Export limit exceeded: 403658 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (403658 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98319 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not set, a drm_pending_vblank_event will be allocated. If later, there is an allocation failure or another failure at setup_out_fence(), that event will not have base.fence set and it will not be released at complete_signaling(). Release the event and set crtc_state->event to NULL just like in the DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at drm_event_reserve_init(). That is, prepare_signaling() releases the event and there is nothing to be done at complete_signaling(). Use drm_event_cancel_free() as that will also undo drm_event_reserve_init() in case it has been called. | ||||
| CVE-2026-98344 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix device kref underflow in dma_chan_put() dma_chan_get() takes chan->device->ref only on the slow path: /* no kref on fast path */ if (chan->client_count) { __module_get(owner); chan->client_count++; return 0; } if (!try_module_get(owner)) return -ENODEV; if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero() dma_chan_put() drops the ref unconditionally, so every fast-path get/put pair drops one extra device reference. The bug fires when two conditions hold together: a non-private provider has a persistent client holding chan->client_count > 0 and another client cycles dmaengine_get()/dmaengine_put(). When the kref hits zero, the subsequent dma_find_channel() returns NULL even though the provider module is still loaded. Fix this by dropping device->ref only on the last put, matching the single slow-path get. | ||||
| CVE-2026-98352 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED has already passed the DESTROYING check, it can take con_mutex, GET credits, and then lose the con to kfree. Device unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup(). Set a per-connection flag under con_mutex before CQ/QP teardown so a racing ADDR_RESOLVED cannot borrow credits after teardown has begun. | ||||
| CVE-2026-73078 | 1 Vim | 1 Vim | 2026-10-06 | 8.8 High |
| Vim is an open source, command line text editor. Prior to 9.2.0840, runtime/plugin/netrwPlugin.vim loads netrw and runtime/pack/dist/opt/netrw/autoload/netrw.vim constructs Bookmarks, History, and Targets menu entries by interpolating attacker-controlled directory paths into executed :menu commands. s:NetrwBookmarkMenu(), s:NetrwTgtMenu(), g:netrw_menu_escape, EX_TRLBAR, and netrw#MakeTgt() fail to neutralize the | command separator or single quotes at five construction sites, allowing a crafted path browsed or bookmarked in GUI Vim to execute arbitrary Ex and operating-system commands. This issue is fixed in version 9.2.0840. | ||||
| CVE-2026-9032 | 1 Tp-link | 2 Tapo C120 V1, Tapo C200 V5 | 2026-10-06 | N/A |
| Tapo C120 v1 and C200 v5 contain a NULL pointer dereference in the HTTPS onboarding connect request parser. The interface is reachable without authentication after initial setup and does not validate that a password field is present for certain authentication and encryption parameter combinations, allowing a malformed request from the same local network to crash the HTTPS service Successful exploitation may temporarily make HTTPS management functions unavailable. Repeated malformed requests may sustain the denial-of-service condition, and recovery may in some cases require a device reboot. | ||||
| CVE-2026-105764 | 1 Immich-app | 1 Immich | 2026-10-06 | N/A |
| Immich is a high-performance self-hosted photo and video management solution. Prior to 3.2.4, an authenticated non-admin user could upload SVG files that thumbnail-generation code in server/src/repositories/media.repository.ts passed to libvips. Files that bypassed libvips' native SVG loader fell through to ImageMagick, where attacker-controlled <image href> values reached unrestricted MSL and VIDEO coder operations. By storing one crafted asset and referencing its path from a second delayed-marker SVG, an attacker could execute code in the immich-server container when thumbnail processing ran. This issue is fixed in version 3.2.4. | ||||
| CVE-2026-104914 | 1 Misp | 1 Misp | 2026-10-06 | N/A |
| MISP contains an improper access control vulnerability in its attribute search and paginated attribute view endpoints. When a user queries for soft-deleted attributes (e.g., via the deleted-attributes search or the paginated attribute listing), the application returned soft-deleted attributes belonging to events owned by other organizations to any authenticated user who had visibility of the event. The event detail view correctly restricted soft-deleted attribute visibility to the owning organization and sync-permission users, but the attribute search and paginated view code paths lacked this restriction. Preconditions: - An authenticated MISP user with at least read access to an event owned by another organization. - The user issues a query for deleted attributes (search or paginated view with the deleted filter). Impact: - Confidentiality: Soft-deleted threat intelligence attributes (e.g., IOCs, indicators, context) from other organizations are disclosed to unauthorized users. This may expose sensitive intelligence that the owning organization intended to remove from general visibility. Affected versions: MISP versions prior to v2.5.48. | ||||
| CVE-2026-103957 | 1 Aws | 1 Loom | 2026-10-06 | 6.2 Medium |
| Server-side request forgery in the OAuth2 discovery handling in Loom for AWS before 1.7.0 might allow an authenticated remote user to obtain the access token of another user of the deployment and to cause the application to issue requests to arbitrary internal network locations, via a crafted discovery document address supplied when registering a tool server or remote agent configured for delegated authentication. To remediate this issue, users should upgrade to version 1.7.0 or later. | ||||
| CVE-2026-103446 | 1 Wikimedia | 1 Mediawiki-wikilambda Extension | 2026-10-06 | N/A |
| Authorization bypass through User-Controlled key vulnerability in The Wikimedia Foundation MediaWiki WikiLambda extension allows Authentication Bypass. This issue affects MediaWiki WikiLambda extension: 1.46. | ||||
| CVE-2026-98284 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been lockless since commit 21e4902aea80 ("netlink: Lockless lookup with RCU grace period in socket release"). Both can read a freed buffer, and sk_diag_dump_groups() can also read past the end of the old (smaller) buffer if it happens to load the old @groups pointer together with the new @ngroups value, copying the result into a NETLINK_DIAG_GROUPS attribute. This is the same class of bug that commit f773608026ee ("netlink: access nlk groups safely in netlink bind and getname") fixed for bind() and getname(); these two readers were missed. Simply grabbing the table lock in sk_diag_dump_groups() is not an option, because it is also called with nl_table_lock already held from the mc_list section of the dump. Make the lockless readers safe instead: - Allocate a new bitmap and free the old one after an RCU grace period, instead of relying on the implicit kfree() done by krealloc(). - Publish @groups before @ngroups, both with release semantics, and have the lockless readers load @ngroups first. A reader can then never pair the new (bigger) size with the old (smaller) buffer, and a reader picking up the new pointer while still seeing the old size is guaranteed to see the initialized bitmap. netlink_realloc_groups() is called from process context (bind() and setsockopt()), so kfree_rcu_mightsleep() can be used, once the table has been released. | ||||
| CVE-2026-98291 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the FRBD array access, allowing frbd_index == rxq->count to pass through and index one element past the end of the array. Change the check to >= rxq->count so every out-of-range index is rejected. This issue was reported by Claude Mythos. | ||||
| CVE-2026-102269 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 4.8 Medium |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-102270 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 4.4 Medium |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT is_pem_format is affected because lazy PEM regular expression backtracks extensively. This occurs when a certificate-like input contains repeated BEGIN markers without a matching END marker. As a result, is_pem_format performs unbounded backtracking while searching for a PEM end marker. Consequently, an attacker can cause intensive CPU consumption. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-64040 | 1 Linux | 1 Linux Kernel | 2026-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails. | ||||
| CVE-2026-102271 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 7.4 High |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.4.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because asymmetric-key guard relies on textual markers that are absent from DER encoding. This occurs when an application mixes HMAC and asymmetric algorithms and supplies a DER public key as the shared verification key. As a result, PyJWT uses public DER bytes as an HMAC secret. Consequently, an attacker who knows the public key can forge authenticated HMAC tokens. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-102272 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 7.4 High |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, HMACAlgorithm.prepare_key in jwt/algorithms.py is affected because raw-JWK detector does not normalize accepted Unicode byte-order marks before checking for JSON. This occurs when a public JWK is prefixed with a UTF-8 BOM and used in a mixed-algorithm verification path. As a result, public JWK bypasses asymmetric-key detection and becomes the HMAC secret. Consequently, an attacker who knows the public key can forge authenticated tokens. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-105922 | 1 Vllm-project | 1 Vllm | 2026-10-06 | 4.3 Medium |
| A security flaw has been discovered in vllm-project vLLM up to 0.31.0. This impacts the function get_token_bin_counts_and_mask of the file vllm/model_executor/layers/utils.py of the component Penalty Handler. Performing a manipulation results in denial of service. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-102273 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 7.4 High |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because HMAC key guard only recognizes top-level public JWK forms and misses container representations. This occurs when an application allows HMAC and asymmetric algorithms and passes a public JWK container as the raw key. As a result, public asymmetric key material is accepted as the HMAC secret. Consequently, an attacker who knows the public key can forge a token with arbitrary authenticated claims. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-102274 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 5.9 Medium |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.9.0 until 2.14.0, PyJWKSet does not catch the plain ValueError raised for malformed RSA JWK components by RSAAlgorithm.from_jwk in jwt/api_jwk.py. This occurs when a JWK Set contains a malformed RSA key alongside otherwise usable keys. As a result, one malformed member aborts construction of the entire PyJWKSet. Consequently, applications can experience authentication failures or request-level denial of service. This issue is fixed in version 2.14.0. | ||||
| CVE-2026-102275 | 2 Jpadilla, Pyjwt Project | 2 Pyjwt, Pyjwt | 2026-10-06 | 6.5 Medium |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.1.0 until 2.15.0, PyJWT OKPAlgorithm.from_jwk in jwt/algorithms.py is affected because private-JWK import path does not compare the public key derived from d with x. This occurs when an OKP private JWK supplies non-corresponding x and d components. As a result, identity derived from x can differ from operations performed with d. Consequently, if an integration also accepts private key parameters from a proof header without rejecting them, an attacker may use a stolen sender-constrained token without the legitimate private key. This issue is fixed in version 2.15.0. | ||||