Export limit exceeded: 372758 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372758 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372758 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64340 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64355 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP. | ||||
| CVE-2026-64361 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward. | ||||
| CVE-2026-64364 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit. | ||||
| CVE-2026-65441 | 2 Nexcess, Wordpress | 2 Givewp, Wordpress | 2026-07-28 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in GiveWP <= 4.16.3 versions. | ||||
| CVE-2026-53669 | 1 Remix-run | 1 React-router | 2026-07-28 | 5.4 Medium |
| React Router is a router for React. Versions 6.0.0 through 7.17.0 are vulnerable to Open Redirtect through use of backslashes in <Link> and useNavigate. This issue is a follow up to CVE-2025-68470 and has been fixed in version 7.18.0. | ||||
| CVE-2026-54099 | 1 Redhat | 4 Openshift, Openshift Container Platform, Openshift For Windows Containers and 1 more | 2026-07-28 | 8.8 High |
| A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. The WICD CSR auto-approver validates that a Certificate Signing Request contains the organization system:wicd-nodes but does not reject additional organization values such as system:masters. A compromised Windows worker node that holds WICD credentials can submit a CSR that is auto-approved and signed by the cluster, yielding a client certificate that grants cluster-administrator privileges and enabling full cluster takeover. | ||||
| CVE-2026-54100 | 1 Redhat | 4 Openshift, Openshift Container Platform, Openshift For Windows Containers and 1 more | 2026-07-28 | 8.3 High |
| A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. WMCO establishes SSH connections to Windows worker nodes without verifying the remote server host key. An adjacent-network attacker who can intercept or redirect WMCO's SSH session can capture WICD and kubelet bootstrap credentials transferred during node configuration, enabling compromise of Windows node identities in the cluster. | ||||
| CVE-2026-64372 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently. | ||||
| CVE-2026-64385 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64390 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again. | ||||
| CVE-2026-64411 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. | ||||
| CVE-2026-64416 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to __swap_cgroup_id_lookup() without checking that the type was ever registered via swap_cgroup_swapon(). On a swapless host every ctrl->map is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled swp_offset(). Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a real swap entry, without first validating it against swap_info[]. A single PTE corrupted into a type-0 swap entry takes the host down at process exit. We hit this in production on a swapless 6.12.58 host: ~1s of "get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being correctly defensive about the same entry) followed by BUG: unable to handle page fault for address: 000003f800204220 RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60 Call Trace: swap_pte_batch+0xbf/0x230 zap_pte_range+0x4c8/0x780 unmap_page_range+0x190/0x3e0 exit_mmap+0xd9/0x3c0 do_exit+0x20c/0x4b0 syzbot has reported the identical stack. The source of the PTE corruption is a separate bug; this change makes the teardown path as robust as the fault path already is. Every other caller of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has already validated the entry, so the new branch is cold. | ||||
| CVE-2026-64425 | 1 Linux | 1 Linux Kernel | 2026-07-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items can still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue running after exit has begun. Move the check further inside, so it covers linked items too. Note: this is a syzbot special as it loves setting up tons of slow linked work on weird devices like msr that take forever to read, and immediately close the ring. Exit then takes a long time. | ||||
| CVE-2026-64776 | 1 Apple | 1 Macos | 2026-07-28 | 5.5 Medium |
| The issue was addressed with improved bounds checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to disclose kernel memory. | ||||
| CVE-2026-64453 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-64470 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||
| CVE-2026-64494 | 1 Linux | 1 Linux Kernel | 2026-07-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. | ||||
| CVE-2026-64505 | 1 Linux | 1 Linux Kernel | 2026-07-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check for header Add a length check for the rndis header in rndis_rm_hdr, to ensure that MessageType, MessageLength, DataOffset, and DataLength fields are present before they are accessed. | ||||
| CVE-2021-32084 | 1 Quest | 1 Kace Systems Deployment Appliance | 2026-07-28 | 9.8 Critical |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. If a customer restricts access to the web console by IP address or subnets, the API endpoints are not restricted. If credentials/API keys are known to an attacker, the appliance can still be accessed via the API, leading to a potential compromise of the entire environment that is configured for KACE. | ||||