Export limit exceeded: 364725 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (364725 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53422 | 1 Erlang | 3 Erlang/otp, Erlang\/otp, Otp | 2026-07-08 | 4.3 Medium |
| Observable Response Discrepancy vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to enumerate the existence of files and directories outside the configured root directory. The SSH_FXP_REALPATH handler in ssh_sftpd calls relate_file_name/3 with Canonicalize=false, unlike every other SFTP operation handler. This allows .. components in the requested path to bypass the is_within_root/2 check without being resolved. The un-canonicalized path then enters resolve_symlinks/2, which walks up the directory tree above the configured root and issues read_link() syscalls on arbitrary filesystem paths. An authenticated SFTP client can exploit this by sending a REALPATH request with a crafted traversal path. The server response differs depending on whether the target path exists on the host filesystem (SSH_FXP_NAME when the path resolves successfully, SSH_FX_NO_SUCH_FILE when it does not). This creates a path-existence oracle that an attacker can use to enumerate the filesystem structure outside the configured root, including the existence of sensitive files, directories, and mount points. The vulnerability leaks only the existence of paths. No file contents, credentials, or write access are obtainable through this issue alone. The information gained may assist further attacks when combined with other vulnerabilities. This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_op/4. This issue affects OTP from OTP 17.0 until OTP 29.0.3, 28.5.0.3, and 27.3.4.14 corresponding to ssh from 3.0.1 until 6.0.2, 5.5.2.2, and 5.2.11.9. | ||||
| CVE-2026-14647 | 1 Onnx | 1 Onnx | 2026-07-08 | 4.3 Medium |
| A weakness has been identified in onnx up to 1.21.x. This vulnerability affects the function convPoolShapeInference_opset19 of the file onnx/defs/nn/old.cc of the component onnxruntime. This manipulation causes out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Patch name: a7bf3a0f1d18bb62575236ef6e4944980c40e045. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2026-46584 | 1 Apache | 1 Camel Mail | 2026-07-08 | 3.7 Low |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input. | ||||
| CVE-2026-49098 | 1 Apache | 1 Camel | 2026-07-08 | 5.3 Medium |
| Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component. The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source. | ||||
| CVE-2026-49365 | 1 Apache | 1 Camel | 2026-07-08 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component. The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client. | ||||
| CVE-2026-59711 | 1 Showdownjs | 1 Showdown | 2026-07-08 | 6.1 Medium |
| showdown contains a cross-site scripting vulnerability in metadata title handling that allows attackers to inject arbitrary HTML and JavaScript. When completeHTMLDocument option is enabled, unescaped less-than and greater-than characters in markdown frontmatter metadata are inserted directly into HTML title tags, enabling attackers to break out of the title context and execute malicious scripts in the rendered page. | ||||
| CVE-2026-13356 | 1 Mozilla | 1 Firefox For Ios | 2026-07-08 | 6.3 Medium |
| A malicious webpage could interrupt a pending navigation by enqueuing a synchronous JavaScript dialog, causing the browser UI to display the destination origin in the address bar while continuing to render attacker-controlled content. This vulnerability was fixed in Firefox for iOS 152.3. | ||||
| CVE-2026-10840 | 1 Redhat | 3 Openshift, Openshift Builds, Openshift Pipelines | 2026-07-08 | 7.1 High |
| A flaw was found in the OpenShift Pipelines operator. The tekton-scheduler-rolebinding ClusterRoleBinding grants the system:authenticated group write access to Kueue and cert-manager custom resources via the tekton-scheduler-role ClusterRole. When Kueue or cert-manager CRDs are present on the cluster, any authenticated user can disrupt workload scheduling, tamper with scheduling priorities, delete other tenants' Workload objects, or induce cert-manager to overwrite TLS Secrets including the default ingress controller certificate. | ||||
| CVE-2026-9165 | 1 Redhat | 1 Advanced Cluster Security | 2026-07-08 | 7.7 High |
| A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane. | ||||
| CVE-2026-46592 | 1 Apache | 1 Camel | 2026-07-08 | 7.5 High |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. | ||||
| CVE-2026-56139 | 1 Apache | 1 Camel Undertow | 2026-07-08 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component. The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied. | ||||
| CVE-2026-43866 | 1 Apache | 1 Camel | 2026-07-08 | 7.3 High |
| Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component. JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes. | ||||
| CVE-2026-41049 | 1 Presire | 1 Qsnapper | 2026-07-08 | N/A |
| Incorrect caching of authentication between different users of the qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them. | ||||
| CVE-2025-8591 | 1 Wso2 | 16 Api Control Plane, Api Manager, Identity Server and 13 more | 2026-07-08 | 6.1 Medium |
| The software accepts user-supplied input via a URL parameter without adequate output encoding before reflecting it back to the user's browser. This condition allows an attacker to inject malicious script content into pages served by the application. By leveraging this weakness, an attacker can cause the user's browser to redirect to a malicious website, modify the UI of the webpage, or retrieve information from the browser. However, the impact is mitigated by the use of httpOnly flags on session-related cookies, preventing session hijacking. | ||||
| CVE-2026-13122 | 1 Openvpn | 1 Openvpn | 2026-07-08 | 5.3 Medium |
| OpenVPN version 2.6.0 through 2.6.20 and 2.7_alpha1 through 2.7.4 allows remote attackers to cause a denial of service via a malformed authentication token that triggers a reachable assertion when external-auth is enabled | ||||
| CVE-2026-59194 | 1 Pnpm | 1 Pnpm | 2026-07-08 | 7.1 High |
| pnpm is a package manager. Prior to 10.34.4 and 11.7.0, a crafted patch entry could resolve outside the configured patches directory and cause pnpm patch-remove to delete an arbitrary reachable file. This vulnerability is fixed in 10.34.4 and 11.7.0. | ||||
| CVE-2026-59195 | 1 Pnpm | 1 Pnpm | 2026-07-08 | 8.2 High |
| pnpm is a package manager. Prior to 10.34.4 and 11.8.0, pnpm accepts package names from the env lockfile configDependencies section and uses those names directly when creating config dependency symlinks under node_modules/.pnpm-config. A malicious repository can commit a crafted pnpm-lock.yaml whose env-lockfile document contains a traversal-shaped config dependency name. During pnpm install, pnpm installs the config dependency and creates a symlink at a path derived from that name. This vulnerability is fixed in 10.34.4 and 11.8.0. | ||||
| CVE-2026-43825 | 1 Apache | 1 Opennlp | 2026-07-08 | 7.3 High |
| Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel Versions Affected: before 3.0.0-M4 (libsvm document categorization module; introduced in OPENNLP-1808 and only present on the 3.x line) Description: SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled stream with java.io.ObjectInputStream and calls readObject() without an ObjectInputFilter installed. ObjectInputStream materialises every class referenced in the stream before the resulting object is cast to SvmDoccatModel, so the cast that follows readObject() executes only after the foreign object graph has already been deserialised in full. If a Java deserialization gadget chain is available on the consumer's classpath, a crafted payload supplied to deserialize() executes arbitrary code in the JVM that loads it. Apache OpenNLP itself does not ship a known gadget chain, so the realistic risk is to downstream applications that embed the libsvm module alongside vulnerable transitive dependencies. The method is public and static, so any caller can pass an untrusted stream to it directly. The practical impact is remote code execution against processes that load SvmDoccatModel instances from untrusted or semi-trusted origins. Mitigation: 3.x users should upgrade to 3.0.0-M4. Users who cannot upgrade immediately should treat all serialized SvmDoccatModel streams as untrusted input unless their provenance is verified, and should avoid invoking SvmDoccatModel.deserialize() on streams supplied by end users or fetched from third-party sources without integrity checks. | ||||
| CVE-2026-55646 | 1 Vllm-project | 1 Vllm | 2026-07-08 | 6.5 Medium |
| vLLM is an inference and serving engine for large language models. From 0.22.0 to 0.23.0, the /v1/audio/transcriptions and /v1/audio/translations routes call request.file.read() to fully materialize an uploaded audio file into memory before vLLM checks the documented VLLM_MAX_AUDIO_CLIP_FILESIZE_MB compressed upload size limit (default 25 MB) later in the speech-to-text preprocessing step, so an API caller who can reach those routes can submit an oversized multipart upload and cause vLLM to allocate memory proportional to the uploaded file size before the request is rejected as too large, creating memory pressure or terminating the process depending on deployment resource limits. This issue is fixed in version 0.24.0. | ||||
| CVE-2026-54234 | 1 Vllm-project | 1 Vllm | 2026-07-08 | 7.5 High |
| vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Prior to 0.24.0, a frontend-legal multi-request speculative decoding workload can cause the rejection sampler to produce a recovered token equal to the model vocabulary size boundary value, which is then converted to negative one when the engine selects the next live token for a request and is written back into the drafter's input ids; that out-of-vocabulary value is later consumed by the model's embedding and attention path and crashes the engine worker with a GPU device-side assertion. The same triggering request sequence is reachable through the public gRPC Generate and Abort endpoints, so a remote client that can send generation requests can crash the shared engine worker, aborting concurrent requests and causing a service-wide denial of service for other clients of the deployment until the worker is restarted. This issue is fixed in version 0.24.0. | ||||