Export limit exceeded: 11010 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11010 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88840 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-26 | 5.3 Medium |
| BusyBox TLS get_client_hello() reads past the end of the input buffer when parsing a truncated ClientHello message. | ||||
| CVE-2026-93682 | 2 Php Group, Redhat | 2 Php, Hummingbird | 2026-09-26 | 5.8 Medium |
| When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect target is built, so a malicious server controls whether the client is sent to the host root or to the current directory. | ||||
| CVE-2026-93213 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(end - 1)) before checking end > start and so reads one byte before the property name when the name is empty or all digits. Check the bound first. | ||||
| CVE-2026-98053 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Refactor and fix init_config access Existing code accesses enties found in ->init_configs array through indexes that are part of ->config_ids array. Those two are limited by: ->num_init_configs and ->num_config_ids respectively. Using ID larger or equal to ->num_init_configs leads to out-of-bounds access: avs_path_module_send_init_configs() loop: (...) &acomp->tplg->init_configs[ids[i]] ^ out-of-bounds candidate Rather than adding another if-statement, refactor the code. There is no need to store the IDs, have a list of pointers to actual config-entries instead. As the verification of ->init_config entries does not differ from verification of other types that are part of the topology.c file, simply reuse the code. | ||||
| CVE-2026-97428 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: harden FRU PIA parsing with bounded helpers Replace the open-coded TLV walk with fru_pia_advance() and fru_pia_copy_field() helpers that bound every read by the actual EEPROM data length, preventing out-of-bounds reads on truncated or malformed FRU data. | ||||
| CVE-2026-97433 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: validate FDP configuration descriptor sizes Validate descriptor sizes while walking the FDP configurations log so dsze == 0 or a descriptor past the log end cannot cause unbounded iteration or reads past the buffer. | ||||
| CVE-2026-97976 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate packet_len before skb_put_data btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without checking if it exceeds the RX buffer size. An oversized packet_len can lead to an out-of-bounds read in skb_put_data(). Validate packet_len to ensure it is non-zero and does not exceed BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when invalid. This issue was reported by Claude Mythos. It can be simulated either by using customized firmware configured to return an invalid packet_len or by modifying rfh_hdr->packet_len in the driver before calling btintel_pcie_submit_rx_work(). | ||||
| CVE-2026-88835 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.1 Medium |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-75656 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 5.5 Medium |
| Bridge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-97614 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_brcm: legacy FCS: request needed tailroom The legacy FCS tagger calculates the CRC over skb->len bytes starting at skb->data. When a nonlinear skb reaches the tagger, this reads past the linear head into unrelated slab memory. The tagger appends an Ethernet FCS but does not declare that tailroom. As a result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user port, and nonlinear skbs can reach the CRC calculation. Declare the required tailroom. DSA will then clear those features and the networking core will linearize skbs before the tagger runs. A KASAN-enabled dsa_loop test using this tagger reports: BUG: KASAN: slab-out-of-bounds in crc32_le Read of size 1 at addr ffff8880397086c0 by task exp/135 Call Trace: crc32_le (lib/crc/crc32-main.c:38) brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343) dsa_user_xmit (net/dsa/user.c:942) dev_hard_start_xmit (net/core/dev.c:3937) __dev_queue_xmit (net/core/dev.c:4926) packet_sendmsg (net/packet/af_packet.c:3110) __sys_sendto (net/socket.c:2281) The buggy address belongs to the object at ffff888039708400 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ffff888039708400, ffff8880397086c0) | ||||
| CVE-2026-98149 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore expected to use slot 1 and CPU3 slot 2. Instead, the current code uses slots 2 and 3 respectively, causing incorrect per-CPU values and an out-of-bounds read from the update buffer for CPU3. The corresponding lookup paths already use a dense offset while iterating over possible CPUs. Do the same for the array, hash, and cgroup storage update paths, advancing the source offset once for each possible CPU. BPF_F_ALL_CPUS continues to use the same value for every CPU. | ||||
| CVE-2026-96546 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2026-09-25 | 2.5 Low |
| A one-byte out-of-bounds heap read flaw was found in GIMP's uncompressed DDS image loader. When a user opens an uncompressed DDS image, the file-dds plug-in performs an unconditional one-byte look-ahead after processing the final pixel. This may cause the plug-in to crash if the byte immediately following the pixel buffer is inaccessible; no information disclosure or code execution has been demonstrated. | ||||
| CVE-2026-61714 | 1 Fluidsynth | 1 Fluidsynth | 2026-09-25 | 7.8 High |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.2.4 until 2.5.6, configuring synth.midi-channels above 16 allows the MIDI player to index _fluid_player_t::channel_isplaying outside its fixed-size heap allocation while tracking active channels. The resulting out-of-bounds reads and writes invoke undefined behavior and may compromise confidentiality, integrity, or availability. No crafted MIDI file is required because the unsafe condition is created by the channel-count configuration itself. Keeping synth.midi-channels at its default value of 16 avoids the vulnerable path. This issue is fixed in version 2.5.6. | ||||
| CVE-2026-81879 | 2 Radare, Radareorg | 2 Radare2, Radare2 | 2026-09-25 | 5.5 Medium |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's ELF PN_XNUM handling was vulnerable because the ELF parser allocated the program-header array using the resolved PN_XNUM count but several consumers still iterated with the original e_phnum value of 65535. The vulnerability is triggered by processing a crafted ELF file with e_phnum = 0xffff and a much smaller resolved count in shdr[0].sh_info. Consumers iterated beyond the allocated program-header array. This can cause a heap out-of-bounds read and process termination, resulting in denial of service; memory disclosure and code execution have not been demonstrated. This issue is fixed in version 6.2.0. | ||||
| CVE-2026-81881 | 2 Radare, Radareorg | 2 Radare2, Radare2 | 2026-09-25 | 3.3 Low |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Mach-O Swift field-metadata parser was vulnerable because a relative Swift field pointer could be lower than the field-metadata section base, making subtraction produce a negative logical index. The vulnerability is triggered by parsing Swift type and class metadata from a crafted Mach-O file. The derived index was used to read four bytes immediately before the allocated field-metadata buffer. This can cause incorrect metadata processing or process termination; no attacker-observable memory disclosure has been demonstrated. This issue is fixed in version 6.2.0. | ||||
| CVE-2026-73242 | 1 Freerdp | 1 Freerdp | 2026-09-25 | 9.1 Critical |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0. | ||||
| CVE-2026-98136 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. | ||||
| CVE-2026-81508 | 1 Espressif | 1 Esp-idf | 2026-09-25 | 4.3 Medium |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. | ||||
| CVE-2026-93793 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate TX_CMD response layout TX_CMD parsing uses frame_count to walk status entries and then read the trailing SCD SSN. Make the minimum-length check follow that exact runtime layout calculation before parsing the payload. For new TX API, reject TX_CMD responses with frame_count != 1 and warn/return in the aggregation handler to document that aggregated accounting is expected via BA notifications. | ||||