Export limit exceeded: 109285 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (109285 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68360 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. | ||||
| CVE-2025-68353 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: vxlan: prevent NULL deref in vxlan_xmit_one Neither sock4 nor sock6 pointers are guaranteed to be non-NULL in vxlan_xmit_one, e.g. if the iface is brought down. This can lead to the following NULL dereference: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:vxlan_xmit_one+0xbb3/0x1580 Call Trace: vxlan_xmit+0x429/0x610 dev_hard_start_xmit+0x55/0xa0 __dev_queue_xmit+0x6d0/0x7f0 ip_finish_output2+0x24b/0x590 ip_output+0x63/0x110 Mentioned commits changed the code path in vxlan_xmit_one and as a side effect the sock4/6 pointer validity checks in vxlan(6)_get_route were lost. Fix this by adding back checks. Since both commits being fixed were released in the same version (v6.7) and are strongly related, bundle the fixes in a single commit. | ||||
| CVE-2025-68175 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix streaming cleanup on release The current implementation unconditionally calls mxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This can lead to situations where any release call (like from a simple "v4l2-ctl -l") may release a currently streaming queue when called on such a device. This is reproducible on an i.MX8MP board by streaming from an ISI capture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesink While this stream is running, querying the caps of the same device provokes the error state: v4l2-ctl -l -d /dev/videoX This results in the following trace: [ 155.452152] ------------[ cut here ]------------ [ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6 [ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT [ 157.064369] Hardware name: imx8mp_board_01 (DT) [ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi] [ 157.087126] sp : ffff800080003ee0 [ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000 [ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50 [ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000 [ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000 [ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000 [ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38 [ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000 [ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000 [ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200 [ 157.161850] Call trace: [ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P) [ 157.170319] __handle_irq_event_percpu+0x58/0x218 [ 157.175029] handle_irq_event+0x54/0xb8 [ 157.178867] handle_fasteoi_irq+0xac/0x248 [ 157.182968] handle_irq_desc+0x48/0x68 [ 157.186723] generic_handle_domain_irq+0x24/0x38 [ 157.191346] gic_handle_irq+0x54/0x120 [ 157.195098] call_on_irq_stack+0x24/0x30 [ 157.199027] do_interrupt_handler+0x88/0x98 [ 157.203212] el0_interrupt+0x44/0xc0 [ 157.206792] __el0_irq_handler_common+0x18/0x28 [ 157.211328] el0t_64_irq_handler+0x10/0x20 [ 157.215429] el0t_64_irq+0x198/0x1a0 [ 157.219009] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the vb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal of the manual cleanup from mxc_isi_video_release(). | ||||
| CVE-2025-68174 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: enhance kfd process check in switch partition current switch partition only check if kfd_processes_table is empty. kfd_prcesses_table entry is deleted in kfd_process_notifier_release, but kfd_process tear down is in kfd_process_wq_release. consider two processes: Process A (workqueue) -> kfd_process_wq_release -> Access kfd_node member Process B switch partition -> amdgpu_xcp_pre_partition_switch -> amdgpu_amdkfd_device_fini_sw -> kfd_node tear down. Process A and B may trigger a race as shown in dmesg log. This patch is to resolve the race by adding an atomic kfd_process counter kfd_processes_count, it increment as create kfd process, decrement as finish kfd_process_wq_release. v2: Put kfd_processes_count per kfd_dev, move decrement to kfd_process_destroy_pdds and bug fix. (Philip Yang) [3966658.307702] divide error: 0000 [#1] SMP NOPTI [3966658.350818] i10nm_edac [3966658.356318] CPU: 124 PID: 38435 Comm: kworker/124:0 Kdump: loaded Tainted [3966658.356890] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [3966658.362839] nfit [3966658.366457] RIP: 0010:kfd_get_num_sdma_engines+0x17/0x40 [amdgpu] [3966658.366460] Code: 00 00 e9 ac 81 02 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 48 8b 4f 08 48 8b b7 00 01 00 00 8b 81 58 26 03 00 99 <f7> be b8 01 00 00 80 b9 70 2e 00 00 00 74 0b 83 f8 02 ba 02 00 00 [3966658.380967] x86_pkg_temp_thermal [3966658.391529] RSP: 0018:ffffc900a0edfdd8 EFLAGS: 00010246 [3966658.391531] RAX: 0000000000000008 RBX: ffff8974e593b800 RCX: ffff888645900000 [3966658.391531] RDX: 0000000000000000 RSI: ffff888129154400 RDI: ffff888129151c00 [3966658.391532] RBP: ffff8883ad79d400 R08: 0000000000000000 R09: ffff8890d2750af4 [3966658.391532] R10: 0000000000000018 R11: 0000000000000018 R12: 0000000000000000 [3966658.391533] R13: ffff8883ad79d400 R14: ffffe87ff662ba00 R15: ffff8974e593b800 [3966658.391533] FS: 0000000000000000(0000) GS:ffff88fe7f600000(0000) knlGS:0000000000000000 [3966658.391534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3966658.391534] CR2: 0000000000d71000 CR3: 000000dd0e970004 CR4: 0000000002770ee0 [3966658.391535] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3966658.391535] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [3966658.391536] PKRU: 55555554 [3966658.391536] Call Trace: [3966658.391674] deallocate_sdma_queue+0x38/0xa0 [amdgpu] [3966658.391762] process_termination_cpsch+0x1ed/0x480 [amdgpu] [3966658.399754] intel_powerclamp [3966658.402831] kfd_process_dequeue_from_all_devices+0x5b/0xc0 [amdgpu] [3966658.402908] kfd_process_wq_release+0x1a/0x1a0 [amdgpu] [3966658.410516] coretemp [3966658.434016] process_one_work+0x1ad/0x380 [3966658.434021] worker_thread+0x49/0x310 [3966658.438963] kvm_intel [3966658.446041] ? process_one_work+0x380/0x380 [3966658.446045] kthread+0x118/0x140 [3966658.446047] ? __kthread_bind_mask+0x60/0x60 [3966658.446050] ret_from_fork+0x1f/0x30 [3966658.446053] Modules linked in: kpatch_20765354(OEK) [3966658.455310] kvm [3966658.464534] mptcp_diag xsk_diag raw_diag unix_diag af_packet_diag netlink_diag udp_diag act_pedit act_mirred act_vlan cls_flower kpatch_21951273(OEK) kpatch_18424469(OEK) kpatch_19749756(OEK) [3966658.473462] idxd_mdev [3966658.482306] kpatch_17971294(OEK) sch_ingress xt_conntrack amdgpu(OE) amdxcp(OE) amddrm_buddy(OE) amd_sched(OE) amdttm(OE) amdkcl(OE) intel_ifs iptable_mangle tcm_loop target_core_pscsi tcp_diag target_core_file inet_diag target_core_iblock target_core_user target_core_mod coldpgs kpatch_18383292(OEK) ip6table_nat ip6table_filter ip6_tables ip_set_hash_ipportip ip_set_hash_ipportnet ip_set_hash_ipport ip_set_bitmap_port xt_comment iptable_nat nf_nat iptable_filter ip_tables ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sn_core_odd(OE) i40e overlay binfmt_misc tun bonding(OE) aisqos(OE) aisqo ---truncated--- | ||||
| CVE-2025-40213 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_complete There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to memcpy from badly declared on-stack flexible array. Another crash is in set_mesh_complete() due to double list_del via mgmt_pending_valid + mgmt_pending_remove. Use DEFINE_FLEX to declare the flexible array right, and don't memcpy outside bounds. As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free, and also report status on error. | ||||
| CVE-2025-40130 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix data race in CPU latency PM QoS request handling The cpu_latency_qos_add/remove/update_request interfaces lack internal synchronization by design, requiring the caller to ensure thread safety. The current implementation relies on the 'pm_qos_enabled' flag, which is insufficient to prevent concurrent access and cannot serve as a proper synchronization mechanism. This has led to data races and list corruption issues. A typical race condition call trace is: [Thread A] ufshcd_pm_qos_exit() --> cpu_latency_qos_remove_request() --> cpu_latency_qos_apply(); --> pm_qos_update_target() --> plist_del <--(1) delete plist node --> memset(req, 0, sizeof(*req)); --> hba->pm_qos_enabled = false; [Thread B] ufshcd_devfreq_target --> ufshcd_devfreq_scale --> ufshcd_scale_clks --> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true --> cpu_latency_qos_update_request --> pm_qos_update_target --> plist_del <--(3) plist node use-after-free Introduces a dedicated mutex to serialize PM QoS operations, preventing data races and ensuring safe access to PM QoS resources, including sysfs interface reads. | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-39927 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ] | ||||
| CVE-2025-39862 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix list corruption after hardware restart Since stations are recreated from scratch, all lists that wcids are added to must be cleared before calling ieee80211_restart_hw. Set wcid->sta = 0 for each wcid entry in order to ensure that they are not added again before they are ready. | ||||
| CVE-2025-39789 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: x86/aegis - Add missing error checks The skcipher_walk functions can allocate memory and can fail, so checking for errors is necessary. | ||||
| CVE-2025-39732 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask() ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: <TASK> dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.cold Change to ieee80211_iterate_stations_mtx() to fix this issue. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 | ||||
| CVE-2025-38656 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start() Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs. | ||||
| CVE-2025-38421 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. | ||||
| CVE-2025-38292 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid access to memory In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only. | ||||
| CVE-2025-38187 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ] | ||||
| CVE-2025-38137 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log] | ||||
| CVE-2025-38060 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: copy_verifier_state() should copy 'loop_entry' field The bpf_verifier_state.loop_entry state should be copied by copy_verifier_state(). Otherwise, .loop_entry values from unrelated states would poison env->cur_state. Additionally, env->stack should not contain any states with .loop_entry != NULL. The states in env->stack are yet to be verified, while .loop_entry is set for states that reached an equivalent state. This means that env->cur_state->loop_entry should always be NULL after pop_stack(). See the selftest in the next commit for an example of the program that is not safe yet is accepted by verifier w/o this fix. This change has some verification performance impact for selftests: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- ------------- arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%) arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%) arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%) iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%) iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%) iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%) kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%) verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%) verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%) And significant negative impact for sched_ext: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------ bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%) bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%) bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%) bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%) bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%) bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%) bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%) bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%) scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%) scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%) scx_qmap.bpf.o qmap_dispatch ---truncated--- | ||||
| CVE-2025-37906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started. | ||||
| CVE-2025-23132 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: quota: fix to avoid warning in dquot_writeback_dquots() F2FS-fs (dm-59): checkpoint=enable has some unwritten data. ------------[ cut here ]------------ WARNING: CPU: 6 PID: 8013 at fs/quota/dquot.c:691 dquot_writeback_dquots+0x2fc/0x308 pc : dquot_writeback_dquots+0x2fc/0x308 lr : f2fs_quota_sync+0xcc/0x1c4 Call trace: dquot_writeback_dquots+0x2fc/0x308 f2fs_quota_sync+0xcc/0x1c4 f2fs_write_checkpoint+0x3d4/0x9b0 f2fs_issue_checkpoint+0x1bc/0x2c0 f2fs_sync_fs+0x54/0x150 f2fs_do_sync_file+0x2f8/0x814 __f2fs_ioctl+0x1960/0x3244 f2fs_ioctl+0x54/0xe0 __arm64_sys_ioctl+0xa8/0xe4 invoke_syscall+0x58/0x114 checkpoint and f2fs_remount may race as below, resulting triggering warning in dquot_writeback_dquots(). atomic write remount - do_remount - down_write(&sb->s_umount); - f2fs_remount - ioctl - f2fs_do_sync_file - f2fs_sync_fs - f2fs_write_checkpoint - block_operations - locked = down_read_trylock(&sbi->sb->s_umount) : fail to lock due to the write lock was held by remount - up_write(&sb->s_umount); - f2fs_quota_sync - dquot_writeback_dquots - WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount)) : trigger warning because s_umount lock was unlocked by remount If checkpoint comes from mount/umount/remount/freeze/quotactl, caller of checkpoint has already held s_umount lock, calling dquot_writeback_dquots() in the context should be safe. So let's record task to sbi->umount_lock_holder, so that checkpoint can know whether the lock has held in the context or not by checking current w/ it. In addition, in order to not misrepresent caller of checkpoint, we should not allow to trigger async checkpoint for those callers: mount/umount/remount/ freeze/quotactl. | ||||
| CVE-2025-21722 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty() to set a data or metadata buffer as dirty, but it detects that the buffer is not in the uptodate state: WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520 fs/buffer.c:1177 ... Call Trace: <TASK> nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598 nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73 nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344 nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The other is when nilfs_btree_propagate(), which propagates the dirty state to the ancestor nodes of a b-tree that point to a dirty buffer, detects that the origin buffer is not dirty, even though it should be: WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089 nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089 ... Call Trace: <TASK> nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345 nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587 nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006 nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline] nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115 nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline] nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Both of these issues are caused by the callbacks that handle the page/folio write requests, forcibly clear various states, including the working state of the buffers they hold, at unexpected times when they detect read-only fallback. Fix these issues by checking if the buffer is referenced before clearing the page/folio state, and skipping the clear if it is. | ||||