Export limit exceeded: 378141 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378141 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72393 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: don't cache shinfo across skb realloc fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb including the shared info. We can't use the pointer calculated before the call. BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0 Read of size 4 at addr ff110000262edd98 by task swapper/5/0 Call Trace: fbnic_tx_lso.isra.0+0x668/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 Allocated by task 8653: __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xcc/0x6c0 sock_alloc_send_pskb+0x327/0x3f0 __ip_append_data+0x188b/0x47a0 ip_make_skb+0x24a/0x300 udp_sendmsg+0x14d2/0x21e0 Freed by task 0: kfree+0x123/0x5a0 pskb_expand_head+0x36c/0xfa0 fbnic_tx_lso.isra.0+0x500/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 sch_direct_xmit+0x25b/0x1100 The buggy address belongs to the object at ff110000262edc40 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 344 bytes inside of freed 640-byte region [ff110000262edc40, ff110000262ede | ||||
| CVE-2026-72392 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: <TASK> fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table. | ||||
| CVE-2026-72391 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(), a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy() only unregisters the bus and clears sfp->i2c_mii without calling mdiobus_free(). As the only reference to the bus is then cleared, the struct mii_bus is leaked. This is hit whenever a copper/RollBall SFP module that instantiated an MDIO bus is removed: sfp_sm_main() takes the global teardown path and calls sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees sfp->i2c_mii directly, which is why the leak only triggered on module hot-removal and not on unbind. Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in sfp_i2c_mdiobus_create(). | ||||
| CVE-2026-72390 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF The teql master->slaves singly linked list is not protected against multiple writes. It can be mod'ed concurently from teql_master_xmit(), teql_dequeue(), teql_init() and teql_destroy() without holding any list lock or RCU protection. [email protected] has demonstrated that the qdisc is freed after an RCU grace period, but teql_master_xmit() running on another CPU can still hold a stale pointer into the list, resulting in a slab-use-after-free: BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0 Read of size 8 at addr ffff888013fb0440 by task poc/332 Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512) The fix? Add a per-master slaves_lock spinlock that serializes all mutations of master->slaves and the NEXT_SLAVE() links in teql_destroy() and teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock around those updates. Annotate master->slaves and the per-slave ->next pointer with __rcu and use the appropriate RCU accessors everywhere they are touched: rcu_assign_pointer() on the writer side (under slaves_lock), rcu_dereference_protected() for the writer-side loads (also under slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(), which run under RTNL. Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list traversal in teql_master_xmit(), so that readers either observe a fully linked list or are deferred until the in-flight mutation completes. The two early-return paths in teql_master_xmit() are updated to release the RCU-bh read-side critical section before returning, since leaving it held would disable BH on that CPU for good. | ||||
| CVE-2026-72389 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bridge: stp: Fix a potential use-after-free when deleting a bridge The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 | ||||
| CVE-2026-72388 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock Since dma_fence objects can be shared with other subsystems, they may be accessed from hardirq context in those drivers, and we have to take that into account by also using the IRQ-safe variant when acquiring the lock. While at it, switch to the guard model. | ||||
| CVE-2026-72387 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix potential invalid pointer deref in group_process_tiler_oom() If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid pointer. Make sure we set it to NULL in that case. | ||||
| CVE-2026-72386 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective. | ||||
| CVE-2026-72385 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry() fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of the per-ip fprobe list and fills it in a second walk, both under rcu_read_lock() only. A fprobe registered on an already-live ip can become visible between the two walks, so the fill walk processes an exit_handler the sizing walk did not count and used runs past reserved_words. If the sizing walk counted nothing, fgraph_data is NULL and the first write_fprobe_header() faults: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167 Call Trace: <TASK> function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677 ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671 __kernel_text_address+0x9/0x40 kernel/extable.c:78 arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26 kmem_cache_free+0x188/0x580 mm/slub.c:6378 tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590 [...] </TASK> The list cannot be frozen across the two walks, so skip a node that does not fit the reservation and count it as missed. | ||||
| CVE-2026-72384 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ts4800: Fix missing chained handler cleanup on remove The driver installs a chained handler for the parent interrupt during probe using irq_set_chained_handler_and_data(), but the remove function does not clear this handler. This leaves a dangling handler that may be called when the parent interrupt fires after the driver has been removed, potentially accessing freed memory and causing a kernel crash. Additionally, the parent_irq obtained via irq_of_parse_and_map() is not stored, making it inaccessible in the remove function. Moreover, interrupt mappings created during probe are not properly disposed. Fix this by: - Saving parent_irq in probe - Clearing the chained handler with NULL in ts4800_ic_remove() - Disposing all IRQ mappings before domain removal to prevent resource leaks | ||||
| CVE-2026-72383 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix addr_wq_timer race in sctp_free_addr_wq() sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete() while holding addr_wq_lock. However, timer_delete() does not guarantee that a currently running timer handler has completed. This allows a race with sctp_addr_wq_timeout_handler(), where the handler may still run after addr_waitq has been freed, acquire addr_wq_lock, and access freed memory, leading to a use-after-free. Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This guarantees that any in-flight timer handler has finished and prevents the timer from being re-armed during teardown, making subsequent cleanup safe. | ||||
| CVE-2026-72382 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject undersized DACLs before parsing ACEs parse_dacl() limits the attacker-controlled ACE count by comparing it with the number of minimal ACEs that fit in the DACL size. The DACL size field is 16 bits, but the expression subtracts sizeof(struct smb_acl). Because sizeof() is unsigned, a DACL size smaller than the ACL header underflows to a large size_t. A malicious client can reach this with: SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY) -> smb2_set_info_sec() -> set_info_sec() -> parse_sec_desc() -> parse_dacl() -> init_acl_state(..., 0xffff) -> init_acl_state(..., 0xffff) -> kmalloc_objs(..., 0xffff) Thus a malformed security descriptor can make num_aces pass the guard and drive large temporary ACL state and pointer-array allocations. Reject DACLs smaller than struct smb_acl before doing the subtraction, so the ACE count check cannot be bypassed by the underflow. | ||||
| CVE-2026-72381 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of fp->owner.name in durable handle owner check Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same persistent_id race the fp->owner.name compare-read in ksmbd_vfs_compare_durable_owner() against the kfree() in ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a standalone kstrdup() buffer whose lifetime is independent of the fp refcount, and the two sites share no lock: the compare reads the buffer while the reopen frees it, so the strcmp() can dereference freed memory. Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in ksmbd_reopen_durable_fd") made the fp->conn claim atomic under global_ft.lock (closing the owner.name double-free and the ksmbd_file write-UAF), but the compare-read versus reopen-free pair was left unserialized. BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80 Read of size 1 by task kworker strcmp ksmbd_vfs_compare_durable_owner smb2_check_durable_oplock smb2_open Freed by task kworker: kfree ksmbd_reopen_durable_fd smb2_open Allocated by task kworker: kstrdup session_fd_check smb2_session_logoff The buggy address belongs to the cache kmalloc-8 Serialize both sides of the race with fp->f_lock. The global durable file-table lock still protects the durable reconnect claim, but fp->owner.name is per-open state and does not need to block unrelated durable table lookups or reconnects. The teardown is left at its existing location after the reopen-success point so that an __open_id() rollback still retains owner.name for a later legitimate reconnect to verify. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72379 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid vfs_tmpfile() never checked that the caller's fsuid and fsgid map into the filesystem. On an idmapped mount whose idmapping does not cover the caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1. Every other creation path already refuses this: may_o_create() (O_CREAT) and may_create_dentry() (mkdir, mknod, symlink, link) bail out with -EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot be created with an owner the filesystem cannot represent. An O_TMPFILE is no exception: it is created I_LINKABLE and linkat(2) can splice it into the namespace afterwards, so the same guarantee must hold. Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a non-idmapped mount the caller's fs{u,g}id always map in the superblock's user namespace, so this is a no-op there and only takes effect on an idmapped mount that does not map the caller. It applies to every filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs, ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). | ||||
| CVE-2026-72378 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix error code in afs_extract_vl_addrs() The error codes on these paths are only set on the first iteration through the loop. Set the correct error code on every iteration. | ||||
| CVE-2026-72377 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files correctly use afs_file_aops which have release_folio set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them when fscache is enabled (set via afs_vnode_set_cache()). Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide a release_folio callback. However, afs_apply_status() unconditionally calls mapping_set_release_always() for these. In such case when memory management code attempts to release folios, filemap_release_folio() checks folio_needs_release() which returns true due to AS_RELEASE_ALWAYS being set. Since there is no release_folio callback, it falls through to try_to_free_buffers(), which at present expects buffer_heads to be not null. For symlinks and mountpoints without buffer_heads, this causes pointer dereference. [dh: Added more bits that were missed] | ||||
| CVE-2026-72376 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix misplaced inc of net->cells_outstanding Fix net->cells_outstanding being incremented before the check for failure of idr_alloc_cyclic(), leaving the count incremented on error. | ||||
| CVE-2026-72375 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running. | ||||
| CVE-2026-72374 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix callback service message parsers to pass through -EAGAIN The AFS filesystem client uses an rxrpc server to listen for callback notifications. Each callback call type handler has a delivery function that parses the incoming request stream, and this should return -EAGAIN the last packet hasn't yet been seen, but all currently queued received data is consumed. afs_extract_data() does this, but the -EAGAIN return is switched to 0 inadvertantly Fix callback service message parsers to pass through -EAGAIN | ||||