Export limit exceeded: 404234 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (404234 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98325 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set up the TX info early to fix failure paths The previous commit 2c51457d930f ("wifi: mac80211: free ack status frame on TX header build failure") cleaned up the leak, but still left the code a bit messy and the failed SKB didn't get reported to userspace. Fix this up by initialising skb->cb[] earlier, which allows using ieee80211_free_txskb() and therefore reports it for the failure in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize() failure path with it. | ||||
| CVE-2026-98340 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: only group hidden BSSes with beacon entries When a probe response for an unknown BSS comes in, __cfg80211_bss_update() looks for an existing entry with the same BSSID and a hidden (zero-length or NUL-filled) SSID, and if it finds one it groups them, using the beacon IEs from the existing entry. But that could find another entry without a beacon, if it was also from a probe response (with SSID), so there's a group without beacon elements. If a beacon with a hidden SSID for that BSSID arrives later, cfg80211_combine_bsses() goes looking for the probe response entries that belong to it - i.e. entries with the same BSSID and channel that have no beacon IEs - and finds those two. They are already grouped with each other, so it hits its WARN_ON_ONCE(bss->pub.hidden_beacon_bss) WARN_ON_ONCE(!list_empty(&bss->hidden_list)) which are there because an entry without beacon elements is not supposed to be part of a group yet. Only combine entries when a beacon was already received, ones that are kept separate will be combined when a beacon arrives. | ||||
| CVE-2025-56362 | 1 Csa-iot | 1 Matter | 2026-10-07 | 5.7 Medium |
| A reachable assertion vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.2, specifically within the Level Control cluster's periodic server tick logic. When a MoveToLevel command is sent and immediately followed by a write of OperationMode=2 (in the Pump Configuration and Control cluster), the server tick function violates the assertion `currentLevel < maxLevel`, resulting in a crash. This can be exploited remotely without authentication to cause denial of service. Affected versions include 1.3 and 1.4 (commit ab3d5ae). | ||||
| CVE-2026-98331 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs from the local->interfaces list when an interface is removed via ieee80211_if_remove(), before it unregisters the netdev. However, it's possible for a netdev to be unregistered without going through that: When the netns that holds the wiphy is destroyed, the wiphy is supposed to move to the init_ns, but that can run into allocation failures. Then, mac80211 has an interface listed that doesn't exist, and will eventually hit BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()! ... _cfg80211_unregister_wdev+0x24/0x36a [cfg80211] cfg80211_unregister_wdev+0x15/0x1d [cfg80211] ieee80211_remove_interfaces+0x1ff/0x257 [mac80211] ieee80211_unregister_hw+0x73/0x1d1 [mac80211] mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim] Remove the interface from the list in ->ndo_uninit if it's still around to avoid this. | ||||
| CVE-2026-98362 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate dvfs_get_idx() may return an out-of-range index if the SCP firmware is buggy or returns a stale value. Only negative indexes were rejected, so a large index walked past info->opps and could treat garbage as a clock rate (KASAN OOB / wrong frequency to consumers). The missing upper bound dates back to the original SCPI clock driver. Treat indexes >= opp count as invalid and return 0, same as idx < 0. | ||||
| CVE-2026-98371 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | ||||
| CVE-2026-82531 | 2 Newmediacompany, Smarty-php | 2 Smarty, Smarty | 2026-10-07 | 8.1 High |
| Smarty before 4.5.8 and 5.x before 5.8.5 contains a code injection vulnerability where the top-level nocache_hash is never restored during extends:/multi-component template inheritance, leaving it null. Attackers can supply assigned data containing a forged SmartyNocache marker that is copied verbatim into the regenerated PHP cache file, executing arbitrary PHP on include for remote code execution. | ||||
| CVE-2026-93225 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: fix typec switch leak on probe error path If probe fails after imx95_usb_phy_get_tca() succeeds, the typec switch leaks because the only cleanup path was in .remove(), which never runs on probe failure. Use devm_add_action_or_reset() so the switch is cleaned up on both probe failure and driver removal. The imx95_usb_phy_put_tca() is no longer needed, it will be removed in .remove() too. | ||||
| CVE-2026-103627 | 1 Google | 1 Chrome | 2026-10-07 | 6.5 Medium |
| Information leak in SVG in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-98257 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: use rds_conn_drop() on protocol version mismatch rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with conn->c_cm_lock held. When the peer negotiates a protocol version older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls rds_conn_destroy(), which is only safe in the rmmod path: it synchronously tears the connection down and flush_work()es the shutdown work cp_down_w. That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is the very lock the event handler still holds, so the flush never completes: the two workers wait on each other and the RDS connection workqueues stall for good. All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR, DISCONNECTED) use rds_conn_drop(), which marks the connection RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use it here as well. | ||||
| CVE-2026-98281 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Also allocate private hash on vfork() As Jann demonstrated, it is entirely feasible to access the mm through vfork(). Therefore we need to allocate a private hash on vfork() as well as any other CLONE_VM user. Specifically, it must be avoided to have (private) futex waiters before allocating the private hash. | ||||
| CVE-2026-98324 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: pxa: fix double counting of the hw descriptors pxad_alloc_desc() was converted from kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT) to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc itself - but only where the compiler has __builtin_counted_by_ref(), so from gcc 15.1 or clang 22.1 on. The loop below it still increments nb_desc, which makes it come out doubled there and correct elsewhere. nb_desc is what pxad_free_desc() iterates over and what set_updater_desc() indexes from, so set it explicitly and drop the increment. The error path has to lower it to the number of descriptors allocated so far, otherwise pxad_free_desc() would free entries that were never allocated. | ||||
| CVE-2026-98330 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace is destroyed, cfg80211_pernet_exit() moves any wiphy back to the initial namespace, and just warns if that fails. But moving an interface can fail (due to allocation failures), and then the wiphy is left behind with a garbage netns pointer: Kernel mode fault at addr 0x30 genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211] nl80211_notify_wiphy+0xcd/0xe8 [cfg80211] wiphy_unregister+0x169/0x3fc [cfg80211] Note that commit debac3a20dec ("net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().") fixed another path that could reach it without allocation failures. Remove interfaces that cannot be moved instead of failing the switch, so that the wiphy always ends up in the initial namespace. In this case the netdev core will unregister the interfaces anyway. | ||||
| CVE-2026-98190 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix out-of-bounds read in P2P public action frames wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once ieee80211_is_public_action() returns true. That helper only verifies the frame is long enough for the action category field, that is offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both functions then read the P2P public action header up to oui_subtype at offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32. A public action frame of 25 to 31 bytes passes the check but is shorter than that 32 byte header, so oui_subtype can be read out of bounds, and because the length is unsigned, "size - ie_offset" underflows to a value close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length, so even the size_t subtraction in mgmt_tx() is truncated to the same value. It then walks far past the buffer searching for a vendor element until it reaches unmapped memory. In the receive path the frame arrives over the air and needs no association, so a nearby unauthenticated device can crash the host while it is in P2P listen. Reject frames shorter than the P2P public action header in both paths before dereferencing it. | ||||
| CVE-2026-98217 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mlx4: Fix use-after-free on pkey sysfs registration failure register_pkey_tree() ignores errors from register_one_pkey_tree() and continues registering the remaining slaves. The per-slave error path has already released the pkey parent kobjects, but their pointers remain stored in the device. A later device cleanup therefore passes the stale pointers to kobject_put(), causing a use-after-free. Clear the parent pointers after releasing a failed slave tree and skip unregistered trees during device cleanup. This preserves the existing best-effort registration behavior while preventing a second cleanup of the failed tree. | ||||
| CVE-2026-98286 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_monitor teardown paths (net_dm_trace_off_set(), net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set() and net_dm_hw_monitor_start()), per-CPU timers are stopped using timer_delete_sync() followed by cancel_work_sync(). However, there is a circular dependency between send_timer and dm_alert_work: 1) sched_send_work() (timer callback) schedules dm_alert_work. 2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data() or net_dm_hw_reset_per_cpu_data(). 3) If memory allocation fails under memory pressure in the reset function, it re-arms the timer via mod_timer(&data->send_timer, ...). If dm_alert_work is running concurrently while timer_delete_sync() executes on another CPU, an allocation failure in the worker will re-arm the timer after timer_delete_sync() has already returned. Once cancel_work_sync() completes and module_put() is called, the timer remains active in the timer wheel. If the module is then unloaded, the timer will fire and execute sched_send_work() in freed memory, triggering a kernel panic / use-after-free. Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees that any in-flight timer handler has finished and prevents subsequent re-arming attempts from running workers from succeeding. When monitoring is restarted later, timer_setup() is invoked, which cleanly re-initializes the timer. | ||||
| CVE-2026-98287 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pppoatm: ensure a writable skb header and linear data In pppoatm_send(), LLC encapsulation checks whether there is sufficient headroom for the 4-byte LLC header, but does not ensure that the skb header is writable. Normal transmit packets passing through ppp_start_xmit() have their header unshared via skb_cow_head(). However, packets can also reach pppoatm_send() via PPP channel bridging (PPPIOCBRIDGECHAN) without going through ppp_start_xmit(). Use skb_cow_head() to ensure both sufficient headroom and a writable header before pushing the LLC header. While at it: - Call pskb_may_pull(skb, 1) before inspecting skb->data[0] to prevent out-of-bounds reads on zero-length or non-linear frames (e.g. from bridging). - Defer SC_COMP_PROT protocol compression until after pppoatm_may_send() succeeds. This eliminates the temporary skb allocation on admission failure and completely removes the fragile "undo" heuristic at the nospace label, avoiding any risk of reading uninitialized headroom or performing an unbalanced skb_push(). | ||||
| CVE-2026-73570 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-10-07 | 8.9 High |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. | ||||
| CVE-2026-98171 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. | ||||
| CVE-2025-32151 | 2 Themekraft, Wordpress | 2 Buddyforms, Wordpress | 2026-10-07 | 7.5 High |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Themekraft BuddyForms buddyforms allows PHP Local File Inclusion.This issue affects BuddyForms: from n/a through 2.10.2. | ||||