Export limit exceeded: 21872 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21872 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-1445 | 1 Cisco | 2 Adaptive Security Appliance Software, Secure Firewall Threat Defense | 2026-08-11 | 8.6 High |
| Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. | ||||
| CVE-2025-20182 | 1 Cisco | 2 Adaptive Security Appliance Software, Secure Firewall Threat Defense | 2026-08-11 | 8.6 High |
| A vulnerability in the Internet Key Exchange version 2 (IKEv2) protocol processing of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation when processing IKEv2 messages. An attacker could exploit this vulnerability by sending crafted IKEv2 traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition on the affected device. | ||||
| CVE-2024-20330 | 1 Cisco | 7 Firepower 2100, Firepower 2110, Firepower 2120 and 4 more | 2026-08-11 | 8.6 High |
| A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly. This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network. Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded. | ||||
| CVE-2023-20081 | 1 Cisco | 304 1100-4g Integrated Services Router, 1100-4p Integrated Services Router, 1100-6g Integrated Services Router and 301 more | 2026-08-11 | 6.8 Medium |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. | ||||
| CVE-2026-70335 | 1 Microsoft | 1 Visual Studio Code | 2026-08-11 | 7.8 High |
| Improper neutralization of special elements used in an os command ('os command injection') in GitHub Copilot and Visual Studio Code allows an unauthorized attacker to elevate privileges locally. | ||||
| CVE-2026-62817 | 1 Microsoft | 10 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 7 more | 2026-08-11 | 8.8 High |
| Out-of-bounds write in Windows DNS allows an unauthorized attacker to execute code over an adjacent network. | ||||
| CVE-2026-64191 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). | ||||
| CVE-2026-64608 | 1 Apache | 1 Fory | 2026-08-11 | 9.8 Critical |
| Heap type confusion and out-of-bounds read/write in the Apache Fory C++ implementation. When deserializing data in compatible mode, the field-skip paths do not correctly validate the declared field types against the actual data, so input with an inconsistent schema can cause type confusion and out-of-bounds memory access. Only the C++ implementation is affected; other language implementations of Apache Fory are not. This issue affects Apache Fory C++: from 0.14.0 before 1.4.0. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | ||||
| CVE-2026-72556 | 1 Zoneminder | 1 Zoneminder | 2026-08-11 | 8.8 High |
| A remote code execution vulnerability in ZoneMinder 1.39.17 allows any authenticated user to execute OS commands by exploiting a broken permission check in the Filter class. The canEdit() and canDelete() methods invoke nonexistent methods on the ZM\User class, causing PHP __call() to return a truthy value that bypasses the permission check for all users. Any authenticated user can trigger filter-based OS command execution regardless of their assigned role. | ||||
| CVE-2026-64217 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. | ||||
| CVE-2026-71990 | 1 Msi | 1 Radix Axe6600 | 2026-08-11 | 9.8 Critical |
| MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for SSH configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the SSH configuration interface to inject malicious commands and obtain root privileges on the underlying system. | ||||
| CVE-2026-23816 | 1 Hpe | 156 Aruba Cx 10000-48y6c \(r8p13a\), Aruba Cx 10000-48y6c \(r8p14a\), Aruba Cx 10000-48y6c \(s0f98a\) and 153 more | 2026-08-11 | 7.2 High |
| A vulnerability in the command line interface of AOS-CX Switches could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. | ||||
| CVE-2026-12052 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 5.2 Medium |
| The USB device-side CDC NCM class control-to-host handler usbd_cdc_ncm_cth in subsys/usb/device_next/class/usbd_cdc_ncm.c builds a fixed-size response for the GET_NTB_PARAMETERS (28-byte struct ntb_parameters) and GET_NTB_INPUT_SIZE (8-byte struct ntb_input_size) class requests and copies the whole structure into the control DATA IN buffer with net_buf_add_mem(buf, ..., sizeof(...)), ignoring the host-supplied wLength. The control DATA IN buffer is allocated by the USB stack with a capacity of exactly wLength bytes (usbd_ep_ctrl_data_in_alloc -> udc_ctrl_data_alloc -> net_buf_alloc_len(&udc_ep_pool, wLength); no round-up is applied for the IN endpoint). Because net_buf_add_mem/net_buf_simple_add only bounds the copy with an __ASSERT_NO_MSG, which is compiled out in production builds, a host that issues one of these standard CDC NCM control requests with a wLength smaller than the response structure (e.g. wLength = 1) causes the handler to memcpy up to 27 bytes past the end of the allocated pool buffer. The request fields come straight from the USB SETUP packet, so any host (or USB interposer) the Zephyr device enumerates against can trigger the overflow with no authentication once an image built with the device_next USB stack and the CDC NCM class is connected. The out-of-bounds write corrupts adjacent allocations and metadata in the shared udc_ep_pool, primarily causing memory corruption and denial of service of the USB stack; the overflow length is bounded (<= 27 bytes) and the written content is fixed device constants, and the bug reads nothing back so there is no information disclosure. The fix clamps the copy with MIN(sizeof(...), setup->wLength), matching the existing CDC ACM handler. | ||||
| CVE-2026-72603 | 1 Wg-easy | 1 Wg-easy | 2026-08-11 | 9.9 Critical |
| An OS command injection vulnerability in wg-easy 15.3.0 allows users with the clients.create permission to execute arbitrary commands as root by injecting newline-delimited WireGuard PostUp directives into the client name field. The client name is written to the WireGuard configuration file without neutralizing newline characters, allowing injection of arbitrary directives that are executed by wg-quick with root privileges. An attacker with clients.create permission achieves root code execution on the host. | ||||
| CVE-2026-72913 | 1 Kovidgoyal | 1 Kitty | 2026-08-11 | 7.8 High |
| Kitty is a cross-platform GPU based terminal. Prior to 0.48.2, the @kitty-echo and @kitty-ssh DCS handlers in kitty/window.py write unauthenticated data to the child shell's stdin, where handle_remote_echo accepts printable shell command characters and handle_remote_ssh calls get_ssh_data in kittens/ssh/utils.py, which emits a newline; chaining the handlers can execute attacker-controlled commands when a user displays untrusted terminal data. This issue is fixed in version 0.48.2. | ||||
| CVE-2026-59091 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2026-08-11 | 7.3 High |
| A flaw was found in GIMP's file format plugins, including those for PSD and PAA files. A remote attacker could exploit these vulnerabilities by tricking a user into opening a specially crafted image file. This could lead to unexpected application behavior or other potential security impacts without requiring further user interaction. | ||||
| CVE-2026-64097 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate GPIO pin LUT table size before iterating [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) | ||||
| CVE-2026-42055 | 2 F5, Redhat | 11 Dos, Nginx Gateway Fabric, Nginx Ingress Controller and 8 more | 2026-08-11 | 8.1 High |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-72767 | 1 N8n | 1 N8n | 2026-08-11 | N/A |
| n8n before 1.123.67, 2.x before 2.31.5, and 2.32.x before 2.32.1 contain a remote code execution vulnerability in the Git node. Authenticated users with rights to create and execute workflows can stage a crafted local repository that causes git to run hooks under default git security settings, executing arbitrary commands as the n8n process user. Both self-hosted and cloud instances are affected. | ||||
| CVE-2026-72880 | 1 Dokploy | 1 Dokploy | 2026-08-11 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the apiCreateCertificate schema in packages/server/src/db/schema/certificate.ts accepts a client-supplied certificatePath, and packages/server/src/services/certificate.ts joins that value to the certificate root without confinement. An authenticated user with certificate create or delete permission can use certificatePath to write attacker-controlled certificate content outside the intended directory or delete an out-of-root directory. This vulnerability is fixed in 0.29.13. | ||||