Export limit exceeded: 363161 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 363161 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (363161 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-55597 | 1 Imagemagick | 1 Imagemagick | 2026-07-02 | 5.5 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-26, an incorrect handling of arguments can cause a heap buffer over-write in the JP2 encoder. This issue has been fixed in version7.1.2-26. | ||||
| CVE-2026-53333 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path. | ||||
| CVE-2026-53343 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in __switch_to(). The read uses ldr, but the KASAN shadow address is byte-granular and is not guaranteed to be word aligned. ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to() with an alignment exception before reaching init. Use ldrb for the dummy shadow access. The code only needs to fault in the shadow mapping if the stack shadow is missing, so a byte load is sufficient and matches the granularity of KASAN shadow memory. | ||||
| CVE-2026-53347 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix driver removal with disabled KMS DRM atomic and modesetting aren't initialized if virtio-gpu driver built with disabled KMS, leading to access of uninitialized data on driver removal/unbinding and crashing kernel. Fix it by skipping shutting down atomic core with unavailable KMS. | ||||
| CVE-2026-54262 | 1 Wagtail | 1 Wagtail | 2026-07-02 | 4.3 Medium |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, a low-level user with the "Can submit translation" permission can create translations for any page, including those they do not have permissions for. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. | ||||
| CVE-2026-53331 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | ||||
| CVE-2026-50160 | 1 Hoppscotch | 1 Hoppscotch | 2026-07-02 | 10 Critical |
| Hoppscotch is an API development ecosystem. In self-hosted deployments of hoppscotch-backend from version 2026.4.1 and earlier, the unauthenticated POST /v1/onboarding/config endpoint is vulnerable to mass assignment. The global NestJS ValidationPipe is configured without whitelist: true, so extra properties on the request body that are not declared in SaveOnboardingConfigRequest are not stripped and are iterated in the service layer as if they were legitimate InfraConfig entries. Because keys such as JWT_SECRET and SESSION_SECRET are valid InfraConfigEnum values and are not explicitly rejected during validation, an unauthenticated attacker who can reach a fresh instance before onboarding completes (or when no users exist) can overwrite these values in the database. Overwriting JWT_SECRET gives the attacker control of the JWT signing key, allowing them to forge tokens for any user, including administrators, and results in full server compromise. The issue is fixed in hoppscotch 2026.5.0. | ||||
| CVE-2026-53351 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI Fixes a warning while dumping core: [54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 | ||||
| CVE-2026-54263 | 1 Wagtail | 1 Wagtail | 2026-07-02 | 7.3 High |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, reflected cross-site scripting (XSS) vulnerability exists on the dynamic image URL generator view within the Wagtail admin interface. A user with a limited-permission editor account for the Wagtail admin could craft a URL that, when viewed by a user with higher privileges, could perform actions with that user's credentials. The vulnerability is present for all sites, even if they do not enable the dynamic image serve view. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. | ||||
| CVE-2026-57276 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in password field (key present) | ||||
| CVE-2026-57272 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### byPass command index-out-of-bound | ||||
| CVE-2026-57267 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### snapshot command index-out-of-bound | ||||
| CVE-2026-57266 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### 2wayAudio command index-out-of-bound | ||||
| CVE-2026-57265 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### audio command index-out-of-bound | ||||
| CVE-2026-57962 | 1 Mozilla | 1 Thunderbird | 2026-07-02 | 5.3 Medium |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. | ||||
| CVE-2026-53328 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-53354 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. | ||||
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | ||||
| CVE-2026-58037 | 1 Wikimedia | 1 Mediawiki | 2026-07-02 | N/A |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation MediaWiki. This vulnerability is associated with program files includes/Language/Language.Php, includes/Logging/BlockLogFormatter.Php, includes/Logging/LogFormatter.Php, includes/Logging/PatrolLogFormatter.Php, includes/Logging/RenameuserLogFormatter.Php, includes/Logging/TagLogFormatter.Php, includes/Specials/SpecialVersion.Php. This issue affects MediaWiki: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9. | ||||