Export limit exceeded: 20958 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20958 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-48800 | 1 Notepad-plus-plus | 1 Notepad++ | 2026-06-29 | 7.8 High |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.6.1, the <Command> tag text content inside <UserDefinedCommands> in shortcuts.xml is read by NppXml::value(aNode) (Parameters.cpp:3658) in the feedUserCmds() function and stored in UserCommand._cmd without any validation. When the user clicks the corresponding entry in the Run menu, NppCommands.cpp:4264 creates a Command object with string2wstring(ucmd.getCmd()) and calls run(), which invokes ShellExecute (RunDlg.cpp:221) with the attacker-controlled string as the executable path. The injected command appears as a normal menu item in the Run menu, making it a viable persistence mechanism. This vulnerability is fixed in 8.9.6.1. | ||||
| CVE-2026-48778 | 1 Notepad-plus-plus | 1 Notepad++ | 2026-06-29 | 7.8 High |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.6.1, the <GUIConfig name="commandLineInterpreter"> tag in config.xml is read by NppXml::value() (Parameters.cpp:6430) and stored in _nppGUI._commandLineInterpreter without any validation, whitelist, or digital signature check. When the user triggers IDM_FILE_OPEN_CMD (File → Open Containing Folder → cmd), NppCommands.cpp:228 creates a Command object with this value and calls run(), which invokes ShellExecute (RunDlg.cpp:221) with the attacker-controlled string as the executable path. This vulnerability is fixed in 8.9.6.1. | ||||
| CVE-2026-53428 | 1 Leandrocp | 2 Mdex, Mdex Native | 2026-06-29 | N/A |
| Memory Allocation with Excessive Size Value vulnerability in leandrocp mdex allows an unauthenticated attacker to cause a denial of service through unbounded memory allocation. comrak_nif::lumis_adapter::LumisAdapter::parse_highlight_lines in native/comrak_nif/src/lumis_adapter.rs eagerly expands a user-controlled inclusive line range from a fenced code block's highlight_lines decorator into a Vec<usize>, pushing one element per integer in the range with no upper bound on the range size. An attacker who can supply Markdown that an application renders with MDEx.to_html/2 (for example a comment, chat message, or wiki page) can embed a code block whose info string is rust highlight_lines="1-100000000", forcing the native adapter to allocate roughly 8 bytes per line in the range. A payload that differs by only a few bytes can therefore allocate hundreds of megabytes, and a sufficiently large range (for example 1-2000000000) exhausts host memory and aborts the BEAM, denying service to every user of the rendering process. The per-line write loop additionally tests membership with a linear scan over the same vector, degrading rendering to a quadratic cost even for ranges that do not immediately exhaust memory. The vulnerable native code originally shipped inside mdex (in native/comrak_nif/src/lumis_adapter.rs) and was later extracted into the separate mdex_native package (native/mdex_native_nif/src/lumis_adapter.rs), where it remains unpatched. This issue affects mdex from 0.11.0 before 0.12.3, and mdex_native from 0.1.0 before 0.2.3. | ||||
| CVE-2026-13606 | 1 Graphicsmagick | 1 Graphicsmagick | 2026-06-29 | 8.1 High |
| A flaw was found in GraphicsMagick's Photo CD (PCD) decoder. A remote attacker could exploit this vulnerability by providing a specially crafted PCD file. This could lead to an out-of-bounds write, corrupting memory and potentially causing a denial of service or other unpredictable system behavior. | ||||
| CVE-2026-13592 | 1 Liftoff-sr | 1 Cipster | 2026-06-29 | 7.3 High |
| A vulnerability was detected in liftoff-sr CIPster up to e8e9dba09bf56962807d3504b783ccdb6287f3e4. Affected by this issue is the function BufWriter::append of the component EtherNet IP Message Handler. Performing a manipulation results in out-of-bounds write. Remote exploitation of the attack is possible. The exploit is now public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The patch is named 3a0159ed43125dcd024a1965f0289cb186bae9ff. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-55697 | 1 Pnpm | 1 Pnpm | 2026-06-29 | 7.5 High |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm can install configDependencies declared in pnpm-workspace.yaml before command dispatch. Before the patch, a repository could declare pacquet or @pnpm/pacquet as a config dependency and pnpm treated that repository-controlled dependency as an install-engine opt-in. During install, pnpm resolved a platform-specific @pacquet/<platform>-<arch>/pacquet binary from node_modules/.pnpm-config/<packageName> and spawned it as the developer or CI user. This vulnerability is fixed in 10.34.2 and 11.5.3. | ||||
| CVE-2026-13581 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 6.3 Medium |
| A vulnerability was detected in Edimax EW-7478APC 1.04. This vulnerability affects the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component POST Request Handler. The manipulation of the argument rootAPmac results in os command injection. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-13545 | 1 D-link | 1 Dcs-935l | 2026-06-29 | 8.8 High |
| A vulnerability has been found in D-Link DCS-935L 1.10.01. This affects the function sub_400E40 of the file setconf.cgi of the component POST Parameter Handler. Such manipulation of the argument UID leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-10643 | 1 Zephyrproject | 1 Zephyr | 2026-06-29 | 8.7 High |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. | ||||
| CVE-2026-58049 | 1 Ffmpeg | 1 Ffmpeg | 2026-06-29 | 8.6 High |
| FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption. | ||||
| CVE-2026-10644 | 1 Zephyrproject | 1 Zephyr | 2026-06-29 | 4.2 Medium |
| The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes. | ||||
| CVE-2026-49869 | 1 Kestra-io | 1 Kestra | 2026-06-29 | 10 Critical |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. | ||||
| CVE-2026-45258 | 1 Freebsd | 1 Freebsd | 2026-06-29 | 7.8 High |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). | ||||
| CVE-2026-13561 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 6.3 Medium |
| A vulnerability was detected in Edimax EW-7478APC 1.04. The impacted element is the function formiNICbasic of the file /goform/formiNICbasic of the component POST Request Handler. The manipulation of the argument rootAPmac results in os command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-58050 | 1 Libssh2 | 1 Libssh2 | 2026-06-29 | 7 High |
| libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client. | ||||
| CVE-2026-13560 | 1 Edimax | 1 Ew-7478apc | 2026-06-29 | 6.3 Medium |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. The affected element is the function formAccept of the file /goform/formAccept of the component POST Request Handler. The manipulation of the argument submit-url leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-56211 | 2 Aomedia, Redhat | 5 Libaom, Enterprise Linux, Enterprise Linux Ai and 2 more | 2026-06-29 | 7.1 High |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. | ||||
| CVE-2026-56209 | 2 Aomedia, Redhat | 5 Libaom, Enterprise Linux, Enterprise Linux Ai and 2 more | 2026-06-29 | 7.1 High |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||