Export limit exceeded: 370501 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370501 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370501 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64243 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-64232 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. | ||||
| CVE-2026-64223 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. | ||||
| CVE-2026-64222 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. | ||||
| CVE-2026-64221 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | ||||
| CVE-2026-64219 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) | ||||
| CVE-2026-64218 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. | ||||
| CVE-2026-64217 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. | ||||
| CVE-2026-64216 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies. | ||||
| CVE-2026-64210 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 | ||||
| CVE-2026-64206 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired. | ||||
| CVE-2026-64191 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). | ||||
| CVE-2026-64189 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-64188 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. | ||||
| CVE-2026-22557 | 1 Ubiquiti | 1 Unifi Network Application | 2026-07-27 | 10 Critical |
| A malicious actor with access to the network could exploit a Path Traversal vulnerability found in the UniFi Network Application to access files on the underlying system that could be manipulated to access an underlying account. | ||||
| CVE-2026-30689 | 1 Anjoy8 | 1 Blog.admin | 2026-07-27 | 4.3 Medium |
| In Blog.Core through bcb4d17, the getinfobytoken API interface contains improper access control that leads to sensitive data exposure. Unauthorized parties can obtain sensitive administrator account information via a valid token, threatening system security. NOTE: Blog.Admin is related front-end code that does not offer an API service. | ||||
| CVE-2026-64346 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine. | ||||
| CVE-2026-64227 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: driver: Check ACPI_COMPANION() against NULL during probe Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks against NULL to 13 platform drivers handling core ACPI devices. Also change the value returned by the ACPI thermal zone driver when the device's ACPI companion is not present to -ENODEV for consistency with the other drivers. | ||||
| CVE-2025-69624 | 3 Gonitro, Microsoft, Nitro | 3 Nitro Pdf Pro, Windows, Pdf Pro | 2026-07-27 | 7.5 High |
| Nitro PDF Pro before 14.43 for Windows contains a NULL pointer dereference vulnerability in the JavaScript implementation of app.alert(). When app.alert() is called with more than one argument and the first argument evaluates to null (for example, app.alert(app.activeDocs, true) when app.activeDocs is null), the engine routes the call through a fallback path intended for non-string arguments. In this path, js_ValueToString() is invoked on the null value and returns an invalid string pointer, which is then passed to JS_GetStringChars() without validation. Dereferencing this pointer leads to an access violation and application crash when opening a crafted PDF. For example, 14.41.1.4 and 14.42.0.34 have been reported as vulnerable. | ||||