classified as critical was found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 2.5.0. Affected by this vulnerability is the function executeScript of the file /src/main/java/com/dstz/sys/rest/controller/SysScriptController.java of the component Groovy Script Handler. The manipulation of the argument script leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-5679 | 1 Tongzhouyun | 1 Agilebpm | 2025-11-12 | 6.3 Medium |
| A vulnerability classified as critical has been found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 2.5.0. Affected is the function parseStrByFreeMarker of the file /src/main/java/com/dstz/sys/rest/controller/SysToolsController.java. The manipulation of the argument str leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2023-53047 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix race condition in amdtee_open_session There is a potential race condition in amdtee_open_session that may lead to use-after-free. For instance, in amdtee_open_session() after sess->sess_mask is set, and before setting: sess->session_info[i] = session_info; if amdtee_close_session() closes this same session, then 'sess' data structure will be released, causing kernel panic when 'sess' is accessed within amdtee_open_session(). The solution is to set the bit sess->sess_mask as the last step in amdtee_open_session(). | ||||
| CVE-2023-53046 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix race condition in hci_cmd_sync_clear There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30 | ||||