Export limit exceeded: 46531 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46531 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52909 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: set netns_immutable on the fallback device. john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace. | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-46140 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: validate WMT event SKB length before struct access btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them. | ||||
| CVE-2026-46135 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix race between ICReq handling and queue teardown nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||
| CVE-2026-23204 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221 | ||||
| CVE-2026-20213 | 1 Cisco | 1 Secure Endpoint | 2026-07-03 | 7.5 High |
| A vulnerability in the PE file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PE files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PE content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20217 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the PESpin file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PESpin files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PESpin content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20215 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the 7z file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in 7z files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains 7z content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20243 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the ALZ file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in ALZ files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains ALZ content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-57272 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-03 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### byPass command index-out-of-bound | ||||
| CVE-2026-20244 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the DMG file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in DMG files during scanning, which may result in an integer overflow on 32-bit platforms only. An attacker could exploit this vulnerability by submitting a crafted file that contains DMG content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-57266 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-03 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### 2wayAudio command index-out-of-bound | ||||
| CVE-2026-9673 | 1 Mrodrig | 1 Json-2-csv | 2026-07-03 | 6.8 Medium |
| Versions of the package json-2-csv from 3.15.0 and before 5.5.11 are vulnerable to CSV Injection via the preventCsvInjection option which can be bypassed. An attacker can inject formulas into CSV files, which execute when the files are opened in spreadsheet applications. | ||||
| CVE-2026-56210 | 2 Aomedia, Redhat | 7 Libaom, Ai Inference Server, Enterprise Linux and 4 more | 2026-07-03 | 7.1 High |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). | ||||
| CVE-2026-56208 | 2 Aomedia, Redhat | 7 Libaom, Ai Inference Server, Enterprise Linux and 4 more | 2026-07-03 | 7.6 High |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. | ||||
| CVE-2026-57265 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-03 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### audio command index-out-of-bound | ||||
| CVE-2025-40910 | 2026-07-03 | 6.5 Medium | ||
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses. Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. | ||||
| CVE-2026-20214 | 2026-07-03 | 7.5 High | ||
| A vulnerability in the FSG file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in FSG files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains portable executable content compressed with FSG to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-55952 | 1 Erlang | 3 Erlang/otp, Erlang\/otp, Otp | 2026-07-03 | 7.5 High |
| The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process. An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected. This issue affects OTP from 22.2 before 29.0.3, 28.5.0.3 and 27.3.4.14 corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10. | ||||