Export limit exceeded: 16985 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 24542 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24542 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-116781 | 2 Freeswitch, Signalwire | 2 Freeswitch, Freeswitch | 2026-11-10 | 5.3 Medium |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, ws_read_frame() unmasked a WebSocket payload by iterating wsh->datalen, which included frame headers, while indexing from the payload pointer. A masked frame filling the 64 KiB receive buffer could therefore XOR up to 14 bytes beyond the buffer, and the exact-capacity case also wrote a terminating NUL one byte out of bounds. The flaw is reachable before authentication when mod_xml_rpc and its opt-in WebSocket endpoint are enabled, while both features are disabled in the stock configuration. The writes remain within the same connection handle's adjacent outbound buffer, so neither a process crash nor cross-session disclosure has been demonstrated. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-116783 | 2 Freeswitch, Signalwire | 2 Freeswitch, Freeswitch | 2026-11-10 | 8.2 High |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, udptl_rx_packet() used a peer-controlled FEC entry count directly to fill five-entry FEC arrays in a mod_spandsp T.38 session. A larger count wrote sender-controlled error-recovery data beyond those arrays and persisted the oversized count for a later reconstruction pass. Any peer able to deliver UDPTL to an established T.38 fax session can reach the parser, including deployments using fax applications or a T.38 gateway. The memory corruption can crash FreeSWITCH and end every active call, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-116785 | 2 Freeswitch, Signalwire | 2 Freeswitch, Freeswitch | 2026-11-10 | 9.1 Critical |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, ws_read_frame() decoded a WebSocket frame's 64-bit extended payload length with a 32-bit byte swap and narrowed the result into a signed length. A value whose surviving low word became negative bypassed the signed size check and was reinterpreted as an enormous unsigned count, causing client bytes to overwrite memory beyond the 64 KiB receive buffer. Any client completing a /socket WebSocket upgrade on an enabled mod_xml_rpc endpoint reached the parser before HTTP authentication; both the module and WebSocket endpoint are disabled by default. The heap overwrite can corrupt connection pointers and crash FreeSWITCH, ending every concurrent session, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-116787 | 2 Freeswitch, Signalwire | 2 Freeswitch, Freeswitch | 2026-11-10 | 7.5 High |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, mod_event_socket used an unauthenticated Content-Length value directly as the allocation size for an Event Socket message body. Negative or extremely large values could overflow the terminator calculation or force an allocation failure through a helper that aborts the FreeSWITCH process. The header is parsed before the Event Socket password, so any host admitted by apply-inbound-acl can trigger termination with its first packet; the default loopback ACL limits ordinary installations to local clients. The outbound socket dialplan path is also affected when FreeSWITCH connects to a hostile application server, and process termination drops every active call until the service is restarted. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-99273 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged. | ||||
| CVE-2026-99109 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | ||||
| CVE-2026-58879 | 1 Google | 1 Android | 2026-11-10 | 8.4 High |
| In descramble of multiple files, there is a possible out-of-bounds write due to improper casting. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-15035 | 1 Bentoml | 1 Openllm | 2026-11-10 | 5.3 Medium |
| A vulnerability was found in bentoml OpenLLM 0.6.30. This affects the function async_run_command of the file src/openllm/common.py of the component Model Repository Directory Name Handler. Performing a manipulation of the argument cmd results in command injection. Attacking locally is a requirement. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-44606 | 2026-11-10 | N/A | ||
| Out-of-bounds write for some Intel(R) Intelligent Storage Acceleration Library within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2026-58868 | 1 Google | 1 Android | 2026-11-10 | 9.8 Critical |
| In onOutputReceived of FrameDecoder.cpp, there is a possible out-of-bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-66297 | 2 Livebook, Livebook-dev | 2 Livebook, Livebook | 2026-11-10 | 8.0 High |
| Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in livebook-dev livebook allows command injection into generated deployment setup commands. LivebookWeb.Hub.Teams.DeploymentGroupAgentComponent.docker_instructions/2 and LivebookWeb.Hub.Teams.DeploymentGroupAgentComponent.fly_instructions/4 in lib/livebook_web/live/hub/teams/deployment_group_agent_component.ex interpolate deployment group environment variable values into the generated Docker and Fly.io setup commands without shell escaping. The values originate from the deployment group configuration and reach the sinks through Livebook.Hubs.Dockerfile.online_docker_info/3. Both sinks place the value inside a double-quoted shell word, so a value containing a command substitution such as $(...) or backticks is evaluated by the shell without any need to break out of the quoting, and a literal double quote terminates the quoted word and allows arbitrary further tokens. The generated command is displayed in the Livebook web interface with a copy button, so a user who copies it and runs it without reviewing it first executes the injected commands on their own machine, under their own account. An attacker requires privileges sufficient to set deployment group environment variables, while the resulting code execution occurs on the machine of whoever runs the generated command. The Kubernetes instructions are not affected, because they render the same values into a YAML manifest with escaping rather than into a shell command. This issue affects livebook: from 0.13.0 before 0.18.7 and from 0.19.0 before 0.19.9. | ||||
| CVE-2026-94434 | 1 Tubitak Bilgem Software Technologies Research Institute | 1 Pardus Boot Repair | 2026-11-10 | 8.8 High |
| Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus Boot Repair allows OS Command Injection. This issue affects Pardus Boot Repair: from 1.0.8 before 1.0.9. | ||||
| CVE-2026-66334 | 2026-11-10 | N/A | ||
| AMI APTIOV contains vulnerabilities in BIOS where privileged users may cause the “Out-of-Bounds Write” by local access. Successful exploitation of this vulnerability may lead to a denial of service during firmware update processing, such as a crash or failed update if the out-of-bounds write hits unmapped memory. It could also impact Integrity, and Availability. | ||||
| CVE-2026-17402 | 1 Ibm | 1 Api Connect | 2026-11-10 | 9.9 Critical |
| IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to execute arbitrary commands due to OS command injection. User-supplied input is not properly neutralized before it is passed to the operating system, which could allow commands to run on the underlying host. | ||||
| CVE-2026-102715 | 1 Eclipse | 1 Threadx Netx Duo | 2026-11-10 | N/A |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, the mDNS add-on's string cache accepts a shorter name as a match for a longer stored one. A host on the local link can send two mDNS records that make a device performing continuous service discovery write up to three bytes past its transmit packet, corrupting a neighbouring packet or the pool's free list, and misattribute discovered records. | ||||
| CVE-2026-103848 | 1 Adobe | 2 Adobe Experience Manager, Experience Manager | 2026-11-10 | 9.9 Critical |
| Adobe Experience Manager is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in arbitrary code execution in the context of the current user. A low-privileged attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-103844 | 3 Adobe, Apple, Microsoft | 3 Dimension, Macos, Windows | 2026-11-10 | 7.8 High |
| Dimension is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-106625 | 2 Adobe, Microsoft | 4 Adobe Framemaker 2022, Adobe Framemaker 2026, Framemaker and 1 more | 2026-11-10 | 7.8 High |
| Adobe Framemaker is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-100127 | 3 Adobe, Apple, Microsoft | 4 Adobe Bridge, Bridge, Macos and 1 more | 2026-11-10 | 7.8 High |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-89142 | 1 Airoha Technology | 1 Wi-fi Npu Fw | 2026-11-10 | 6.3 Medium |
| In the Wi-Fi NPU FW, there is a possible out-of-bounds write due to an incorrect bounds check. This could lead to local denial of service with user execution privileges needed. User interaction is not needed for exploitation. | ||||