Export limit exceeded: 426430 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36467 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36467 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37954 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Avoid race in open_cached_dir with lease breaks A pre-existing valid cfid returned from find_or_create_cached_dir might race with a lease break, meaning open_cached_dir doesn't consider it valid, and thinks it's newly-constructed. This leaks a dentry reference if the allocation occurs before the queued lease break work runs. Avoid the race by extending holding the cfid_list_lock across find_or_create_cached_dir and when the result is checked. | ||||
| CVE-2025-37936 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM. | ||||
| CVE-2025-37921 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: Fix unlocked deletion of default FDB entry When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2025-37873 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix missing ring index trim on error path Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails. | ||||
| CVE-2025-37822 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up. | ||||
| CVE-2025-37798 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue(). | ||||
| CVE-2025-37791 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll() rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct size of rpl is sizeof(*rpl) which should be just 1 byte. Using the pointer size instead can cause stack corruption: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100 CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023 Workqueue: events module_flash_fw_work Call Trace: <TASK> panic+0x339/0x360 ? ethtool_cmis_wait_for_cond+0xf4/0x100 ? __pfx_status_success+0x10/0x10 ? __pfx_status_fail+0x10/0x10 __stack_chk_fail+0x10/0x10 ethtool_cmis_wait_for_cond+0xf4/0x100 ethtool_cmis_cdb_execute_cmd+0x1fc/0x330 ? __pfx_status_fail+0x10/0x10 cmis_cdb_module_features_get+0x6d/0xd0 ethtool_cmis_cdb_init+0x8a/0xd0 ethtool_cmis_fw_update+0x46/0x1d0 module_flash_fw_work+0x17/0xa0 process_one_work+0x179/0x390 worker_thread+0x239/0x340 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2025-37756 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237 | ||||
| CVE-2025-23141 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2025-22124 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb In clustermd, separate write-intent-bitmaps are used for each cluster node: 0 4k 8k 12k ------------------------------------------------------------------- | idle | md super | bm super [0] + bits | | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | So in node 1, pg_index in __write_sb_page() could equal to bitmap->storage.file_pages. Then bitmap_limit will be calculated to 0. md_super_write() will be called with 0 size. That means the first 4k sb area of node 1 will never be updated through filemap_write_page(). This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize. Here use (pg_index % bitmap->storage.file_pages) to make calculation of bitmap_limit correct. | ||||
| CVE-2025-22117 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw() Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. | ||||
| CVE-2025-22045 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs On the following path, flush_tlb_range() can be used for zapping normal PMD entries (PMD entries that point to page tables) together with the PTE entries in the pointed-to page table: collapse_pte_mapped_thp pmdp_collapse_flush flush_tlb_range The arm64 version of flush_tlb_range() has a comment describing that it can be used for page table removal, and does not use any last-level invalidation optimizations. Fix the X86 version by making it behave the same way. Currently, X86 only uses this information for the following two purposes, which I think means the issue doesn't have much impact: - In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be IPI'd to avoid issues with speculative page table walks. - In Hyper-V TLB paravirtualization, again for lazy TLB stuff. The patch "x86/mm: only invalidate final translations with INVLPGB" which is currently under review (see <https://lore.kernel.org/all/[email protected]/>) would probably be making the impact of this a lot worse. | ||||
| CVE-2025-22021 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: socket: Lookup orig tuple for IPv6 SNAT nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to restore the original 5-tuple in case of SNAT, to be able to find the right socket (if any). Then socket_match() can correctly check whether the socket was transparent. However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this conntrack lookup, making xt_socket fail to match on the socket when the packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6. IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as pods' addresses are in the fd00::/8 ULA subnet and need to be replaced with the node's external address. Cilium leverages Envoy to enforce L7 policies, and Envoy uses transparent sockets. Cilium inserts an iptables prerouting rule that matches on `-m socket --transparent` and redirects the packets to localhost, but it fails to match SNATed IPv6 packets due to that missing conntrack lookup. | ||||
| CVE-2025-22013 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees. | ||||
| CVE-2025-21890 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) | ||||
| CVE-2025-21889 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Add RCU read lock protection to perf_iterate_ctx() The perf_iterate_ctx() function performs RCU list traversal but currently lacks RCU read lock protection. This causes lockdep warnings when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y: WARNING: suspicious RCU usage kernel/events/core.c:8168 RCU-list traversed in non-reader section!! Call Trace: lockdep_rcu_suspicious ? perf_event_addr_filters_apply perf_iterate_ctx perf_event_exec begin_new_exec ? load_elf_phdrs load_elf_binary ? lock_acquire ? find_held_lock ? bprm_execve bprm_execve do_execveat_common.isra.0 __x64_sys_execve do_syscall_64 entry_SYSCALL_64_after_hwframe This protection was previously present but was removed in commit bd2756811766 ("perf: Rewrite core context handling"). Add back the necessary rcu_read_lock()/rcu_read_unlock() pair around perf_iterate_ctx() call in perf_event_exec(). [ mingo: Use scoped_guard() as suggested by Peter ] | ||||
| CVE-2025-21884 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: better track kernel sockets lifetime While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2025-21876 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix suspicious RCU usage Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts locally") moved the call to enable_drhd_fault_handling() to a code path that does not hold any lock while traversing the drhd list. Fix it by ensuring the dmar_global_lock lock is held when traversing the drhd list. Without this fix, the following warning is triggered: ============================= WARNING: suspicious RCU usage 6.14.0-rc3 #55 Not tainted ----------------------------- drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by cpuhp/1/23: #0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 #1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 stack backtrace: CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55 Call Trace: <TASK> dump_stack_lvl+0xb7/0xd0 lockdep_rcu_suspicious+0x159/0x1f0 ? __pfx_enable_drhd_fault_handling+0x10/0x10 enable_drhd_fault_handling+0x151/0x180 cpuhp_invoke_callback+0x1df/0x990 cpuhp_thread_fun+0x1ea/0x2c0 smpboot_thread_fn+0x1f5/0x2e0 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x12a/0x2d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4a/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat about a possible deadlock between dmar_global_lock and cpu_hotplug_lock. This is avoided by not holding dmar_global_lock when calling iommu_device_register(), which initiates the device probe process. | ||||
| CVE-2025-21839 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated--- | ||||
| CVE-2025-21836 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: reallocate buf lists on upgrade IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it was created for legacy selected buffer and has been emptied. It violates the requirement that most of the field should stay stable after publish. Always reallocate it instead. | ||||