Export limit exceeded: 362599 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (362599 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53350 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: wm_adsp: Fix NULL dereference when removing firmware controls In wm_adsp_control_remove() check that the priv pointer is not NULL before attempting to cleanup what it points to. When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that wm_adsp can create its own private control data. There are two cases where private data is not created: 1. The control is a SYSTEM control, so an ALSA control is not created. 2. The codec driver has registered a control_add() callback that hides the control, so wm_adsp_control_add() is not called. When cs_dsp_remove destroys its control list it calls wm_adsp_control_remove() for each control. But wm_adsp_control_remove() was attempting to cleanup the private data pointed to by cs_ctl->priv without checking the pointer for NULL. | ||||
| CVE-2026-53349 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: destroy stale expectfn expectations on unregister NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops. | ||||
| CVE-2026-53348 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: fix NULL pointer dereference in sdca_dev_unregister_functions sdca_dev_unregister_functions() iterates over all SDCA function descriptors and calls sdca_dev_unregister() on each func_dev without checking for NULL. When a function registration has failed partway through, or the device cleanup races with probe deferral, func_dev entries may be NULL, leading to a kernel oops: BUG: kernel NULL pointer dereference, address: 0000000000000040 RIP: 0010:device_del+0x1e/0x3e0 Call Trace: sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca] release_nodes+0x35/0xb0 devres_release_all+0x90/0x100 device_unbind_cleanup+0xe/0x80 device_release_driver_internal+0x1c1/0x200 bus_remove_device+0xc6/0x130 device_del+0x161/0x3e0 device_unregister+0x17/0x60 sdw_delete_slave+0xb6/0xd0 [soundwire_bus] sdw_bus_master_delete+0x1e/0x50 [soundwire_bus] ... sof_probe_work+0x19/0x30 [snd_sof] This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake) with the SOF audio driver probe failing due to missing Panther Lake firmware, causing the subsequent cleanup of SoundWire devices to trigger the crash. Fix this with three changes: 1) Add a NULL guard in sdca_dev_unregister() so that callers do not need to pre-validate the pointer (defense in depth). 2) In sdca_dev_unregister_functions(), skip NULL func_dev entries and clear func_dev to NULL after unregistration, making the function idempotent and safe against double-invocation. 3) In sdca_dev_register_functions(), roll back all previously registered functions when a later one fails, so the function array is never left in a partially-populated state. | ||||
| CVE-2026-53347 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix driver removal with disabled KMS DRM atomic and modesetting aren't initialized if virtio-gpu driver built with disabled KMS, leading to access of uninitialized data on driver removal/unbinding and crashing kernel. Fix it by skipping shutting down atomic core with unavailable KMS. | ||||
| CVE-2026-53346 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the uwtable annotation for functions, but not for the module. This means that compiler-generated functions such as 'asan.module_ctor' do not receive the uwtable annotation. When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot failures because the dwarf information emitted for the kasan constructors is wrong, which causes the SCS boot patching code to patch the constructor in an illegal manner. Specifically, the paciasp instruction is patched, but the autiasp instruction is not. This mismatch leads to a crash when the constructor is called during boot. ================================================================== BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90 Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1 Specifically the faulting instruction is the (*fn)() to invoke the constructor in do_ctors() of the init/main.c file. Once the fix lands in rustc, this flag can be made conditional on the rustc version. Note that passing the flag on a rustc with the fix present has no effect. [ The fix [1] has landed for Rust 1.98.0 (expected release on 2026-08-20). Thus add a version check as discussed. - Miguel ] [ Adjusted link and comment. - Miguel ] | ||||
| CVE-2026-53345 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. | ||||
| CVE-2026-53344 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init Regmap initialization triggers regcache_maple_populate() which attempts SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to be set, without them, NULL pointer dereference occurs during probe. Move initialization before mcp23s08_spi_regmap_init() call. | ||||
| CVE-2026-53343 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in __switch_to(). The read uses ldr, but the KASAN shadow address is byte-granular and is not guaranteed to be word aligned. ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to() with an alignment exception before reaching init. Use ldrb for the dummy shadow access. The code only needs to fault in the shadow mapping if the stack shadow is missing, so a byte load is sufficient and matches the granularity of KASAN shadow memory. | ||||
| CVE-2026-53342 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mm: call pagetable dtor when freeing hot-removed page tables Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in __create_pgd_mapping()") page-table allocation on ARM64 always calls pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However the matching pagetable_dtor() calls were never added. With DEBUG_VM enabled on kernel versions prior to v6.17 without 2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type") this leads to the following warning when freeing these pages due to page->page_type sharing page->_mapcount: BUG: Bad page state in process ... pfn:284fbb page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff) page_type: f2(table) page dumped because: nonzero mapcount Call trace: bad_page+0x13c/0x160 __free_frozen_pages+0x6cc/0x860 ___free_pages+0xf4/0x180 free_pages+0x54/0x80 free_hotplug_page_range.part.0+0x58/0x90 free_empty_tables+0x438/0x500 __remove_pgd_mapping.constprop.0+0x60/0xa8 arch_remove_memory+0x48/0x80 try_remove_memory+0x158/0x1d8 offline_and_remove_memory+0x138/0x180 It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is defined and incorrect NR_PAGETABLE stats. Fix this by calling pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page to undo the effects of calling pagetable_*_ctor(). | ||||
| CVE-2026-53341 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh() may_decode_fh() accesses mount::mnt_ns without holding any locks; that means the mount can concurrently be unmounted, and the mnt_namespace can concurrently be freed after an RCU grace period. This race can happens as follows, assuming that the mount point was created by open_tree(..., OPEN_TREE_CLONE): thread 1 thread 2 RCU __do_sys_open_by_handle_at do_handle_open handle_to_path may_decode_fh is_mounted [mount::mnt_ns access] [mount::mnt_ns access] __do_sys_close fput_close_sync __fput dissolve_on_fput umount_tree class_namespace_excl_destructor namespace_unlock free_mnt_ns mnt_ns_tree_remove call_rcu(mnt_ns_release_rcu) mnt_ns_release_rcu mnt_ns_release kfree [mnt_namespace::user_ns access] **UAF** Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like in __prepend_path(). Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE() for writers that can race with lockless readers. This bug is unreachable unless one of the following is set: - CONFIG_PREEMPTION - CONFIG_RCU_STRICT_GRACE_PERIOD because it requires an RCU grace period to happen during a syscall without an explicit preemption. This doesn't seem to have interesting security impact; worst-case, it could leak the result of an integer comparison to userspace (from the level check in cap_capable()), cause an endless loop, or crash the kernel by dereferencing an invalid address. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-53339 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] .... | ||||
| CVE-2026-53338 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues() of_reserved_mem_lookup() may return NULL if the reserved memory region referenced by the "memory-region" phandle is not found in the reserved memory table (e.g. due to a misconfigured DTS or a removed memory-region node). The current code dereferences the returned pointer without checking for NULL, leading to a kernel NULL pointer dereference at the following lines: dma_addr = rmem->base; // line 1156 num_desc = div_u64(rmem->size, buf_size); // line 1160 Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if the lookup fails, which is consistent with the existing error handling for of_parse_phandle() failure in the same code block. | ||||
| CVE-2026-53337 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL pointer dereference in bond_do_ioctl() In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check. | ||||
| CVE-2026-53336 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop. | ||||
| CVE-2026-53335 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: handle ctx allocation failure DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init function. damon_lru_sort_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | ||||
| CVE-2026-53334 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | ||||
| CVE-2026-53333 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path. | ||||
| CVE-2026-53332 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. | ||||
| CVE-2026-53331 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | ||||