Export limit exceeded: 417330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417330 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93230 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier Gigantic bootmem HugeTLB pages are currently initialized from hugetlb_init(), but page_alloc_init_late() runs earlier and walks pageblocks to determine zone contiguity. If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can observe still-uninitialized struct pages through __pageblock_pfn_to_page(). This may not trigger an immediate failure, but it can make set_zone_contiguous() compute the wrong zone contiguity state. If extra poisoned-page checks are added in this path, such as PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot panic. Initialize gigantic bootmem HugeTLB struct pages from page_alloc_init_late(), before zone contiguity is evaluated, so later page allocator setup only sees valid struct page state. This also makes the initialization order more natural, as struct pages should be initialized before later code inspects them. | ||||
| CVE-2026-93221 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: convert nfsd_net boolean flags to unsigned long flags word nfsd_net contains several boolean fields that are accessed from concurrent contexts without serialization. In particular, nfsd4_end_grace() guards its drain path with a plain bool: if (nn->grace_ended) return; nn->grace_ended = true; The read and the write are independent, and nothing in struct nfsd_net serializes them. At least two contexts can reach this code with no lock held: laundromat path laundry_wq kworker nfs4_laundromat() nfsd4_end_grace() RECLAIM_COMPLETE path nfsd compound kthread nfsd4_reclaim_complete() inc_reclaim_complete() nfsd4_end_grace() Both callers can observe grace_ended == false on different CPUs, both store true, and both proceed into nfsd4_record_grace_done(), which invokes the active client_tracking_ops->grace_done callback. For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops via nfsd4_recdir_purge_old, and the cld v1+ ops via nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(), which walks every bucket of reclaim_str_hashtbl with no lock and calls nfs4_remove_reclaim_record() (list_del + kfree) on each entry. Two concurrent walkers corrupt the list and double-free every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client() iterating the same bucket reads through freed memory. A third call site exists in nfs4_state_start_net() on the skip_grace startup path, but it runs under nfsd_mutex before any client has connected and before the laundromat's first delayed work fires, so it cannot race with the two callers above. Replace the scattered boolean fields in nfsd_net with a single unsigned long flags word and an enum nfsd_net_flag for the bit positions. The grace_ended race is fixed by using test_and_set_bit(), which is atomic on all architectures. The remaining flags (grace_end_forced, in_grace, somebody_reclaimed, track_reclaim_completes, nfsd_net_up, lockd_up) are converted to use test_bit/set_bit/clear_bit for consistency. This avoids sub-word cmpxchg issues on architectures like Hexagon that only support word-sized atomic operations. | ||||
| CVE-2026-93216 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg() print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the start to guard against tail pages and NULL data. However, it later re-reads page->memcg_data locklessly in two places: 1: page_memcg_check(page) 2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS) If the page is concurrently freed and reallocated as a THP tail page or slab page between these calls, the VM_BUG_ON assertions can trigger on CONFIG_DEBUG_VM=y builds, crashing the kernel. Fix both TOCTOU issues by using the memcg_data snapshot throughout. | ||||
| CVE-2026-93181 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering. | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-93090 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Clean up channels on setup failure scmi_channels_setup() can fail after the common BASE channel or earlier protocol channels have already been registered in the TX/RX IDRs. Route this failure through the existing channel cleanup label so the transport channels, transport devices and IDR state created before the failure are released before the probe error path frees the SCMI instance ID. | ||||
| CVE-2026-93083 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind TX receiver mailbox setup failure mailbox_chan_setup() can request an additional unidirectional TX receiver channel after successfully acquiring the primary channel. If that second request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts. | ||||
| CVE-2026-92519 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. Fix this by adding the missing kfree(jit_data->ctx.offset) in bpf_jit_free(). | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90424 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits it, and preallocates its logical VCMDQs. Two of its error paths leak. When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach it; free it directly there. A later VCMDQ preallocation failure instead leaves VINTF0 published, and so this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag only afterward, from a HW read-back, so the still-uninited VINTF0 reads as guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields it never set up. Decide ownership from vintf->idx instead, the index assigned when its id is allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure HW-readback state. | ||||
| CVE-2026-90422 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path When mtk_clk_register_pllfhs function fails to register a PLL, it unregisters all PLLs and cleans up itself in its error path before returning, so the function callers don't need to do it. But contrary to mtk_clk_unregister_pllfhs function, that does almost the same sequence, it does not free the IO memory mapped on fhctl node, leading to a leak. Fix this leak by factorizing the cleanup sequence in a new private function and use it both mtk_clk_register_pllfhs and mtk_clk_unregister_pllfhs functions. Also, change the loop index start value to avoid the -1 operation on index at each loop. | ||||
| CVE-2026-90409 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Add vm_bind region with kbo range overlap check When a VM is created, caller has to specify the range of the address space carve-out set aside for mapping kernel BO's. That means vm_bind mappings of UM-exposed BO's should not intersect with that region, but at the moment we're not checking this. At first, I thought of giving these values to drm_gpuvm_init() through its reserve_{offset, range} arguments, but it turns out that is meant for VM address spans that are not managed through the usual drm_gpuvm split/merge circuit, so storing the end of the user VA range at VM creation time and doing a quick check in the vm_bind ioctl path was the simplest workaround. The new check also makes sure vm_bind range doesn't overflow the size of a 64-bit unsigned integer. That was already being done further down the call stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to fail early in the driver before GPUVM functions are invoked so that we won't waste time allocating vm_bind context resources. | ||||
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90397 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published In qcom_scm_probe(), devm_request_threaded_irq() is called before smp_store_release(&__scm, scm). Two paths can dereference __scm before it is published, both causing a NULL pointer dereference. The IRQ handler receives scm via its data argument but passes only wq_ctx to qcom_scm_waitq_wakeup() and qcom_scm_get_completion(), which then dereference __scm directly. Thread scm through both functions so the IRQ handler path never touches __scm. Non-atomic SMC calls made during probe (e.g. from qcom_tzmem_init via qcom_scm_shm_bridge_enable) can return WAITQ_SLEEP, causing qcom_scm_wait_for_wq_completion() to run before __scm is published and dereference it. Add platform_set_drvdata(pdev, scm) early in probe and change qcom_scm_wait_for_wq_completion() to take the device pointer and use dev_get_drvdata() to reach scm, removing any dependency on __scm. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/ | ||||
| CVE-2026-90359 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject >8 byte return values on return-reading trampoline paths btf_distill_func_proto() builds the function model used for the fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has accepted a 16-byte __int128 return value since the trampoline was introduced: __get_type_size() returns the integer's type size, and the return-type check only rejected ret < 0. But the BPF trampoline preserves only 8 bytes of the return value (RAX on x86, i.e. R0). For an attach type that reads the target's return value the second half (RDX / R3) is neither saved nor restored, so a program attached to a function returning a 16-byte value corrupts the value seen by the real caller and itself observes only half of it. struct_ops trampolines have the same limitation. This affects the attach types that read the target's return value: fexit, fmod_ret and fsession (plus the _multi variants of fexit and fsession), and struct_ops. fentry/fentry_multi run before the target returns and are unaffected. Reject a >8 byte return value for these attach types in bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for struct_ops in bpf_struct_ops_desc_init(). | ||||