Export limit exceeded: 378796 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378796 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72091 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject user command submission without a command BO amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is skipped, leaving it NULL, and no check rejects it on the user path (the !job->cmd_bo guard lives inside the != INVALID branch). The job is then armed and pushed to the DRM scheduler. aie2_sched_job_run() takes the drv_cmd == NULL path and calls amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) -> to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker. A process with access to the accel node on a system with a probed AMD NPU can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl (cmd_handles = 0). Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO) legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd. Reject the invalid handle for user submissions (drv_cmd == NULL) at the submit choke point so every user path is covered. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-72094 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-fence: Fix potential NULL pointer dereference The commit mentioned in the fixes tag below introduced a mechanism through which fence producers can fully decouple from fence consumers. This, desirable, mechanism is based on the fence's signaled-bit as the "decoupling point". A sophisticated interaction between RCU and atomic instructions attempts to ensure that fence consumers can still interact with fence producers through the dma_fence_ops (callback pointers into the producer). This is the desired behavior: to check for decoupling, the signaled-bit is first checked. If it's not yet signaled, RCU ensures that the ops pointer cannot yet be NULL. Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit, and then sets the ops pointer to NULL. Readers first load the ops pointer, and then check through the signaled-bit whether the pointer can legally be accessed. These set and load operations could occur out of order on weakly ordered platforms. This problem can be solved very elegantly by using the ops pointer itself as the synchronization point. The pointer is either NULL, or cannot become NULL while it is being used thanks to RCU. Replace the signaled-bit check in dma_fence_timeline_name() and dma_fence_driver_name(). | ||||
| CVE-2026-72155 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic. | ||||
| CVE-2026-72183 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). For a process group (PIDTYPE_PGID) pid_task() returns only one member; recording is skipped whenever that member shares the caller's thread group, and hook_file_send_sigiotask() then lets the signal fan out to the whole group unchecked. Record the domain for every non single-process target so the scope is enforced against each group member at delivery time. That recording is necessary but not sufficient on its own: the kernel signals a process group through its members' thread-group leaders, and the leader of the registrant's own process can carry a different Landlock domain than the sibling thread that armed the owner. domain_is_scoped() would then deny that leader, even though commit 18eb75f3af40 ("landlock: Always allow signals between threads of the same process") requires same-process delivery to be allowed. hook_task_kill() avoids this by evaluating same_thread_group() live, per recipient; the SIGIO path instead delegates the whole decision to a single registration-time check, which a process-group fan-out cannot honor. So also record the registrant's thread group next to its domain and exempt it at delivery: hook_file_send_sigiotask() allows the signal whenever the recipient belongs to the registrant's own process, restoring the same-process guarantee while keeping out-of-domain group members blocked. The direct kill() path (hook_task_kill) already evaluates the live domain and is unaffected. [mic: Check pid_type earlier and improve comment, fix commit message, fix comment formatting] | ||||
| CVE-2026-72189 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fail attrlist updates when the superblock is inactive generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes. If eviction selects the fake inode for a base inode's unnamed $ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's reference on the base inode while the fake inode is still hashed and marked I_FREEING. That iput can synchronously write back the base inode. The writeback path may update mapping pairs and call ntfs_attrlist_update(), which unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake inode. VFS then finds the I_FREEING inode and waits for eviction to finish, but the current task is still inside that eviction path, causing a self-deadlock in find_inode(). Fix this by mirroring the teardown guard used by __ntfs_write_inode(): once SB_ACTIVE has been cleared, do not try to iget the attribute-list fake inode. Return -EIO so teardown aborts the update instead of waiting on the inode it is evicting. | ||||
| CVE-2026-72220 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: harden rq_procinfo lifecycle to prevent double-free The svc_release_rqst() function executes the callback inside rqstp->rq_procinfo->pc_release. However, if a worker thread begins processing a new request and encounters an early error path (e.g., unsupported protocol, short frame, or bad auth) before a valid rq_procinfo is installed, a stale release hook can be re-triggered against reused state from the previous RPC, resulting in a double-free or use-after-free vulnerability. Harden the lifecycle of rq_procinfo by: 1. Ensuring svc_release_rqst() always clears rq_procinfo after the optional pc_release() call, regardless of whether the hook exists. 2. Explicitly clearing rq_procinfo at request entry in svc_process() before any early decode or drop paths. 3. Ensuring svc_process_bc() does the same at backchannel entry. This guarantees that error flows will not encounter a non-NULL stale rq_procinfo pointer when there is nothing to release. | ||||
| CVE-2026-72247 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix zone comparison in tuple dedup The "already exists" dedup logic in __nf_conncount_add() decides whether a connection has already been counted and can be skipped instead of incrementing the connlimit count. It compares the conntrack zone of a list entry with the zone of the connection being added using nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or zone->dir as the direction argument. Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0 and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask: NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction shifts the meaning of every non-zero value. An ORIG-only zone passes 1 and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and test bits beyond the valid direction range. In those cases nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using the real zone id, so different zones can be treated as equal and dedup collapses to tuple equality alone. nf_conncount stores and compares the original-direction tuple for a connection. If an skb already has an attached conntrack entry, get_ct_or_tuple_from_skb() explicitly copies ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's ctinfo. Therefore the zone comparison in the tuple dedup path must use IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a zone id applies, not which direction this conncount tuple represents. Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly. Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional zone contains the ORIG bit, so it naturally returns the real zone id; reply-only zones continue to fall back for original-direction tuple comparisons. | ||||
| CVE-2026-72248 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: support IPIP tunnel with direct xmit The combination of IPIP tunnel with direct xmit, eg. bridge device, breaks because no dst_entry is provided to check the skb headroom and to set the iph->frag_off field. This leads to invalid dst usage and can trigger a crash in the tunnel transmit path. Fix this by moving dst_cache and dst_cookie out of the runtime union so that they can be shared by neighbour, xfrm, and direct tunnel flows. For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve route state in these shared fields and release it through the common dst release path. Since dst_entry is now available to the three supported xmit modes and dst_release() already deals with NULL dst, remove the xmit type check in nft_flow_dst_release(). Moreover, skip the check if the dst entry is NULL in nf_flow_dst_check() which is now the case for the direct xmit case. Based on patch from Rein Wei <[email protected]>. | ||||
| CVE-2026-72259 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_reserved_mem_device_init() and falls back to preallocated buffers when no reserved memory region is available. When the reserved memory assignment succeeds, however, the driver never releases it. Register a devm cleanup action after a successful reserved-memory assignment so the assignment is released on probe failure and driver unbind. | ||||
| CVE-2026-72287 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Move vTPR vs. TPR Threshold consistency check into "normal" checks Move the off-by-default consistency check for vmcs12.tpr_threshold vs. the virtual APIC vTPR into the "normal" controls checks, as waiting until KVM has loaded some amount of state is unnecessary and actively dangerous. Specifically, failure to unwind vmcs01.GUEST_CR3 to KVM's value when EPT is disabled results in KVM running L1 with an L1-controlled CR3, not with KVM's CR3! Alternatively, KVM could simply reset the MMU to force a reload of vmcs01.GUEST_CR3, but the _only_ reason the check was shoved into a "late" flow was to wait until the vmcs12 pages were retrieved. Rather than build up more crusty code, simply access vTPR using a regular guest memory access (performance isn't a concern). To circumvent the restrictions that led to KVM deferring nested_get_vmcs12_pages(), (a) use a VM-scoped API to read guest memory so that it always hits non-SMM memslots (for RSM), and (b) skip the check (since its off-by-default anyways) when the vCPU doesn't want to run, i.e. when userspace is restoring/stuffing state. If reading guest memory fails, simply skip the consistency check, as KVM's de facto ABI is that VMX instruction accesses to non-existent memory get PCI Bus Error semantics, where reads return 0xFFs. And if vTPR=0xFF, then the vTPR is guaranteed to be greater than or equal to TPR_THRESHOLD. | ||||
| CVE-2026-72308 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | ||||
| CVE-2026-72430 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix nf_connlabels leak on two error paths tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when TCA_CT_LABELS is present, but two later error sites use a bare return instead of "goto err", skipping the err: nf_connlabels_put() cleanup. They also precede the "p->put_labels = put_labels" assignment, so the tcf_ct_params_free() fallback does not release the count either. Each failed RTM_NEWACTION on these paths leaks one nf_connlabels reference: net->ct.labels_used is incremented and never released. The action is reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged user namespace on default-userns kernels. Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace (e.g. via user namespaces) leaks one nf_connlabels reference per failed RTM_NEWACTION on the two error paths; net->ct.labels_used is never released. The err: label is safe to reach from both sites: p->tmpl is still NULL there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so no inline release is needed. | ||||
| CVE-2026-72472 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach. Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead, this is inadequate since a single inode can have multiple nfs4_state instances. Therefore, the fix is to also use nfsi->rwsem in this case. Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), the functions nfs4_locku_done and nfs4_lock_done also break this rule because they call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding this protection could cause many deadlocks, so instead, the call to locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), it has been resolved after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering state recovery") because all slots are drained before calling nfs4_do_reclaim, which prevents concurrent stateid changes along this path. Also, nfs_delegation_claim_locks does not cause this concurrency either since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is sent, so nfs4_lock_done is not called. Therefore, nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first time the stateid is set. | ||||
| CVE-2026-74243 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-08-18 | 6.5 Medium |
| A flaw was found in Red Hat Quay. When the SECURITY_SCANNER_V4_PSK (pre-shared key) is not set, a remote unauthenticated attacker can send POST requests to the security scanner notification endpoint. This allows the attacker to flood the notification queue and inject path traversal characters into Clair API URL paths. The primary consequence is worker resource exhaustion and blind path manipulation on the configured Clair host, potentially leading to a denial of service. | ||||
| CVE-2026-73683 | 1 Laravel | 1 Socialite | 2026-08-18 | 8.1 High |
| Laravel Socialite's Facebook provider contains an authentication bypass vulnerability that allows unauthenticated attackers to replay captured OIDC id_tokens by exploiting the missing nonce claim validation in the getUserByOIDCToken() function within FacebookProvider.php. Attackers who obtain a valid, unexpired id_token issued for the same Facebook App ID can submit the captured token to the backend userFromToken() endpoint, bypassing authentication controls because signature, aud, and iss checks pass while no session-bound nonce comparison is performed, resulting in unauthorized access to victim accounts. | ||||
| CVE-2026-73053 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-18 | 9 Critical |
| SiYuan versions before v3.7.4 contain a cross-site scripting vulnerability in the unicode2Emoji function that fails to sanitize codepoint branch output. Attackers can craft document icons with hex-encoded markup that executes in the renderer with Node integration enabled, achieving arbitrary code execution on the host system. | ||||
| CVE-2026-73045 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-18 | 7.5 High |
| SiYuan before 3.7.4 contains an improper restriction of excessive authentication attempts vulnerability in the authFilePublishAccess endpoint that allows unauthenticated attackers to brute-force per-notebook publish passwords. Attackers can submit unbounded password guesses without rate limiting or CAPTCHA to gain access to password-protected published notebooks. | ||||
| CVE-2026-72810 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-18 | 8.6 High |
| SiYuan versions before v3.7.4 contain a publish-boundary bypass vulnerability in WebSocket broadcast sessions that allows anonymous readers to receive unfiltered edits. Attackers can establish a WebSocket connection to the publish surface and passively receive real-time content events including password-protected and forbidden documents without authentication. | ||||
| CVE-2026-19926 | 1 Evergreen | 1 Evergreen | 2026-08-18 | 7.3 High |
| A vulnerability has been found in Evergreen up to 3.14.11/3.15.11/3.16.5/3.17-beta1. The affected element is an unknown function of the file /osrf-gateway-v1 of the component open-ils.fielder OpenSRF Service. Such manipulation leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.14.12, 3.15.12, 3.16.6 and 3.17-beta2 is sufficient to fix this issue. The affected component should be upgraded. | ||||
| CVE-2026-19921 | 1 Code-projects | 1 Online Shopping System | 2026-08-18 | 6.3 Medium |
| A vulnerability was identified in code-projects Online Shopping System 1.0. Affected by this vulnerability is an unknown functionality of the file /homeaction.php. Such manipulation of the argument cat_id leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. | ||||