Export limit exceeded: 383877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (383877 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74605 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately. | ||||
| CVE-2026-74608 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access. | ||||
| CVE-2026-74630 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent in6_dev_get() from resurrecting inet6_dev in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the caller. An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3) kernel reproduced the invalid reference acquisition as UID 1000: refcount_t: addition on 0; use-after-free. ip6_mc_source+0xef4/0x17e0 It was followed by the corresponding reference underflow in ip6_mc_source(). The supplied trace from the same unpatched revision additionally shows the access after the RCU read-side section ends: BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0 Write of size 8 at addr ffff888015b50240 by task poc/1219 Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. | ||||
| CVE-2026-74696 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen. | ||||
| CVE-2026-74720 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. | ||||
| CVE-2026-18728 | 1 Redhat | 2 Enterprise Linux, Open Iscsi | 2026-08-25 | 6.5 Medium |
| A flaw was found in open-iscsi. An integer underflow vulnerability in the `iscsiuio` component, specifically during IPv4 Dynamic Host Configuration Protocol (DHCP) parsing, allows a remote attacker on the same local network segment to cause a denial of service. By sending a specially crafted IPv4/UDP DHCP reply, the attacker can trigger an out-of-bounds read, leading to the `iscsiuio` process crashing. This issue affects systems where `iscsiuio` is actively handling IPv4 DHCP traffic. | ||||
| CVE-2026-0301 | 2 Palo Alto Networks, Paloaltonetworks | 6 Cloud Ngfw, Pan-os, Prisma Access and 3 more | 2026-08-25 | 7.5 High |
| An information disclosure vulnerability in the URL Filtering feature of Palo Alto Networks PAN-OS® software enables an unauthenticated user with network access to obtain sensitive information. Panorama is not impacted by this vulnerability. | ||||
| CVE-2026-74644 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: putback folios on invalid migrate nid damon_pa_migrate() and damos_va_migrate() isolate folios into a local list and then call damon_migrate_pages(). When target_nid is invalid (including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages() returns early without putting the folios back to the LRU. Callers then discard the list head while those folios remain isolated with an extra reference taken by folio_isolate_lru(). The pages stay off the LRU for as long as the mapping exists (anon active+inactive counts drop while RSS does not), and the leftover references can pin the pages after the mapping is gone. Put the folios back on the invalid-nid path so ignored migration requests still return them to the LRU. | ||||
| CVE-2026-74652 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ The RS485 trigger hrtimers are embedded in the devm-managed port and can fire after it is freed. The IRQ handler can arm a timer, so free the IRQ first and then cancel both timers. Complete the RS485 stop without arming a timer, and cancel the timers in remove() for the suspend-then-unbind path, where shutdown is not called. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-74672 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series has to deal with carefully. This mitigation resolves the issue by acquiring the mmap read lock on init_mm on vmap page table free if a ptdump is in progress. However the fix in this series would cause a deadlock if we were to simply apply it for arm64 without also reverting the change. This is because vmap may acquire the read lock before ptdump attempts to acquire the write lock, which then gets queued, and rwsem starvation rules mean that the (unacknowledged) nested mmap read lock in the arm64 code would also block, meaning the original read lock is never released and thus deadlock. This series works around this by #ifndef CONFIG_ARM64'ing the mmap read lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap support, and removing the ifdeffery with the partial revert patch. There are related issues that are also addressed in this series: * x86 page attribute logic, specifically Change Page Attributes (CPA), implements a feature whereby huge ranges can be collapsed into huge leaf entries. This can similarly cause a UAF when done in parallel with a ptdump walk, so similarly acquire the init_mm mmap lock to avoid this. * The CPA logic allows concurrent page table manipulation and CPA collapse, meaning the former risks accessing a page table the latter frees. Fix this by acquiring mmap write lock on init_mm across the whole CPA collapse operation and read lock on the page table manipulation. * x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm walks, and in x86's case arbitrary mm's), so we ensure kernel mappings remain stable by locking the init_mm as well as the mm being walked. The ordering of patches is established for both strict dependencies (the arm64 partial revert in particular has to be done after the vmap changes) and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA fixes are in place). This patch (of 3): Currently there is a nasty ra ---truncated--- | ||||
| CVE-2026-74678 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() When the interface has NETIF_F_SG enabled and skb_linearize() fails in ax88179_tx_fixup(), the function returns NULL without freeing the skb. usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop (info->flags does not set FLAG_MULTI_PACKET for this driver), jumping to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`. Because tx_fixup() returned NULL, the local skb variable in usbnet_start_xmit() is NULL, so the original skb is never freed — a memory leak on every TX frame whose linearization fails (i.e. under memory pressure). Free the skb before returning, matching the error handling already used for the pskb_expand_head() failure path in the same function. | ||||
| CVE-2026-63073 | 1 Openssl | 1 Openssl | 2026-08-25 | 5.9 Medium |
| Issue summary: OpenSSL CMP response validation passed an unexpected response sender distinguished name directly as the format string to `ERR_raise_data()`. Impact summary: A malicious or intercepted CMP endpoint can crash a CMP client that enforces an expected sender or uses a pinned server certificate whose subject becomes the default expected sender. CWE: CWE-134 (Use of Externally-Controlled Format String) Description: When validating a received CMP message, ossl_cmp_msg_check_update() converts the peer-supplied sender distinguished name with X509_NAME_oneline() and passes it directly as the format argument to ERR_raise_data(). Percent characters survive the conversion, so a sender DN such as "CN=%s%n" reaches BIO_vsnprintf() as an attacker-controlled format string with no matching variadic arguments. This path is only reached when the caller configures an expected sender or pins a server certificate, which is the normal configuration for a CMP client validating server responses. Since the attacker controls the format string but none of the variadic arguments, such specifiers as %s and %n dereference or write through unrelated stack contents and crash the client. The reliable consequence is a denial of service, when the response comes from a malicious or intercepted CMP endpoint. There is no controlled memory write, arbitrary-address read, or reliable path to remote code execution. FIPS impact: no No FIPS modules are affected by this issue, as the CMP protocol implementation is outside the OpenSSL FIPS module boundary. | ||||
| CVE-2026-2035366 | 2026-08-25 | 7.1 High | ||
| A flaw was found in OpenStack Keystone where an application credential token can escape its intended project scope through token-method reauthentication. Keystone rejects an explicit scope change for an application credential token, but an omitted scope falls through to the owner's default project. If the owner has roles on that default project, Keystone issues a new token scoped there while still carrying the original application credential identity. Custom Keystone authentication plugins are subject to the same incomplete rescope guard. This allows a limited-scope application credential for one project to access another project within the owner's role assignments. | ||||
| CVE-2024-9355 | 1 Redhat | 23 Amq Streams, Ansible Automation Platform, Container Native Virtualization and 20 more | 2026-08-25 | 6.5 Medium |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. | ||||
| CVE-2026-12993 | 1 Redhat | 2 Apicurio Registry, Build Of Apicurio Registry | 2026-08-25 | 6.5 Medium |
| A flaw was found in Apicurio Registry. The DocumentBuilderAccessor correctly blocks external DTD and schema access but does not disable DOCTYPE declarations or enable FEATURE_SECURE_PROCESSING. An attacker with artifact-write permission can upload XML documents with internal entity-expansion payloads (billion-laughs variant) that cause CPU and heap exhaustion, partially mitigated by the JAXP default 64,000 entity-expansion limit. | ||||
| CVE-2025-34290 | 2 Microsoft, Versa-networks | 2 Windows, Sase Client | 2026-08-25 | 7.8 High |
| Versa SASE Client for Windows versions released between 7.8.7 and 7.9.4 contain a local privilege escalation vulnerability in the audit log export functionality. The client communicates user-controlled file paths to a privileged service, which performs file system operations without impersonating the requesting user. Due to improper privilege handling and a time-of-check time-of-use race condition combined with symbolic link and mount point manipulation, a local authenticated attacker can coerce the service into deleting arbitrary directories with SYSTEM privileges. This can be exploited to delete protected system folders such as C:\\Config.msi and subsequently achieve execution as NT AUTHORITY\\SYSTEM via MSI rollback techniques. | ||||
| CVE-2026-74680 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed). | ||||
| CVE-2026-74682 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee <[email protected]> | ||||
| CVE-2026-74688 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. | ||||
| CVE-2026-74705 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free. | ||||