Export limit exceeded: 380538 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 380538 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380538 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74392 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm: limit target bio polling to one shot dm_poll_bio() is the ->poll_bio() callback for a stacked dm device. The caller only knows about the dm queue, so it may decide to do a spinning poll if it thinks a single queue is being polled. Passing those flags unchanged to the mapped clone lets blk_mq_poll() spin on a target queue from inside dm_poll_bio(). With io_uring IOPOLL on a dm-stripe target this can keep a task in dm_poll_bio() -> bio_poll() -> blk_mq_poll() long enough to trigger an RCU CPU stall, before io_uring gets back to io_iopoll_check() and its need_resched() check. Keep dm's ->poll_bio() bounded by forcing one-shot polling for target bios. The caller can invoke dm_poll_bio() again if it wants to keep polling, and it also gets a chance to reap completions or reschedule between passes. | ||||
| CVE-2026-74393 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/syncobj: Fix memory leak in drm_syncobj_find_fence() Commit 18226ba52159 ("drm/syncobj: reject invalid flags in drm_syncobj_find_fence") forgot to take into account the fact that drm_syncobj_find() takes a reference to syncobj and returns early without dropping the reference, leading to memory leaks. Reported by: Sam Spencer <[email protected]> | ||||
| CVE-2026-74415 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: atcspi200: fix use-after-free when driver unbind DMA resource is initialized after SPI controller registration. So when driver unbind, this can trigger a use-after-free when DMA is torn down while the controller is still alive and triggers DMA transfers. | ||||
| CVE-2026-74416 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix memory leak in radeon_ring_restore() on lock failure radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the error. | ||||
| CVE-2026-74421 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74424 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles. | ||||
| CVE-2026-19898 | 1 Victoriametrics | 1 Victoriametrics | 2026-08-15 | 3.7 Low |
| A vulnerability was found in VictoriaMetrics up to 1.146.0. Impacted is the function requestHandler of the file app/vmauth/main.go of the component VMAuth Authentication Endpoint. Performing a manipulation results in improper restriction of excessive authentication attempts. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made public and could be used. Upgrading to version 1.147.0 is recommended to address this issue. The patch is named 119ba0fb5be8024d50c5ba946599b2e69e8803ea. Upgrading the affected component is recommended. | ||||
| CVE-2026-74477 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. | ||||
| CVE-2026-74571 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. [ Squash the fs_is_full_ro() export commit into this one. ] | ||||
| CVE-2026-74524 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove remove_pud_mapping() and remove_p4d_mapping() obtain a child table base with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for addr. RISC-V folds page-table levels at runtime. When a level is folded, its offset helper returns the parent entry itself, but the index can still be nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39 folds both P4D and PUD, so memory hot-remove can descend into unrelated memory and pass an invalid page to __free_pages(). This can trigger: kernel BUG at include/linux/mm.h:1810! VM_BUG_ON_PAGE(page_ref_count(page) == 0) arch_remove_memory+0x1e/0x5c try_remove_memory+0x15e/0x200 remove_memory+0x24/0x3c Only add the index when the corresponding page-table level is enabled, matching p4d_offset() and pud_offset(). | ||||
| CVE-2026-74543 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 | ||||
| CVE-2026-74558 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | ||||
| CVE-2026-74560 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/[email protected]/ | ||||
| CVE-2026-19897 | 1 Mangroup | 1 Dtale | 2026-08-15 | 3.7 Low |
| A vulnerability has been found in mangroup dtale up to 3.22.0. This issue affects the function Login of the file dtale/auth.py of the component Login Endpoint. Such manipulation leads to improper restriction of excessive authentication attempts. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74486 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. | ||||
| CVE-2026-74502 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: fix double free of out_cvts on rawmidi error snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with kfree() but leaves ump->out_cvts pointing at the freed memory. When the endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts a second time, resulting in a double free. The host snd-usb-audio driver attaches the legacy rawmidi for any USB MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail reaches this path on enumeration. Clear ump->out_cvts after freeing it on the error path so it is not freed again during teardown. Discovered by XBOW, triaged by Baul Lee <[email protected]> | ||||
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74504 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation. | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74526 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths where host I/O may already be blocked. GFP_KERNEL allocations here, both the local kzalloc_obj() and the ones inside kobject_uevent_env() itself, can trigger reclaim that waits on that blocked I/O and deadlock. Use memalloc_noio_save()/restore() to cover the whole call instead of just the local allocation. | ||||