Export limit exceeded: 22697 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22697 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68248 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vmw_balloon: indicate success when effectively deflating during migration When migrating a balloon page, we first deflate the old page to then inflate the new page. However, if inflating the new page succeeded, we effectively deflated the old page, reducing the balloon size. In that case, the migration actually worked: similar to migrating+ immediately deflating the new page. The old page will be freed back to the buddy. Right now, the core will leave the page be marked as isolated (as we returned an error). When later trying to putback that page, we will run into the WARN_ON_ONCE() in balloon_page_putback(). That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()"); before that change, we would have tolerated that way of handling it. To fix it, let's just return 0 in that case, making the core effectively just clear the "isolated" flag + freeing it back to the buddy as if the migration succeeded. Note that the new page will also get freed when the core puts the last reference. Note that this also makes it all be more consistent: we will no longer unisolate the page in the balloon driver while keeping it marked as being isolated in migration core. This was found by code inspection. | ||||
| CVE-2025-68236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors. | ||||
| CVE-2025-68235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a kmemleak warning. Make sure this data is deallocated. | ||||
| CVE-2025-68233 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Add call to put_pid() Add a call to put_pid() corresponding to get_task_pid(). host1x_memory_context_alloc() does not take ownership of the PID so we need to free it here to avoid leaking. [[email protected]: reword commit message] | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-68225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lib/test_kho: check if KHO is enabled We must check whether KHO is enabled prior to issuing KHO commands, otherwise KHO internal data structures are not initialized. | ||||
| CVE-2022-50571 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: call __btrfs_remove_free_space_cache_locked on cache load failure Now that lockdep is staying enabled through our entire CI runs I started seeing the following stack in generic/475 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0 CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0 RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010 R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80 FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0 Call Trace: __btrfs_remove_free_space_cache+0x27/0x30 load_free_space_cache+0xad2/0xaf0 caching_thread+0x40b/0x650 ? lock_release+0x137/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_is_held_type+0xe2/0x140 process_one_work+0x271/0x590 ? process_one_work+0x590/0x590 worker_thread+0x52/0x3b0 ? process_one_work+0x590/0x590 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This is the code ctl = block_group->free_space_ctl; discard_ctl = &block_group->fs_info->discard_ctl; lockdep_assert_held(&ctl->tree_lock); We have a temporary free space ctl for loading the free space cache in order to avoid having allocations happening while we're loading the cache. When we hit an error we free it all up, however this also calls btrfs_discard_update_discardable, which requires block_group->free_space_ctl->tree_lock to be held. However this is our temporary ctl so this lock isn't held. Fix this by calling __btrfs_remove_free_space_cache_locked instead so that we only clean up the entries and do not mess with the discardable stats. | ||||
| CVE-2025-68222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. | ||||
| CVE-2025-68220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. | ||||
| CVE-2025-68219 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot | ||||
| CVE-2025-68217 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: pegasus-notetaker - fix potential out-of-bounds access In the pegasus_notetaker driver, the pegasus_probe() function allocates the URB transfer buffer using the wMaxPacketSize value from the endpoint descriptor. An attacker can use a malicious USB descriptor to force the allocation of a very small buffer. Subsequently, if the device sends an interrupt packet with a specific pattern (e.g., where the first byte is 0x80 or 0x42), the pegasus_parse_packet() function parses the packet without checking the allocated buffer size. This leads to an out-of-bounds memory access. | ||||
| CVE-2025-40217 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pidfs: validate extensible ioctls Validate extensible ioctls stricter than we do now. | ||||
| CVE-2025-68216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ | ||||
| CVE-2025-68215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded | ||||
| CVE-2025-40228 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: catch commit test ctx alloc failure Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation". DAMON sysfs interface dynamically allocates and uses a damon_ctx object for testing if given inputs for online DAMON parameters update is valid. The object is being used without an allocation failure check, and leaked when the test succeeds. Fix the two bugs. This patch (of 2): The damon_ctx for testing online DAMON parameters commit inputs is used without its allocation failure check. This could result in an invalid memory access. Fix it by directly returning an error when the allocation failed. | ||||
| CVE-2025-40232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rv: Fully convert enabled_monitors to use list_head as iterator The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the iterator as struct rv_monitor *, while others treat the iterator as struct list_head *. This causes a wrong type cast and crashes the system as reported by Nathan. Convert everything to use struct list_head * as iterator. This also makes enabled_monitors consistent with available_monitors. | ||||
| CVE-2025-40234 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers Devices without the AWCC interface don't initialize `awcc`. Add a check before dereferencing it in sleep handlers. | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-68210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: avoid infinite loop due to incomplete zstd-compressed data Currently, the decompression logic incorrectly spins if compressed data is truncated in crafted (deliberately corrupted) images. | ||||
| CVE-2025-68209 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlx5: Fix default values in create CQ Currently, CQs without a completion function are assigned the mlx5_add_cq_to_tasklet function by default. This is problematic since only user CQs created through the mlx5_ib driver are intended to use this function. Additionally, all CQs that will use doorbells instead of polling for completions must call mlx5_cq_arm. However, the default CQ creation flow leaves a valid value in the CQ's arm_db field, allowing FW to send interrupts to polling-only CQs in certain corner cases. These two factors would allow a polling-only kernel CQ to be triggered by an EQ interrupt and call a completion function intended only for user CQs, causing a null pointer exception. Some areas in the driver have prevented this issue with one-off fixes but did not address the root cause. This patch fixes the described issue by adding defaults to the create CQ flow. It adds a default dummy completion function to protect against null pointer exceptions, and it sets an invalid command sequence number by default in kernel CQs to prevent the FW from sending an interrupt to the CQ until it is armed. User CQs are responsible for their own initialization values. Callers of mlx5_core_create_cq are responsible for changing the completion function and arming the CQ per their needs. | ||||