Export limit exceeded: 20489 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20489 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63924 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. | ||||
| CVE-2026-64081 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Validate framework notification message layout Framework notifications carry an indirect message in the shared RX buffer. Validate the reported offset and size before using them, reject zero-length payloads, and ensure that any non-header payload starts at the UUID field rather than in the middle of the message header. Use the validated offset and size values for both kmemdup() and the UUID parsing path so malformed firmware data cannot drive an out-of-bounds read or an oversized allocation. | ||||
| CVE-2026-64076 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: eb_tables: close module init race sashiko reports for unrelated patch: Does the core ebtables initialization in ebtables.c suffer from a similar race? Once nf_register_sockopt() completes, the sockopts are exposed globally. sockopt has to be registered last, just like in ip/ip6/arptables. | ||||
| CVE-2026-63942 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set. | ||||
| CVE-2026-64053 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. | ||||
| CVE-2026-64024 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Very litle impact on overall code size/complexity: $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta tcp_v6_rcv 3038 3042 +4 tcp_v4_rcv 3035 3039 +4 tcp_conn_request 2938 2923 -15 Total: Before=24436060, After=24436053, chg -0.00% | ||||
| CVE-2026-64035 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. | ||||
| CVE-2026-63884 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- | ||||
| CVE-2026-63978 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request. | ||||
| CVE-2026-64009 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. | ||||
| CVE-2026-64020 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion. | ||||
| CVE-2026-64026 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. | ||||
| CVE-2026-63947 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. | ||||
| CVE-2026-64011 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. | ||||
| CVE-2026-63972 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Skip redundant detach on already-detached port When mana_per_port_queue_reset_work_handler() runs after a previous detach succeeded but attach failed, the port is left in a detached state with apc->tx_qp and apc->rxqs already freed. Calling mana_detach() again unconditionally leads to NULL pointer dereferences during queue teardown. Add an early exit in mana_detach() when the port is already in detached state (!netif_device_present) for non-close callers, making it safe to call idempotently. This allows the queue reset handler and other recovery paths to simply retry mana_attach() without redundant teardown. | ||||
| CVE-2026-64004 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops. | ||||
| CVE-2026-63980 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Use spin_lock_bh for hn_lock nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled. | ||||
| CVE-2026-63992 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. | ||||
| CVE-2026-63994 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | ||||
| CVE-2026-63996 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming. | ||||