Export limit exceeded: 376174 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376174 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-11940 | 1 Python | 1 Cpython | 2026-08-11 | N/A |
| tarfile.extractall() with the 'data' or 'tar' filter could be bypassed by a crafted archive where a hardlink references a symlink stored at a deeper name than the hardlink itself. The extraction fallback validated the symlink at it's archived location but recreated it at the hardlink's shallower path, letting a relative target the filter judged contained escape the destination directory. This allowed a malicious tar archive to create a symlink pointing outside the destination, enabling out-of-destination file reads or writes. This was an incomplete fix of CVE-2025-4330. | ||||
| CVE-2026-12003 | 1 Python | 1 Cpython | 2026-08-11 | N/A |
| To allow builds of Python to be run from an in-tree layout (rather than an installed file layout), the VPATH variable is defined at build time and used to locate certain landmarks - specifically, Modules/setup.local. When this landmark is found relative to VPATH relative to the executable, Python assumes it is running in a source tree and generates a different default sys.path. This code remains in release builds, so that release-ready builds can be built in-tree. On Windows, since builds are written to 'PCbuild/', the value of VPATH is set to '..\..', which results in a landmark of '..\..\Modules\setup.local'. This path is outside the install directory of Python, and may have different permissions, potentially allowing a low-privilege user to create the landmark and an alternative `Lib` folder that will be discovered by an otherwise restricted install. Such a setup occurs with the legacy default install location for all users (in the now superseded EXE installer), due to how Windows allows all users to create folders in the root directory of their OS drive. Our recommended mitigation on Windows is to migrate away from the legacy installer and use the new [Python install manager](https://www.python.org/downloads/latest/pymanager/) to install for the current user. Installs where the directory two levels above the Python installation directory have equivalent permissions are unaffected (in general, a per-user install cannot be modified at all by other users, removing any escalation of privilege risk, and could be directly modified by a privileged user, making the potential tampering irrelevant). Alternative mitigations might include preemptively creating and restricting access to a `Modules` directory. Be aware that only 3.13 and 3.14 will receive updated legacy installers - earlier fixes are only provided as sources. Platforms other than Windows allow VPATH to be overridden, but as they don't usually use a separated directory in the build for binaries, are unlikely to have a landmark reference outside of the install directory. The landmark detection involving VPATH is a fallback for when a more specific landmark - .\pybuilddir.txt - is absent, and was included for compatibility. Future releases of Python will no longer include the fallback, and so builds will need to generate or preserve the pybuilddir.txt file in order to work in-tree. This landmark file has been generated on Windows since 3.11, and on other platforms for longer. | ||||
| CVE-2026-15308 | 1 Python | 2 Cpython, Python | 2026-08-11 | 7.5 High |
| The incremental HTML parser (html.parser.HTMLParser) allows for CPU denial-of-service through repeated unterminated markup declarations when processing uncontrolled data. | ||||
| CVE-2026-3276 | 1 Python | 1 Cpython | 2026-08-11 | 5.3 Medium |
| unicodedata.normalize() can take excessive CPU time when processing specially crafted Unicode input containing long runs of combining characters with alternating Canonical Combining Class values. This affects all normalization forms. | ||||
| CVE-2026-6879 | 2 Python, Redhat | 2 Cpython, Hummingbird | 2026-08-11 | 2.2 Low |
| `Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end of the sibling list, such as with `[last()]` or `[last()-N]`; `.//item[1]` short-circuits after the first match. | ||||
| CVE-2026-9669 | 1 Python | 1 Cpython | 2026-08-11 | 5.9 Medium |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. | ||||
| CVE-2026-68373 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x-usb: avoid length underflow in at76_guess_freq() at76_guess_freq() checks only that the received frame is at least a bare 802.11 header (24 bytes) before subtracting the fixed management-body offset: len -= el_off; For both beacon and probe response frames, el_off is 36. If the frame is shorter than el_off, subtracting it causes the calculated IE length to wrap. The length is eventually passed to cfg80211_find_elem_match() as a very large unsigned value, so the element walk runs beyond the RX skb. This path is reached from at76_rx_tasklet() while scanning. If the device delivers a truncated beacon or probe response, the oversized IE length causes an out-of-bounds read during scanning. Skip the IE lookup if the frame does not reach the variable elements, before subtracting el_off. | ||||
| CVE-2026-68384 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) | ||||
| CVE-2026-68385 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/checksum: Fix csum_partial() without vector facility Currently csum_partial() calls csum_copy() with copy=false and dst=NULL. On machines without the vector facility, csum_copy() falls back to cksm(dst, ...), causing the checksum to be calculated from address zero instead of the source buffer. The VX implementation already checksums data loaded from src. Make the fallback do the same by passing src to cksm(). | ||||
| CVE-2026-68394 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter update changes an existing LE central connection. The queued work currently stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later LOAD_CONN_PARAM request can clear disabled parameters and free that entry before hci_cmd_sync_work() runs the queued callback. Do not keep the borrowed hci_conn_params pointer in queued work. Queue the hci_conn instead and hold a reference until the queued callback completes. When the work runs, revalidate that the connection is still present, look up the current hci_conn_params entry, and cancel the update if userspace removed that entry while the work was pending. Copy the interval values from the current params entry under hdev->lock, then drop the lock and keep using hci_le_conn_update_sync() to issue the update. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth] Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 kasan_report+0xe0/0x110 conn_update_sync+0x2a/0xf0 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Allocated by task 466: hci_conn_params_add+0xa6/0x240 [bluetooth] load_conn_param+0x4e1/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] Freed by task 474: kfree+0x313/0x590 hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth] load_conn_param+0x4bf/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] | ||||
| CVE-2026-68396 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. | ||||
| CVE-2026-68398 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path: l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv() -> ppp_input(&po->chan) It runs under rcu_read_lock() holding only an l2tp_session reference and takes NO reference on the internal PPP channel (struct channel, chan->ppp) that ppp_input() dereferences. The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel are RCU-safe. But the internal struct channel is a separate allocation that ppp_release_channel() frees with a plain kfree(): close(data socket) -> pppol2tp_release() -> pppox_unbind_sock() -> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch) For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit (no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips both ppp_disconnect_channel()'s synchronize_net() and ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace period. rcu_read_lock() in pppol2tp_recv() does not protect against a plain kfree(), so an in-flight ppp_input() on one CPU can dereference the channel just freed by close() on another CPU. The bug is reachable by an unprivileged user. Defer the channel free to an RCU callback via call_rcu() so the grace period fences any in-flight ppp_input(). The disconnect and unbridge teardown paths already fence with synchronize_net()/synchronize_rcu(); call_rcu() does the same here without stalling the close() path. | ||||
| CVE-2026-34909 | 2 Ubiquiti, Ui | 94 Efg, Envr, Envr-core and 91 more | 2026-08-11 | 10 Critical |
| A malicious actor with access to the network could exploit a Path Traversal vulnerability found in UniFi OS devices to access files on the underlying system that could be manipulated to access an underlying account. | ||||
| CVE-2026-68307 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link. | ||||
| CVE-2026-68364 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix ISM dc_lock deadlock during suspend [Why] System hang observed during suspend/resume while video is playing. amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM delayed work via disable_delayed_work_sync(). The work handlers themselves take dc_lock, producing an ABBA deadlock when a worker is in flight at suspend time. [How] Split the disable path into two phases with opposite locking contracts: 1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold dc_lock. 2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM back to FULL_POWER_RUNNING, must hold dc_lock. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-68367 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-68387 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: raw: add locking for raw flags bitfield With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") the formerly separate integer values have been integrated into a single bitfield. This led to a read-modify-write operation when changing a flag in raw_setsockopt() which now needs a locking to prevent concurrent access. Instead of adding a lock/unlock hell in each of the flag manipulations this patch introduces a wrapper for a new raw_setsockopt_locked() function analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c [mkl: use Closes tag instead of Link] | ||||
| CVE-2026-68388 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. | ||||
| CVE-2026-68390 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups hci_conn_params_lookup requires hdev->lock be held, otherwise the list iteration or param access is not safe. Hold hdev->lock for params lookups in hci_sync. | ||||