Export limit exceeded: 376227 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376227 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19347 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-11 | 6.3 Medium |
| A vulnerability was identified in itsourcecode Hospital Management System 1.0. This issue affects some unknown processing of the file /viewdoctor.php. Such manipulation of the argument delid leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-19342 | 1 Code-projects | 1 Task Management System | 2026-08-11 | 7.3 High |
| A vulnerability was detected in code-projects Task Management System 1.0. Affected is an unknown function of the file /index.php of the component Login. Performing a manipulation of the argument Password results in improper authentication. The attack is possible to be carried out remotely. The exploit is now public and may be used. | ||||
| CVE-2026-68085 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush. | ||||
| CVE-2026-68363 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened. | ||||
| CVE-2026-68368 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary. | ||||
| CVE-2026-68370 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the "emulated single-request FIFO" fast-path in dummy_queue() reuses for small IN transfers: it copies the caller's request into it (req->req = *_req) and queues it, treating list_empty(&fifo_req.queue) as "the slot is free". The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows the standard pattern: list_del_init(&req->queue) unlinks the request, then the lock is dropped and usb_gadget_giveback_request() invokes req->complete(). But list_del_init() makes fifo_req.queue look empty *before* the completion callback returns, so a concurrent dummy_queue() on another CPU sees the slot as free, reuses fifo_req and runs req->req = *_req -- overwriting req->complete while dummy_timer is mid-calling it. The indirect call then jumps to a clobbered pointer, causing a general protection fault / page fault in dummy_timer (syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an in-bounds memcpy on a live shared object, so KASAN cannot flag it. Add a fifo_req_busy bit covering the shared request's whole lifetime: set it in dummy_queue() when the FIFO fast-path takes fifo_req (making it the fast-path guard, replacing the list_empty(&fifo_req.queue) test), and clear it after the completion callback has returned, via a dummy_giveback() helper used at all four gadget-request giveback sites. The shared slot can no longer be reused until its completion callback has finished. | ||||
| CVE-2026-68376 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_hmacs array size in struct sctp_cookie The auth_hmacs array in struct sctp_cookie is supposed to store a complete SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr followed by N HMAC identifiers. However, the array size was calculated using an extra 2 bytes instead of sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers are configured, the HMAC-ALGO parameter stored in the endpoint is larger than the auth_hmacs buffer in the cookie. As a result, sctp_association_init() copies beyond the end of auth_hmacs when initializing the association, corrupting the adjacent auth_chunks field. This can lead to an invalid HMAC identifier being accepted and later cause an out-of-bounds read in sctp_auth_get_hmac(). Fix the array size calculation by including the full SCTP parameter header size. | ||||
| CVE-2026-68423 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy(). | ||||
| CVE-2026-68428 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Fix use-after-free on vendor module reload mmu_destroy_caches() destroys pte_list_desc_cache and mmu_page_header_cache, but leaves both pointers unchanged. The pointers live in kvm.ko, and therefore survive when a vendor module is unloaded while kvm.ko remains loaded. If creation of pte_list_desc_cache fails during a subsequent vendor module load, its assignment sets pte_list_desc_cache to NULL and the error path calls mmu_destroy_caches(). mmu_page_header_cache still points to the cache destroyed during the preceding vendor module unload. Passing that stale pointer to kmem_cache_destroy() causes a slab use-after-free. Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y, CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A one-shot test hook forces pte_list_desc_cache to NULL on the second invocation of kvm_mmu_vendor_module_init(): 1. Load kvm.ko and kvm-intel.ko, creating both caches. 2. Unload only kvm_intel, leaving kvm.ko loaded. 3. Reload kvm_intel and force initialization through the -ENOMEM path. KASAN reports: BUG: KASAN: slab-use-after-free in kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... kmem_cache_destroy+0x21/0x1d0 kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... Allocated by task 16817: __kmem_cache_create_args+0x12c/0x3b0 __kmem_cache_create.constprop.0+0xb6/0xf0 [kvm] kvm_mmu_vendor_module_init+0x13b/0x170 [kvm] ... Freed by task 16820: kmem_cache_destroy+0x117/0x1d0 kvm_mmu_vendor_module_exit+0x21/0x30 [kvm] Clear both pointers immediately after destroying their caches so that the stored state reflects the caches' lifetime and repeated cleanup is safe. With the fix applied, the same injected vendor module reload fails with -ENOMEM as expected and produces no KASAN report. | ||||
| CVE-2026-11812 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 2.5 Low |
| The UpdateHub management subsystem (subsys/mgmt/updatehub/updatehub.c) drives every update operation through a single file-scope ctx structure that holds the CoAP block context, payload buffer, status code, socket, and a one-element poll-fd array fds[1]. Access to ctx was not serialized, and prepare_fds() wrote ctx.fds[ctx.nfds] and incremented ctx.nfds with no bounds check. Two independent paths mutate ctx concurrently: the background autohandler running on the system workqueue, and user-triggered operations reached through the updatehub run shell command, direct API calls, or — since the operations are exposed as syscalls — userspace threads. When a second flow enters prepare_fds() while ctx.nfds is already 1, the write lands one element past the array; by struct layout it overlaps the adjacent ctx.sock/ctx.nfds members. More broadly, the unsynchronized sharing lets two flows interleave connection setup and teardown, double-closing a socket descriptor or scribbling the shared buffers. The result is corruption of the update subsystem's internal state and denial of service of the firmware-update path; the out-of-bounds write is contained within the ctx structure and there is no demonstrated path to memory outside it or to code execution. Triggering requires a local actor able to invoke update operations (or, with CONFIG_USERSPACE, an unprivileged userspace thread) and to win a timing race against the background handler; remote peers cannot control the race timing. The fix serializes the entry points with a mutex and adds a bounds check to prepare_fds(). | ||||
| CVE-2026-19337 | 1 Adenot | 1 Mcp-google-search | 2026-08-11 | 5.3 Medium |
| A vulnerability was determined in adenot mcp-google-search up to 0.3.1. Impacted is an unknown function of the file src/index.ts of the component read_webpage. Executing a manipulation of the argument url can lead to server-side request forgery. The attack is restricted to local execution. This patch is called f071d491b685011ca04e8ab8d586fc65f86bcee1. It is advisable to implement a patch to correct this issue. | ||||
| CVE-2026-19332 | 1 Nellyw8 | 1 Mcp4eda | 2026-08-11 | 5.3 Medium |
| A security vulnerability has been detected in NellyW8 MCP4EDA 1.0.0. Affected by this vulnerability is an unknown functionality of the component run_openlane/view_waveform. The manipulation of the argument design_name/vcd_file leads to command injection. Local access is required to approach this attack. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19327 | 1 Abracadabra50 | 1 Claude-sesh | 2026-08-11 | 5.3 Medium |
| A flaw has been found in abracadabra50 claude-sesh 1.0.0. This issue affects the function getEnrichedData/enrichSession of the file src/services/enricher.ts. Executing a manipulation of the argument sessionId can lead to path traversal. The attack needs to be launched locally. This patch is called 786c9d74800e6d0858b65778f31beb71b3983a50. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-71954 | 1 D-link | 1 Dwr-m961 | 2026-08-11 | 9.8 Critical |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formL2tpv3ConfigSetup interface. A remote attacker can inject arbitrary malicious commands into the tunnelid and sessionid fields, resulting in command execution with root privileges. | ||||
| CVE-2026-71949 | 1 D-link | 1 Dwr-m961 | 2026-08-11 | 9.8 Critical |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formUSSDSetup interface. A remote attacker can inject arbitrary malicious commands into the ussdValue and selectMenuValue fields, resulting in command execution with root privileges. | ||||
| CVE-2026-71944 | 1 D-link | 1 Dwr-m961 | 2026-08-11 | 9.8 Critical |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formLtefotaUpgradeQuectel interface. A remote attacker can inject arbitrary malicious commands into the fota_url field, resulting in command execution with root privileges. | ||||
| CVE-2026-68092 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: time/jiffies: Register jiffies clocksource before usage Teddy reported that a XEN HVM has a long boot delay, which was bisected to the recent enhancements to the negative motion detection. It turned out that the jiffies clocksource is used in early boot before it is registered, which leaves the max_delta_raw field at zero. That causes the read out to be clamped to the max delta of 0, which means time is not making progress. Cure it by ensuring that it is initialized before its first usage in timekeeping_init(). | ||||
| CVE-2026-68377 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. [email protected] produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168 Write of size 4 at addr ffff88806158de40 by task poc/9388 CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy) Tainted: [W]=WARN Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 kasan_check_range+0x125/0x200 mm/kasan/generic.c:200 instrument_atomic_read_write include/linux/instrumented.h:112 atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 __rcuref_put include/linux/rcuref.h:109 rcuref_put include/linux/rcuref.h:173 dst_release+0x5b/0x370 net/core/dst.c:168 refdst_drop include/net/dst.h:272 skb_dst_drop include/net/dst.h:284 skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163 skb_release_all net/core/skbuff.c:1187 [..] Allocated by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 __kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 __do_kmalloc_node mm/slub.c:5296 __kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 kzalloc_noprof include/linux/slab.h:1188 offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35 tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 [..] Freed by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 __kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 slab_free_hook mm/slub.c:2689 slab_free mm/slub.c:6251 kfree+0x21f/0x6b0 mm/slub.c:6566 tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 The buggy address belongs to the object at ffff88806158de00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff88806158de00, ffff88806158df00) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c head: order:1 mapcount:0 entire_map ---truncated--- | ||||
| CVE-2026-68382 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) | ||||
| CVE-2026-68400 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint memory access array and to comply with the FF-A spec instead of defaulting to `sizeof(struct ffa_mem_region)`. This requires moving `ffa_mem_region_additional_setup()` earlier in the setup flow. Also, add sanity checks to ensure the calculated descriptor offsets do not exceed `max_fragsize`. | ||||