Export limit exceeded: 363381 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (363381 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-14626 | 1 Nousresearch | 1 Hermes-agent | 2026-07-04 | 4.3 Medium |
| A weakness has been identified in NousResearch hermes-agent up to 2026.4.30. The impacted element is the function AIAgent.run_conversation of the file run_agent.py of the component HTTP API. This manipulation of the argument todos causes denial of service. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-13816 | 1 Google | 1 Chrome | 2026-07-04 | 6.5 Medium |
| Insufficient validation of untrusted input in File Input in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-53341 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh() may_decode_fh() accesses mount::mnt_ns without holding any locks; that means the mount can concurrently be unmounted, and the mnt_namespace can concurrently be freed after an RCU grace period. This race can happens as follows, assuming that the mount point was created by open_tree(..., OPEN_TREE_CLONE): thread 1 thread 2 RCU __do_sys_open_by_handle_at do_handle_open handle_to_path may_decode_fh is_mounted [mount::mnt_ns access] [mount::mnt_ns access] __do_sys_close fput_close_sync __fput dissolve_on_fput umount_tree class_namespace_excl_destructor namespace_unlock free_mnt_ns mnt_ns_tree_remove call_rcu(mnt_ns_release_rcu) mnt_ns_release_rcu mnt_ns_release kfree [mnt_namespace::user_ns access] **UAF** Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like in __prepend_path(). Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE() for writers that can race with lockless readers. This bug is unreachable unless one of the following is set: - CONFIG_PREEMPTION - CONFIG_RCU_STRICT_GRACE_PERIOD because it requires an RCU grace period to happen during a syscall without an explicit preemption. This doesn't seem to have interesting security impact; worst-case, it could leak the result of an integer comparison to userspace (from the level check in cap_capable()), cause an endless loop, or crash the kernel by dereferencing an invalid address. | ||||
| CVE-2026-53332 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. | ||||
| CVE-2026-53329 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) | ||||
| CVE-2026-53327 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugobjects: Do not fill_pool() if pi_blocked_on On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which asserts if current::pi_blocked_on is set, because a task can obviously only block on one lock as otherwise the priority inheritenace chain gets corrupted. Prevent this by expanding the conditional to take current::pi_blocked_on into account. | ||||
| CVE-2026-53326 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't call fill_pool() in early boot hardirq context When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was reported to the console. During early boot, interrupts are enabled before the scheduler is enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can fire and in the hard interrupt context handler attempt to fill the pool This can lead to a deadlock when the interrupt occurred when the interrupt hits a region which holds a lock that is required to be taken in the allocation path. Add a new can_fill_pool() helper and reorder the exception rule and forbid this scenario by excluding allocations from hard interrupt context. | ||||
| CVE-2026-53325 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. | ||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-53177 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. | ||||
| CVE-2026-53167 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1. | ||||
| CVE-2026-53163 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to account for try_to_take_rt_mutex(). | ||||
| CVE-2026-53159 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix DMA address corruption due to find_vma misuse fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. | ||||
| CVE-2026-53158 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. | ||||
| CVE-2026-53157 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phonet: free phonet_device after RCU grace period phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type. | ||||
| CVE-2026-53151 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the ACK parser to extract the SACK table for parsing Fix modification of the received skbuff in rxrpc_input_soft_acks() and a potential incorrect access of the buffer in a fragmented UDP packet (the packet would probably have to be deliberately pre-generated as fragmented) when AF_RXRPC tries to extract the contents of the SACK table by copying out the contents of the SACK table into a buffer before attempting to parse AF_RXRPC assumes that it can just call skb_condense() and then validly access the SACK table from skb->data and that it will be a flat buffer - but skb_condense() can silently fail to do anything under some circumstances. Note that whilst rxrpc_input_soft_acks() should be able to parse extended ACKs, the rest of AF_RXRPC doesn't currently support that. Further, there's then no need to call skb_condense() in rxrpc_input_ack(), so don't. | ||||
| CVE-2026-53142 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/display: fix oops in suspend/shutdown without display The xe driver keeps track of whether to probe display, and whether display hardware is there, using xe->info.probe_display. It gets set to false if there's no display after intel_display_device_probe(). However, the display may also be disabled via fuses, detected at a later time in intel_display_device_info_runtime_init(). In this case, the xe driver does for_each_intel_crtc() on uninitialized mode config in xe_display_flush_cleanup_work(), leading to a NULL pointer dereference, and generally calls display code with display info cleared. Check for intel_display_device_present() after intel_display_device_info_runtime_init(), and reset xe->info.probe_display as necessary. Also do unset_display_features() for completeness, although display runtime init has already done that. This will need to be unified across all cases later. Move intel_display_device_info_runtime_init() call slightly earlier, similar to i915, to avoid a bunch of unnecessary setup for no display cases. Note #1: The xe driver has no business doing low level display plumbing like for_each_intel_crtc() to begin with. It all needs to happen in display code. Note #2: The actual bug is present already in commit 44e694958b95 ("drm/xe/display: Implement display support"), but the oops was likely introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display suspend/resume work on discrete"). (cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) | ||||
| CVE-2026-53139 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Skip CSD when it has zeroed workgroups A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2 registers. Kicking off a dispatch with a zero count in any of the three dimensions is invalid. First, the hardware will process 0 as 65536, while the user-space driver exposes a maximum of 65535. Over that, a submission with a zeroed workgroup dimension should be a no-op. These zeroed counts can reach the dispatch path through an indirect CSD job, whose workgroup counts are only known once the indirect buffer is read and may legitimately be zero, but such scenario should only result in a no-op. Overwrite the indirect CSD job workgroup counts with the indirect BO ones, even if they are zeroed, and don't submit the job to the hardware when any of the workgroup counts is zero, so the job completes immediately instead of running the shader. | ||||
| CVE-2026-53138 | 1 Linux | 1 Linux Kernel | 2026-07-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) | ||||
| CVE-2026-53101 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||