Export limit exceeded: 26069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74389 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix log flood after cmd_mbox failure hns_roce_cmd_mbox() is the command interface between driver and hardware. When hardware is abnormal, the unlimited error printings after hns_roce_cmd_mbox() failure will cause log flood and even system crash. Replace ibdev_err() and ibdev_warn() with their ratelimited versions in the error handling path after hns_roce_cmd_mbox() (and its wrappers hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74386 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix page fragment cache leak in error path In nvmet_tcp_alloc_queue(), when a connection is closed during the allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN), the error handling jumps to out_destroy_sq and then to out_ida_remove without draining the page fragment cache. Although nvmet_tcp_free_cmd() is called in some error paths to release individual page fragments, the underlying page cache reference held by queue->pf_cache is never released. The first allocation using pf_cache is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens after ida_alloc() returns successfully. This results in a page leak each time a connection fails during allocation, which could lead to memory exhaustion over time if connections are repeatedly opened and closed. Fix this by calling page_frag_cache_drain() before freeing the queue structure in the out_ida_remove label. | ||||
| CVE-2026-74356 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix vhost_get_avail_idx for a non empty ring vhost_get_avail_idx is supposed to report whether it has updated vq->avail_idx. Instead, it returns whether all entries have been consumed, which is usually the same. But not always - in drivers/vhost/net.c and when mergeable buffers have been enabled, the driver checks whether the combined entries are big enough to store an incoming packet. If not, the driver re-enables notifications with available entries still in the ring. The incorrect return value from vhost_get_avail_idx propagates through vhost_enable_notify and causes the host to livelock if the guest is not making progress, as vhost will immediately disable notifications and retry using the available entries. This goes back to commit d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()") which changed vhost_enable_notify() to compare the freshly read avail index against vq->last_avail_idx instead of the previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move smp_rmb() into vhost_get_avail_idx()") then carried over the same comparison when refactoring vhost_enable_notify() to call the unified vhost_get_avail_idx(). The obvious fix is to make vhost_get_avail_idx do what the comment says it does and report whether new entries have been added. | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74345 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | ||||
| CVE-2026-74341 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | ||||
| CVE-2026-74339 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74318 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock cloning inline extent when using flushoncommit In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000 ---truncated--- | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74308 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix kernel BUG in ext4_write_inline_data_end When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-74302 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74278 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix kernel heap address leak in bounce_error_event() The comment above bounce_error_event() documents that user clients should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded as variable-length data, while kernel clients should receive SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer. However, the implementation unconditionally uses SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw struct snd_seq_event pointer for all clients. When a bounce error event is delivered to a USER_CLIENT via snd_seq_read(), the kernel heap address in data.quote.event is exposed to userspace through copy_to_user() in the fixed-length branch. This is a distinct leak path from the one addressed by commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"), which sanitizes data.ext.ptr in the variable-length branch of snd_seq_read(). The bounce_error_event() leak uses fixed-length events that take the else branch where no sanitization occurs. Differentiate the bounce event by client type. For USER_CLIENT, send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE and data.ext pointing to the original event. The variable-length path in snd_seq_event_dup() copies the event data into chained cells, and snd_seq_expand_var_event() copies only the content -- never the pointer -- to userspace. For KERNEL_CLIENT, keep the existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted pointer. | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-74264 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | ||||
| CVE-2026-74261 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: avoid stale FIFO cells during resize snd_seq_fifo_resize() still needs to publish the replacement pool before it waits for FIFO users. A blocking snd_seq_read() holds f->use_lock while it sleeps, so concurrent senders must be able to queue to the new pool and wake that reader instead of failing against a closing old pool. However, snd_seq_fifo_event_in() duplicates an event before it takes f->lock, and snd_seq_read() can dequeue a cell and later call snd_seq_fifo_cell_putback() if copy_to_user() or snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches oldhead in between, either path can relink an old-pool cell after the snapshot. That stale cell sits outside the drained oldhead list, keeps oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting for the retired pool to drain. Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(), but reject stale cells before any FIFO relink. Revalidate event-in cells under f->lock and retry them against the published replacement pool, and free stale putback cells instead of linking them back into the FIFO. The buggy scenario involves two paths, with each column showing the order within that path: resize path: relink path: 1. Allocate newpool. 1. Take f->use_lock. 2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool detach oldhead. cell before oldpool closes. 3. Mark oldpool closing and 3. Reach a later relink point after wait for FIFO users. resize published newpool. 4. Free oldhead and delete 4. Relink the old-pool cell after oldpool. resize detached oldhead. 5. Drop f->use_lock. The reproducer reports a resize ioctl blocked in the expected pool teardown path: signal: resize iteration=98 target_pool=4 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=651 wchan=snd_seq_pool_done diagnostic: resize_tid=651 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f A second run with larger pools hit the same target path: signal: resize iteration=32 target_pool=64 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=663 wchan=snd_seq_pool_done diagnostic: resize_tid=663 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||