Export limit exceeded: 14147 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378301 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378301 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74339 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | ||||
| CVE-2026-74341 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | ||||
| CVE-2026-74343 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: fix xattr race condition with multiple superblocks Multiple superblocks with different namespaces can share the same kernfs_node when kernfs_test_super() finds a matching root but different namespace. This means multiple inodes from different superblocks can reference the same kernfs_node->iattr->xattrs structure. The VFS layer only holds per-inode locks during xattr operations, which is insufficient to serialize concurrent xattr modifications on the shared kernfs_node. This can lead to race conditions in simple_xattr_set() where the lookup->replace/remove sequence is not atomic with respect to operations from other superblocks. Fix this by protecting xattr operations with the existing hashed kernfs_locks->open_file_mutex[] array, which is already used to protect per-node open file data. The hashed mutex array provides scalable per-node serialization (scaled by CPU count, up to 1024 locks on 32+ CPU systems) with zero memory overhead. Changes: - Rename open_file_mutex[] to node_mutex[] to reflect dual purpose - Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers - Protect simple_xattr_set() calls in kernfs_xattr_set() and kernfs_vfs_user_xattr_set() with the hashed mutex - Update file.c to use new helpers via compatibility wrappers - Update documentation to explain the extended lock usage | ||||
| CVE-2026-74349 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74351 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-74352 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails The global pointer 'reserved_mem' continues to reference the reserved_mem_array which lives in __initdata if alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is exported for post-init use, that would dereference freed memory and trigger a use-after-free. So reset reserved_mem_count to 0 when alloc_reserved_mem_array() fails. | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74357 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump The ring content dump in amdgpu_coredump() uses two separate loops over adev->rings[]: the first counts rings with unsignalled fences to size the allocation, and the second copies ring data into the allocated buffers. Both loops use the same condition to skip rings: atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq Because last_seq is an atomic that is updated concurrently by the fence signalling path, additional rings may appear unsignalled in the second loop that were signalled during the first. When this happens, idx exceeds the allocated ring_count and the store to coredump->rings[idx] writes past the end of the kcalloc-ed buffer. This was found during IGT stressful test amd_queue_reset which triggers random GPU resets. The OVERSIZE subtest (CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes a ring timeout and subsequent coredump, which hits the race between the counting and copying loops. The failure is non-deterministic and depends on fence signalling timing during the reset. KASAN log: BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu] Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625 CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35 Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] Call Trace: <TASK> dump_stack_lvl+0xa5/0x110 print_report+0xd1/0x660 kasan_report+0xf3/0x130 __asan_report_store4_noabort+0x17/0x30 amdgpu_coredump+0x1274/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] drm_sched_job_timedout+0x194/0x5c0 [gpu_sched] process_one_work+0x84b/0x1990 worker_thread+0x6b8/0x11b0 </TASK> Allocated by task 23625: kasan_save_stack+0x39/0x70 __kasan_kmalloc+0xc3/0xd0 __kmalloc_noprof+0x2ec/0x910 amdgpu_coredump+0x5c5/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] The buggy address belongs to the object at ffff888106154200 which belongs to the cache kmalloc-rnd-09-96 of size 96 The buggy address is located 16 bytes to the right of allocated 72-byte region [ffff888106154200, ffff888106154248) 72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3 but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes past the allocation. Fix by adding an idx < ring_count guard to the copy loop so it cannot exceed the allocated count even when the fence state changes between the two passes. | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74360 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps for bpf_map_elem iterators Exclusive maps (aka excl_prog_hash) are meant to be reachable only from the single program whose hash matches. This is enforced by check_map_prog_compatibility() when the map is referenced from a program such as signed BPF loaders. A bpf_map_elem iterator, however, binds its target map at attach time in bpf_iter_attach_map() instead of referencing it from the program, so the exclusivity check is never reached. On top of that, the iterator exposes the map value as a writable buffer. | ||||
| CVE-2026-74362 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext2: fix ignored return value of generic_write_sync() Fix ext2_dio_write_iter() to propagate the error returned by generic_write_sync() instead of silently discarding it, which could cause write(2) to return success to userspace on O_SYNC/O_DSYNC files even when the sync failed. The correct pattern, already used in ext2_dax_write_iter() in the same file and in ext4, xfs, f2fs among others, is: if (ret > 0) ret = generic_write_sync(iocb, ret); Found by Linux Verification Center (linuxtesting.org) with SVACE. [JK: Reflect also filemap_write_and_wait() return value] | ||||
| CVE-2026-74267 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||