Export limit exceeded: 370548 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370548 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64343 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64345 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch. | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64349 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs | ||||
| CVE-2026-64351 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. | ||||
| CVE-2026-64352 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A sleepable LSM hook that ends up touching an LPM trie therefore triggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E ----------------------------- kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage! 1 lock held by net_tests/540: #0: (rcu_tasks_trace_srcu_struct){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x26/0x280 Call Trace: dump_stack_lvl lockdep_rcu_suspicious trie_lookup_elem bpf_prog_..._enforce_security_socket_connect bpf_trampoline_... security_socket_connect __sys_connect do_syscall_64 This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize against the trie's reclaim path -- but it spams the console once per distinct callsite on every debug kernel running a sleepable BPF LSM that touches an LPM trie, which is increasingly common. For the lookup path, switch the rcu_dereference_check() annotation from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all three contexts (classic, BH, Tasks Trace). Other map types already follow this convention. For trie_update_elem() and trie_delete_elem(), annotate the walks as rcu_dereference_protected(*p, 1) -- matching trie_free() in the same file -- since trie->lock is held across the walk. rqspinlock has no lockdep_map, so the predicate degenerates to '1' rather than lockdep_is_held(&trie->lock); the protection is real but not machine-verifiable. trie_get_next_key() also uses bare rcu_dereference() but is reachable only from the BPF syscall, which holds classic rcu_read_lock() before dispatching, so it is left untouched. | ||||
| CVE-2026-64353 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map. | ||||
| CVE-2026-64356 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix memory leak in xfs_dqinode_metadir_create() If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current code returns directly, leaking the allocated update and transaction state. If the subsequent commit fails, the caller-owned inode reference is left behind. Fix this memory leak by routing the create failure path through xfs_metadir_cancel(). For both create and commit failures, finish and release any inode returned to the caller, mirroring the unwind pattern in xfs_metadir_mkdir(). The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. Runtime validation used kprobe fault injection during `mount -o uquota` on a metadir XFS image. Injecting xfs_metadir_create() reproduced the old active-update path that left mount stuck later in mount setup; after this change, the same injection reported cancel_hits=1 and irele_hits=1. Injecting xfs_metadir_commit() exercised the old inode-reference leak path; after this change, it reported irele_hits=1. | ||||
| CVE-2026-64357 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchmaps reservation limit check xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt overhead to a local resblks variable, but the final UINT_MAX check still tests req->resblks. That is the reservation value from before the overhead was added. The computed value is stored back in req->resblks and later passed to xfs_trans_alloc(), whose block reservation argument is unsigned int. Check the computed reservation so the existing limit applies to the value that will be used. | ||||
| CVE-2026-64358 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: cancel workqueue on release for supported platforms only Since a recent fix the mtk_jpeg_release function cancels any pending or running work present in the driver workqueue using cancel_work_sync function. Currently, only the multicore based variants use this workqueue and they have the jpeg_worker platform data field initialized with a workqueue callback function. For the others, this field value remain NULL by default. The cancel_work_sync function is unconditionally called in mtk_jpeg_release function, even for the variants that do not use the workqueue. This call generates a WARN_ON print in __flush_work because the workqueue callback function presence check fails in __flush_work function (used by cancel_work_sync). So, to avoid these warnings, call cancel_work_sync only if a workqueue callback is defined in platform data. | ||||
| CVE-2026-64366 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo doesn't have enough space for the incoming report. If the kfifo is empty, kfifo_skip() reads stale data left in the kmalloc'd buffer via __kfifo_peek_n() and interprets it as a record length, advancing fifo->out by that garbage value. This corrupts the internal kfifo state, causing kfifo_unused() to return a value much larger than the actual buffer size, which bypasses __kfifo_in_r()'s guard: if (len + recsize > kfifo_unused(fifo)) return 0; kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to 3842 bytes past the 256-byte buffer. Add a !kfifo_is_empty() condition to the while loop so kfifo_skip() is never called on an empty fifo, and check the return value of kfifo_in() to reject reports that are too large for the fifo. | ||||
| CVE-2026-64368 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly. | ||||
| CVE-2026-64370 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function. | ||||
| CVE-2026-64384 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64388 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server. | ||||
| CVE-2026-64391 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for ADS I/O Alternate data streams are stored as xattrs. Unlike regular file I/O, their read and write paths therefore call VFS xattr helpers which recheck inode permissions and LSM policy using the current task credentials. Run ADS I/O with the credentials captured when the SMB handle was opened. | ||||
| CVE-2026-64403 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length. | ||||
| CVE-2026-64406 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in bt_accept_dequeue() bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths. | ||||
| CVE-2026-64407 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent. | ||||
| CVE-2026-64408 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: pin L2CAP connection during netdev registration bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Take a reference to the L2CAP connection while holding the channel lock. Retain it until register_netdev() has taken the parent device reference. | ||||