Export limit exceeded: 383540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 383540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 383540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (383540 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80569 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer rmi_f54_work() reads a diagnostics report from the device into f54->report_data, sizing the transfer with rmi_f54_get_report_size(): report_size = rmi_f54_get_report_size(f54); ... for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { int size = min(F54_REPORT_DATA_SIZE, report_size - i); ... rmi_read_block(.., f54->report_data + i, size); } report_data is allocated once at probe from F54's own electrode counts (array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))), but rmi_f54_get_report_size() computes the size from drv_data->num_*_electrodes when those are set, i.e. from the F55 function's electrode counts. Both counts come straight from device queries (F54 and F55 each report up to 255 electrodes) and nothing constrains the F55 counts to the F54 ones. A malicious or malfunctioning RMI4 device that reports larger F55 electrode counts than its F54 counts makes report_size exceed the allocation, so the read loop writes past report_data (and the V4L2 dequeue memcpy() then reads past it). On conforming hardware the F55 configured electrodes are a subset of the F54 physical electrodes, so report_size never exceeds the buffer and well-behaved devices are unaffected. Record the allocation size and reject a report that does not fit, mirroring the existing zero-size check. | ||||
| CVE-2026-80568 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - block s_input when F54 queue is busy Changing the input (diagnostic report type) mid-stream changes the report size. Since V4L2 buffers are allocated based on the size at stream start, changing the input while streaming could lead to a heap buffer overflow if the new size is larger than the allocated buffers. Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue is busy (streaming). | ||||
| CVE-2026-80565 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qce - fix error path in devm_qce_register_algs If ops->register_algs() fails, the error path repeatedly calls the same ops->unregister_algs() from the failed registration. Use the loop index to unregister the previously registered algorithms instead. | ||||
| CVE-2026-80561 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix multiple unsafe decodes in decode_locker() decode_locker() in cls_lock_client.c contains three unsafe decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_copy() at the locker_id_t name field has no preceding bounds check. With p == end after ceph_start_decoding() accepts struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past the validated buffer boundary. 2. *p += sizeof(struct ceph_timespec) after the locker_info_t header is an unchecked pointer advance. A malicious OSD can position p past end, causing all subsequent _safe checks to pass against a bogus boundary. 3. len = ceph_decode_32(p) has no preceding bounds check, and the immediately following *p += len is uncapped. A malicious OSD can send len=0xffffffff, advancing p gigabytes past end and escaping the decode window entirely. Fix all three by replacing bare operations with their safe variants: ceph_decode_copy -> ceph_decode_copy_safe *p += sizeof(...) -> ceph_decode_skip_n ceph_decode_32(p) -> ceph_decode_32_safe *p += len -> ceph_decode_skip_n A new label is added to return -EINVAL on any bounds violation. -EINVAL is appropriate here: the data received from the OSD is structurally malformed, which is an invalid argument to the decode contract regardless of whether the caller or the wire is at fault. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition) without any further privileges beyond OSD session establishment. [ idryomov: use ceph_decode_skip_string() to skip description, trim changelog ] | ||||
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-80559 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: sur40 - fix input device registration ordering In sur40_probe(), input_register_device() was previously called early before the V4L2 video device and vb2_queue components were fully initialized. If userspace opened the input device immediately upon registration, sur40_open() would trigger and start the sur40_poll() worker thread. This worker thread invokes sur40_process_video() and accesses the uninitialized vb2_queue structure, leading to a data race and potential system crash. Furthermore, if V4L2 or video registration failed after input_register_device() succeeded, the error path fell through to calling input_free_device() on a successfully registered device instead of input_unregister_device(), corrupting input core state. Move input_register_device() to the very end of sur40_probe(). This ensures the V4L2 and video queue structures are fully initialized before polling can start, and naturally resolves the error path bug since input_free_device() is now only called when input registration has not yet occurred. To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move input_unregister_device() to the very beginning of sur40_disconnect(). This guarantees that the input polling worker thread is stopped before V4L2 video components or control handlers are unregistered. | ||||
| CVE-2026-80558 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ] | ||||
| CVE-2026-80557 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix OOB read in decode_watchers() via missing bounds check ceph_start_decoding() validates that struct_len bytes remain in the buffer after the encoding header, but accepts struct_len=0 as valid: ceph_decode_need(p, end, 0, bad) always passes. When a malicious or compromised OSD sends an obj_list_watch_response_t reply with struct_len=0, ceph_start_decoding() returns success with p == end, leaving zero bytes guaranteed for subsequent reads. The immediately following ceph_decode_32(p) in decode_watchers() has no preceding bounds check. With p == end this is a 4-byte read past the validated buffer boundary. The garbage value is then passed directly to kzalloc_objs() as the watcher count. The sibling function decode_watcher() already uses the safe variants (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32) after its own ceph_start_decoding() call. decode_watchers() is the only site that uses the bare variant, confirming an oversight. Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end, *num_watchers, bad), consistent with the established pattern. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment (e.g. cloud) can trigger this against any kernel client that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges beyond OSD session establishment. [ idryomov: trim changelog ] | ||||
| CVE-2026-80555 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Free all memory if cp_init() fails The routine cp_free() is called to unpin/free any memory once an I/O is completed successfully, or if cp_prefetch() fails. But if cp_init() fails, and cp->initialized is not enabled, the same routine cannot be used to free all the memory. An attempt to address this exists in ccwchain_handle_ccw(), where a single call to ccwchain_free() is made for the currently-processed CCW segment. But this will leak other segments (created as a result of a Transfer in Channel) that had been allocated as part of the same channel program. Address this by performing the cleanup outside of the recursive ccwchain_handle_ccw()/ccwchain_loop_tic() logic. | ||||
| CVE-2026-80551 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure first IDAW remains constant The first IDAW in a list does not need to be on a 2K/4K boundary like all others, and so is read separately to accurately calculate the size of the buffer needed to read the full IDAL. Verify that the address found in the first IDAW is unchanged between reads, to ensure a consistent set of IDAWs being worked with. | ||||
| CVE-2026-80550 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Fix out of bounds check on CCW array The routine ccwchain_calc_length() counts the number of channel command words (CCWs) that are chained together in a single channel program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs. The loop itself is "do..while (count < 257)", and while the logic in is_cpa_within_range() correctly adjusts between the 0-index array of CCWs and the count of CCWs starting at 1, this means it would look at a possible 257th CCW before ending the loop and (correctly) returning an error. Fix this by restructuring the loop to break as soon as 256 CCWs (thus indexes 0-255) are examined, without looking at memory outside the range. | ||||
| CVE-2026-80548 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Selectively expand io_mutex The io_mutex was defined to serialize the io_regions, but then has also sort of been associated with the I/O themselves because of the close relationship they share. With the handful of races that are possible, the choices are either to: A) expand the scope of io_mutex to close these remaining windows, or B) reduce the scope of io_mutex to just io_region, and introduce a new lock mechanism for the remaining I/O resources This patch implements A, since B brings with it a lot more interactions that would need to be tracked and kept in a correct hierarchy. It also takes advantage of the workqueue element for cp_free() that now gets called out of fsm_notoper(), which could be invoked out of an interrupt context and thus cannot acquire a mutex itself. | ||||
| CVE-2026-80545 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB length and overflow checks The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Missing minimum size validation: The ep11_cprb structure and subsequent payload fields (pld_tag, pld_lenfmt) are copied from userspace without verifying sufficient buffer length. 2. Arithmetic overflow in length calculations: CEIL4 alignment could overflow, bypassing size checks and enabling buffer overflows. 3. The payload is asn1 encoded but the function just uses a simple c struct overlay to access some fields of the payload. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, and validating minimum request size and minimum reply size before copying from userspace. Do a very simple asn1 parsing of the payload up to the function value field. | ||||
| CVE-2026-80544 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct overlays to access and modify the domain field in the EP11 CPRB payload, creating maintainability and security concerns: 1. Struct overlay approach (pld_hdr) assumes fixed payload structure and doesn't validate the actual ASN.1 encoding. 2. Complex length format detection logic is error-prone and doesn't properly validate bounds at each parsing step. 3. Direct struct member access bypasses proper ASN.1 validation. Fix by replacing struct overlays with explicit ASN.1 parsing that validates each field (payload tag/length, function tag/length/value, optional domain tag/length/value) with proper bounds checking at every step. Add asn1_int_encode() helper function to safely write integer values with correct endianness conversion. This makes the code consistent with the validation pattern introduced with the rework of the xcrb_msg_to_type6_ep11cprb_msgx() function. | ||||
| CVE-2026-80541 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate GEM_CREATE domain combinations AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK, but did not validate domain combinations. Userspace could combine CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and hit BUG_ON(). Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/ VRAM domains to be specified one at a time. Return -EINVAL for invalid combinations in amdgpu_gem_create_ioctl(). v2: Rename helper from amdgpu_gem_domain_valid() to amdgpu_gem_are_domains_valid() (Christian) (cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) | ||||
| CVE-2026-80540 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix UVD decode image min size calculation This needs to use pitch instead of width. Also reject pitch over 4096 to avoid overflow. (cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) | ||||
| CVE-2026-80538 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: propagate errors from xfs_rtginode_load xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than -ENOENT as success. This can leave the realtime group inode unset after an I/O, allocation, or corruption error. Growfs then continues as though the inode had been loaded. Only -ENOENT means that the inode needs to be created. Return all other errors to the growfs caller. | ||||
| CVE-2026-80537 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-80536 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: bounds-check buffer log item's dirty bitmap xlog_recover_do_reg_buffer() replays each dirty region described by a buffer log item's bitmap into the buffer read for that item: memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT), item->ri_buf[i].iov_base, nbits << XFS_BLF_SHIFT); The destination offset (bit/nbits, from the logged dirty bitmap) and the buffer size (from the logged blf_len) are both attacker-controlled and otherwise unrelated, yet the only thing bounding the copy is an ASSERT(), which compiles away on production kernels. A crafted image logging a small blf_len together with a bitmap bit past the end of that buffer drives the memcpy() past the buffer's allocation, corrupting adjacent kernel heap during mount-time log recovery. This is reachable by anyone who can get a crafted image mounted -- the malicious-filesystem threat model XFS already guards against elsewhere. Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail idiom already used in xlog_recover_do_inode_buffer() and xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes STATIC int and its three callers propagate the error. Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted image trips a slab-out-of-bounds write before this change and fails recovery cleanly with -EFSCORRUPTED after it. | ||||
| CVE-2026-80531 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid UAF on sc->tempip in xrep_tempfile_create LOLLM noticed a potential UAF if the tempfile creation code fails after it set sc->tempip. Fix that. | ||||