Export limit exceeded: 408622 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408622 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72440 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix writes_pending and barrier reference leaks on write failures raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. | ||||
| CVE-2026-72439 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending leak on write request failures raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails. | ||||
| CVE-2026-72423 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard conntrack opts error writes The conntrack lookup and allocation kfuncs take an opts pointer together with an opts__sz argument. The verifier checks only the memory range described by opts__sz, but the wrappers unconditionally write opts->error whenever the internal lookup or allocation helper returns an error. For an invalid size smaller than the end of opts->error, that write can land outside the verifier-checked range. Keep returning NULL for invalid arguments, but only report the error through opts->error when the supplied size includes the field. This preserves error reporting for the supported 12-byte and 16-byte layouts, and for other invalid sizes that still include opts->error. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72388 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock Since dma_fence objects can be shared with other subsystems, they may be accessed from hardirq context in those drivers, and we have to take that into account by also using the IRQ-safe variant when acquiring the lock. While at it, switch to the guard model. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72370 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: release pages on atomic dio size mismatch If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a short bio, the REQ_ATOMIC size check rejects it before submission. The old error path only dropped the bio reference, leaving any pages already attached to the bio unreleased. Release or unbounce the pages before falling through to out_put_bio on this error path. This bug was reported by sashiko: https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com | ||||
| CVE-2026-72345 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | ||||
| CVE-2026-72337 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary work item and schedules do_enable_set() on system_wq, then returns to debugfs. The debugfs active operation has ended at that point, but the worker still executes module text and manipulates enable_6lowpan and listen_chan. bt_6lowpan_exit() removes the debugfs files and immediately closes and puts listen_chan. It has no pointer to the queued work item, so it cannot cancel or flush it before tearing down the state that the worker uses. The buggy scenario involves two paths, with each column showing the order within that path: debugfs enable write module exit 1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes set_enable work the debugfs file 2. schedule_work() queues 2. bt_6lowpan_exit() closes do_enable_set() and puts listen_chan 3. the write operation returns 3. module teardown can continue 4. do_enable_set() later runs against stale state Run the enable state transition synchronously in lowpan_enable_set() instead. The simple debugfs setter can sleep, and this file already handles the 6LoWPAN control write synchronously under the same set_lock. Once the setter returns, debugfs removal covers the whole operation and exit can no longer race with an untracked work item. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0 Workqueue: events do_enable_set [bluetooth_6lowpan] The buggy address belongs to the object at ffff888109cb8000 | ||||
| CVE-2026-72331 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix VMA access race aie2_populate_range() and amdxdna_umap_release() access a saved VMA pointer that may have already been freed, leading to a potential use-after-free. Remove the VMA accesses from these functions to avoid the race. | ||||
| CVE-2026-72329 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | ||||
| CVE-2026-72091 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject user command submission without a command BO amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is skipped, leaving it NULL, and no check rejects it on the user path (the !job->cmd_bo guard lives inside the != INVALID branch). The job is then armed and pushed to the DRM scheduler. aie2_sched_job_run() takes the drv_cmd == NULL path and calls amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) -> to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker. A process with access to the accel node on a system with a probed AMD NPU can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl (cmd_handles = 0). Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO) legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd. Reject the invalid handle for user submissions (drv_cmd == NULL) at the submit choke point so every user path is covered. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-72031 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host. | ||||
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68441 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Handle TC_ACT_REDIRECT from qdisc filter chains When a TC filter attached to a qdisc filter chain returns TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an act_bpf action), the redirect was silently lost i.e no qdisc classify function handled TC_ACT_REDIRECT, so the packet fell through the switch and was enqueued normally instead of being redirected. This has been broken since bpf_redirect() was introduced for TC in commit 27b29f63058d ("bpf: add bpf_redirect() helper"). We got lucky for a long time because bpf_net_context was a per-CPU variable that was always available. commit 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.") turned bpf_net_context into a task_struct member that is only set up by explicit callers. Without a caller setting it up, bpf_redirect() itself crashes with a NULL pointer dereference in bpf_net_ctx_get_ri(). However, even with bpf_net_context available, TC_ACT_REDIRECT from qdisc filter chains cannot be honored without adding skb_do_redirect() calls to every qdisc classify function, which would require changes across net/sched/. Isolate it to ebpf core where it belongs. Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a wrapper around tcf_classify() for use by qdisc classify functions and tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT, the wrapper converts it to TC_ACT_SHOT, dropping the packet rather than letting it continue silently. Dropping is preferred over letting the packet through because the user immediately sees packet loss. Silently passing the packet through would hide the problem and leave the user wondering why their redirect is not working. The clsact fast path, tc_run() continues to call tcf_classify() directly and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by sch_handle_egress/ingress() calling skb_do_redirect() as before. | ||||
| CVE-2026-68436 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use kvzalloc to allocate struct dc struct dc has grown large over time (most of it the two inlined dc_scratch_space copies) and now sits close to the page allocator's 4 MiB contiguous allocation limit. Its actual size is not fixed by the source alone, it also depends on the compiler and the .config, so it can easily cross 4 MiB, e.g. with a newer GCC or a config change. dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER, so the page allocator warns and returns NULL. dc_create() then fails, DM init fails and amdgpu probe aborts with -EINVAL: WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380 dc_create+0x38/0x660 [amdgpu] amdgpu_dm_init+0x2d9/0x510 [amdgpu] dm_hw_init+0x1b/0x90 [amdgpu] amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu] amdgpu_driver_load_kms+0x19/0x80 [amdgpu] amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu] dc_create() then returns NULL and DM init fails, which aborts the whole GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block <dm> failed -22"), leaving the display unusable. The subsequent amdgpu_irq_put() warnings during teardown are just fallout of unwinding a half-initialized device. struct dc is a software-only bookkeeping structure that is never handed to hardware DMA and is only ever kept as an opaque pointer, so it does not require physically contiguous memory. Allocate it with kvzalloc() (and free it with kvfree()) so that the allocator can fall back to vmalloc() when a contiguous allocation of that size is not available, which also avoids the MAX_PAGE_ORDER warning entirely. v2: - Rebase to amd-staging-drm-next. (cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68383 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) | ||||
| CVE-2026-68382 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) | ||||