Export limit exceeded: 378307 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378307 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378307 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74431 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue. | ||||
| CVE-2026-74432 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not). | ||||
| CVE-2026-74438 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun4i-ss - Remove insecure and unused rng_alg Remove sun4i_ss_rng, as it is insecure and unused: - It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing locking and has a buffer overflow. sun4i_ss_prng_generate() fails to fill the entire buffer with cryptographic random bytes, because it rounds the destination length down and also doesn't actually wait for the hardware to be ready before pulling bytes from it. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen and discovered by Atuin - Automated Vulnerability Discovery Engine There's no point in fixing all these vulnerabilities individually when this is unused code, so let's just remove it. | ||||
| CVE-2026-74441 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix race condition and ordering in port unregistration A synchronization issue exists during port unregistration where pending partner work items can race against workqueue destruction, leading to use-after-free conditions: cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__queue_work+0x83/0x4a0 Call Trace: <IRQ> __cfi_delayed_work_timer_fn+0x10/0x10 run_timer_softirq+0x3b6/0xbd0 sched_clock_cpu+0xc/0x110 irq_exit_rcu+0x18d/0x330 fred_sysvec_apic_timer_interrupt+0x5e/0x80 Fix this by ensuring strict ordering and proper serialization during teardown: 1. Move ucsi_unregister_partner() to the beginning of the teardown sequence and protect it under the connector mutex lock. 2. Ensure all pending partner tasks are explicitly flushed and finished before the workqueue is destroyed. 3. Switch from mod_delayed_work() to a cancel_delayed_work() and queue_delayed_work() sequence. This guarantees that items currently marked as pending won't be scheduled an additional time, preventing a double release of resources which leads to the following crash: Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP NOPTI Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker RIP: 0010:ucsi_poll_worker+0x65/0x1e0 Call Trace: <TASK> process_scheduled_works+0x218/0x6d0 worker_thread+0x188/0x3f0 __cfi_worker_thread+0x10/0x10 kthread+0x226/0x2a0 To ensure these rules are applied identically across both the normal teardown and the ucsi_init() error paths, consolidate the cleanup logic into a new helper, ucsi_unregister_port(). | ||||
| CVE-2026-74442 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-74445 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | ||||
| CVE-2026-74451 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section. | ||||
| CVE-2026-74452 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size. | ||||
| CVE-2026-74453 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool. | ||||
| CVE-2026-19474 | 2026-08-15 | 7.5 High | ||
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | ||||
| CVE-2026-19895 | 1 Opensourcepos | 1 Open Source Point Of Sale | 2026-08-15 | 3.7 Low |
| A vulnerability was detected in opensourcepos Open Source Point of Sale up to 3.4.2. This affects the function Login::index of the file app/Config/Filters.php of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74364 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps as inner maps in map-in-map An exclusive map (created with excl_prog_hash) is bound to a single program by hash: check_map_prog_compatibility() refuses to load any program whose digest does not match map->excl_prog_sha. That check only runs for maps a program references directly, i.e. its used_maps. A map reached at runtime through a map-of-maps is never in used_maps, and bpf_map_meta_equal() does not consider excl_prog_sha, so an exclusive map can be inserted into a non-exclusive outer map and then looked up and mutated by an unrelated program, bypassing the exclusivity guarantee. For the signed loader this defeats the metadata map exclusivity check added in the signed loader: the cached map->sha[] is validated against the signed hash while another program on a hostile host rewrites the frozen map's contents through the outer map. | ||||
| CVE-2026-74368 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the NWIFI header length is invalid, causing the function to abort early with -EINVAL. When this happens, the error propagates to ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it to NULL. As a result, the corresponding MSDU is no longer referenced by the defragmentation path and is never freed. This leads to a memory leak for the affected MSDU on this error path. Proper cleanup is required to ensure the MSDU is released when header validation fails during TKIP MIC verification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74369 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish() In luo_file_unpreserve_files() and luo_file_finish(), reorder module_put() and xa_erase() to ensure the file handler module remains pinned while its operations are being accessed. Specifically, luo_get_id() dereferences fh->ops->get_id, so the module reference must be held until after xa_erase() (which calls luo_get_id) completes. For luo_file_finish(), this requires moving the module_put() call out of the luo_file_finish_one() helper and into the main loop of luo_file_finish() itself. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||
| CVE-2026-74376 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: reset read_slot when reusing r10bio for discard put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. | ||||
| CVE-2026-74379 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dax/kmem: account for partial discontiguous resource upon removal When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed. | ||||
| CVE-2026-74381 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Allow entries in BO caches to be freed When a buffer object is pinned via host1x_bo_pin() with a cache, the resulting mapping is kept in the cache so it can be reused on subsequent pins. Each mapping held a reference to the underlying host1x_bo (taken in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached, the bo itself could not be freed. However, the only way to remove the cached mapping was through the free path of the buffer object. This meant that if a bo got cached, it could never get freed again. Resolve the circularity by holding a weak reference to the bo from the cache side. This is done by having the .pin callbacks not bump the bo's refcount -- instead the common Host1x bo code does so, except for the cache reference. Also move the remove-cache-mapping-on-free code into a common function inside Host1x code. This is only called from the TegraDRM GEM buffers since those are the only ones that can be cached at the moment. | ||||