Export limit exceeded: 363023 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (363023 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-50195 | 1 Containerd | 1 Containerd | 2026-07-02 | N/A |
| containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a vulnerability in the CRI checkpoint import process where it fails to validate the image references specified within a checkpoint image's configuration. An attacker with permissions to create pods can use a crafted checkpoint image to force containerd to pull a malicious image and assign it an arbitrary local tag, thereby poisoning the node's local image cache. Subsequently, if other pods on the same node attempt to use the poisoned tag with an IfNotPresent (or Never) pull policy, they will unknowingly execute the attacker's malicious image instead of the legitimate one. This can lead to a compromise of the affected pods, allowing the attacker to execute arbitrary code under the victim pod's identity. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. | ||||
| CVE-2026-53331 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | ||||
| CVE-2026-55153 | 1 Swaldman | 1 Mchange-commons-java | 2026-07-02 | 7.1 High |
| mchange-commons-java is a Java library of shared utility classes used by mchange projects like the c3p0 connection pool. Prior to version 0.6.0, its JNDI ObjectFactory implementation (com.mchange.v2.naming.JavaBeanObjectFactory) will construct objects of arbitrary classes and initialize "JavaBean"-style properties, which for certain classes enables JNDI injection and "deserialization gadgets." Such initialization is unsafe for some classes: for example, setting the contentType property of a Swing JEditorPane to text/html and its text property to HTML containing a stylesheet <link> will provoke an HTTP GET on an arbitrary URL, potentially from within a trusted security domain. The problem is aggravated by the library's ReferenceIndirector, through which malicious JNDI Reference objects can be smuggled in for dereferencing wherever an application reads a Java-serialized object. This has been resolved in version 0.6.0. | ||||
| CVE-2026-50160 | 1 Hoppscotch | 1 Hoppscotch | 2026-07-02 | 10 Critical |
| Hoppscotch is an API development ecosystem. In self-hosted deployments of hoppscotch-backend from version 2026.4.1 and earlier, the unauthenticated POST /v1/onboarding/config endpoint is vulnerable to mass assignment. The global NestJS ValidationPipe is configured without whitelist: true, so extra properties on the request body that are not declared in SaveOnboardingConfigRequest are not stripped and are iterated in the service layer as if they were legitimate InfraConfig entries. Because keys such as JWT_SECRET and SESSION_SECRET are valid InfraConfigEnum values and are not explicitly rejected during validation, an unauthenticated attacker who can reach a fresh instance before onboarding completes (or when no users exist) can overwrite these values in the database. Overwriting JWT_SECRET gives the attacker control of the JWT signing key, allowing them to forge tokens for any user, including administrators, and results in full server compromise. The issue is fixed in hoppscotch 2026.5.0. | ||||
| CVE-2026-53351 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI Fixes a warning while dumping core: [54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 | ||||
| CVE-2026-47262 | 1 Containerd | 1 Containerd | 2026-07-02 | N/A |
| containerd is an open-source container runtime. Versions prior to 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2, contain a vulnerability that allows a maliciously crafted image to cause a Denial of Service (DoS) condition. When creating a container from this image, memory exhaustion occurs, leading to an Out Of Memory (OOM) kill of the containerd process. This renders the container runtime API unavailable and can disrupt clients such as the Docker Engine or Kubernetes control-plane components. This issue has been fixed in versions 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2. | ||||
| CVE-2026-54263 | 1 Wagtail | 1 Wagtail | 2026-07-02 | 7.3 High |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, reflected cross-site scripting (XSS) vulnerability exists on the dynamic image URL generator view within the Wagtail admin interface. A user with a limited-permission editor account for the Wagtail admin could craft a URL that, when viewed by a user with higher privileges, could perform actions with that user's credentials. The vulnerability is present for all sites, even if they do not enable the dynamic image serve view. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. | ||||
| CVE-2026-54704 | 1 Opentelemetry | 1 Opentelemetry-java-instrumentation | 2026-07-02 | 6.5 Medium |
| OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.28.0, the JDBC auto-instrumentation may fail to sanitize passwords in SQL CONNECT statements when the password is double-quoted. As a result, clear-text database passwords can be added to trace span attributes and exported to observability backends. This issue has been fixed in version 2.28.0. | ||||
| CVE-2026-57276 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in password field (key present) | ||||
| CVE-2026-57272 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### byPass command index-out-of-bound | ||||
| CVE-2026-57267 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### snapshot command index-out-of-bound | ||||
| CVE-2026-57266 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### 2wayAudio command index-out-of-bound | ||||
| CVE-2026-57265 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### audio command index-out-of-bound | ||||
| CVE-2026-13981 | 1 Google | 1 Chrome | 2026-07-02 | 4.3 Medium |
| Inappropriate implementation in Chrome for iOS in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-57962 | 1 Mozilla | 1 Thunderbird | 2026-07-02 | 5.3 Medium |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. | ||||
| CVE-2026-53328 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-53354 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. | ||||
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | ||||
| CVE-2026-52198 | 2026-07-02 | 7.5 High | ||
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_425994 component | ||||