| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
Each time the platform goes to low power, PM suspend / resume routines
call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset().
This adds a new devres each time.
This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be
called from udc_start().
This can be seen with tracing:
- echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable
- go to low power
- cat /sys/kernel/debug/tracing/trace
A new "ADD" entry is found upon each low power cycle:
... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes)
... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes)
...
A second issue is addressed here:
- regulator_bulk_enable() is called upon each PM cycle (suspend/resume).
- regulator_bulk_disable() never gets called.
So the reference count for these regulators constantly increase, by one
upon each low power cycle, due to missing regulator_bulk_disable() call
in __dwc2_lowlevel_hw_disable().
The original fix that introduced the devm_add_action_or_reset() call,
fixed an issue during probe, that happens due to other errors in
dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without
disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL.
Rather fix the error path: disable all the low level hardware in the
error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode
has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable().
"ll_hw_enabled" should achieve the same (and is used currently in the
remove() routine). |
| Some Samsung devices include the SIMalliance Toolbox Browser (aka S@T Browser) on the UICC, which might allow remote attackers to retrieve location and IMEI information, or retrieve other data or execute certain commands, via SIM Toolkit (STK) instructions in an SMS message, aka Simjacker. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: destroy keyring after security_sb_delete()
fscrypt_destroy_keyring() must be called after all potentially-encrypted
inodes were evicted; otherwise it cannot safely destroy the keyring.
Since inodes that are in-use by the Landlock LSM don't get evicted until
security_sb_delete(), this means that fscrypt_destroy_keyring() must be
called *after* security_sb_delete().
This fixes a WARN_ON followed by a NULL dereference, only possible if
Landlock was being used on encrypted files. |
| An arbitrary file download vulnerability exists in the web-based management interface of AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an Authenticated malicious actor to download arbitrary files through carefully constructed exploits. |
| HCL BigFix Query is affected by a sensitive information disclosure in the WebUI Query application. An HTTP GET endpoint request returns discoverable responses that may disclose: group names, active user names (or IDs). An attacker can use that information to target individuals with phishing or other social-engineering attacks. |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. |
| Arbitrary file download vulnerabilities exist in a low-level interface library in AOS-10 GW and AOS-8 Controller/Mobility Conductor operating systems. Successful exploitation could allow an authenticated malicious actor to download arbitrary files through carefully constructed exploits. |
| Cross-Site Scripting (XSS) vulnerability exists in TastyIgniter 3.7.7, affecting the /admin/media_manager component. Attackers can upload a malicious SVG file containing JavaScript code. When an administrator previews the file, the code executes in their browser context, allowing the attacker to perform unauthorized actions such as modifying the admin account credentials. |
| GROWI v4.2.7 and earlier contains a cross-site scripting vulnerability in the page alert function. If a user accesses a crafted URL while logged in to the affected product, an arbitrary script may be executed on the user's web browser. |
| Radiometrics VizAir is vulnerable to a lack of authentication mechanisms for critical functions, such as admin access and API requests. Attackers can modify configurations without authentication, potentially manipulating active runway settings and misleading air traffic control (ATC) and pilots. Additionally, manipulated meteorological data could mislead forecasters and ATC, causing inaccurate flight planning. |
| A maliciously crafted project file may cause a heap-based buffer
overflow in
Fuji Electric Monitouch V-SFT-6, which may allow the attacker to execute arbitrary code. |
| Fuji Electric Monitouch V-SFT-6 is vulnerable to a stack-based buffer
overflow while processing a specially crafted project file, which may
allow an attacker to execute arbitrary code. |
| An issue was discovered in AnyDesk through 9.0.4. A remotely connected user with the "Control my device" permission can manipulate remote AnyDesk settings and create a password for the Full Access profile without needing confirmation from the counterparty. Consequently, the attacker can later connect without this counterparty confirmation. |
| EIP Plus developed by Hundred Plus has an Arbitrary File Uplaod vulnerability, allowing privileged remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| EIP Plus developed by Hundred Plus has a Weak Password Recovery Mechanism vulnerability, allowing unauthenticated remote attacker to predict or brute-force the 'forgot password' link, thereby successfully resetting any user's password. |
| Document Management System developed by Excellent Infotek has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. |
| A vulnerability classified as critical was found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 2.5.0. Affected by this vulnerability is the function executeScript of the file /src/main/java/com/dstz/sys/rest/controller/SysScriptController.java of the component Groovy Script Handler. The manipulation of the argument script leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability classified as critical has been found in Shenzhen Dashi Tongzhou Information Technology AgileBPM up to 2.5.0. Affected is the function parseStrByFreeMarker of the file /src/main/java/com/dstz/sys/rest/controller/SysToolsController.java. The manipulation of the argument str leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: amdtee: fix race condition in amdtee_open_session
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix race condition in hci_cmd_sync_clear
There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.
Here's the call trace:
dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30
Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30 |
