Export limit exceeded: 371382 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371382 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64525 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak. | ||||
| CVE-2026-64518 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key(). lockdep_sock_is_held() was added in tcp_ao_established_key() by the cited commit. It can be called from tcp_v[46]_timewait_ack() with twsk. Since it does not have sk->sk_lock, the lockdep annotation results in out-of-bound access. $ pahole -C tcp_timewait_sock vmlinux | grep size /* size: 288, cachelines: 5, members: 8 */ $ pahole -C sock vmlinux | grep sk_lock socket_lock_t sk_lock; /* 440 192 */ Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. | ||||
| CVE-2026-64500 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: lpc32xx: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ lpc32xx_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). | ||||
| CVE-2026-64488 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. | ||||
| CVE-2026-64486 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64457 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths. | ||||
| CVE-2026-64371 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock | ||||
| CVE-2026-64360 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. | ||||
| CVE-2026-64348 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-64329 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis. | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64302 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix freeing of PMD-sized vmemmap pages Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from freeing non-boot page tables through __free_pages() to pagetable_free(). However, the function is also called to free vmemmap pages. Given that vmemmap pages are not page tables, already the page_ptdesc(page) is wrong. But worse, pagetable_free() calls: __free_pages(page, compound_order(page)); Since vmemmap pages are not compound pages (see vmemmap_alloc_block()) -- except for HVO, which doesn't apply here -- only first page of a PMD-sized vmemmap page is freed, leaking the other ones. Fix it by properly decoupling pagetable and vmemmap freeing. free_pagetable() no longer has to mess with SECTION_INFO, as only the vmemmap is marked like that in register_page_bootmem_memmap(). The indentation in remove_pmd_table() is messed up. Fix that while touching it. Bootmem info handling will soon be fixed up. For now, handle it similar to free_pagetable(), just avoiding the ifdef. [ dhansen: changelog munging. More imperative voice ] | ||||
| CVE-2026-15767 | 1 Google | 1 Chrome | 2026-07-25 | 8.8 High |
| Heap buffer overflow in libyuv in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted video file. (Chromium security severity: High) | ||||
| CVE-2026-15774 | 1 Google | 1 Chrome | 2026-07-25 | 8.3 High |
| Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-15775 | 1 Google | 1 Chrome | 2026-07-25 | 6.5 Medium |
| Inappropriate implementation in V8 in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-15776 | 1 Google | 1 Chrome | 2026-07-25 | 8.8 High |
| Inappropriate implementation in V8 in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-26719 | 2026-07-25 | 6.1 Medium | ||
| Cross Site Scripting vulnerability in xxl-job-admin v.3.0.0 allows a remote attacker to execute arbitrary code via a crafted HTTP GET request containing a malicious script | ||||
| CVE-2026-56764 | 1 Hono | 1 Hono | 2026-07-25 | 3.7 Low |
| Hono before 4.11.10 contains a timing attack vulnerability in the basicAuth and bearerAuth middlewares due to non-constant-time string comparison in the timingSafeEqual function. Attackers can exploit early termination of string equality checks to infer valid credentials through precise timing measurements. | ||||
| CVE-2026-58551 | 1 Huawei | 1 Harmonyos | 2026-07-25 | 5.1 Medium |
| Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. | ||||