Export limit exceeded: 378327 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378327 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72422 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O). | ||||
| CVE-2026-72428 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. | ||||
| CVE-2026-72491 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: fix race condition on rdma->state in trans_rdma.c The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to protect the read-modify-write of rdma->state The race can cause lost state transitions: recv_done() or the CM event handler could set state to FLUSHING/CLOSED while rdma_request() is concurrently checking or modifying state under the lock, leading to the FLUSHING transition being silently overwritten by CLOSING. This corrupts the connection state machine and can cause use-after-free on RDMA request objects during teardown. Fix by adding req_lock protection to all rdma->state modifications in recv_done() and p9_cm_event_handler(), matching the pattern already used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore in the CM event handler since it can race with recv_done() which runs in softirq context. Tested with a kernel module that races two threads (simulating rdma_request and recv_done/CM handler) on rdma->state with proper locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost transitions. | ||||
| CVE-2026-72496 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status. | ||||
| CVE-2026-19906 | 1 Pkp | 1 Pkp-lib | 2026-08-15 | 3.7 Low |
| A weakness has been identified in pkp pkp-lib 3.3.0/3.4.0/3.5.0. This vulnerability affects the function setData of the file classes/user/form/APIProfileForm.php of the component API Key Generation. Executing a manipulation of the argument apiKey can lead to insufficient entropy. The attack may be performed from remote. This attack is characterized by high complexity. It is stated that the exploitability is difficult. This patch is called 529b5df878e571ccc727647f7748eafc1466b041. It is best practice to apply a patch to resolve this issue. | ||||
| CVE-2026-72288 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Handle race between interrupt affinity change and LPI disabling Hyunwoo Kim reports some really bad races should the following situation occur: - LPI-I is pending in vcpu-B's AP list - vcpu-A writes to vcpu-B's RD to disable its LPIs - vcpu-C moves I from B to C If the last two race nicely enough, vgic_prune_ap_list() can drop the irq and AP list locks, reacquire them, and in the interval the irq has been freed. UAF follows. The fix is two-fold: - Before dropping the irq and ap_list locks, take a reference on the irq - Do not try to handle migration of the pending bit: there is no expectation that this state is retained, as per the architecture With that, we're sure that the interrupt is still around, and we safely remove it from the AP list as it has no target at this stage (unless another interrupt fires, but that's another story). | ||||
| CVE-2026-72290 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix GISC refcount leak on AIF enable failure kvm_s390_gisc_register() registers the guest ISC before pinning the guest interrupt forwarding pages and allocating the AISB bit. If any of the later setup steps fails, the function unwinds the pinned pages and other local state, but does not unregister the GISC reference. Add the missing kvm_s390_gisc_unregister() to the error unwind path. | ||||
| CVE-2026-72291 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix unlikely race in try_get_locked_pte() Fix an unlikely race in try_get_locked_pte(), which could have happened if puds or pmds get unmapped between the p?dp_get() and p?d_offset() functions. | ||||
| CVE-2026-72303 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | ||||
| CVE-2026-72306 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg->complete is false list_del(msg); <- double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section. | ||||
| CVE-2026-72307 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace() When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs, the error rollback loop does not correctly revert the preceding replacements. The loop decrements the index but fails to update the vr pointer, which still points to the VR that caused the failure. As a result, the condition and the rollback call always operate on the same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple times on it while never rolling back the earlier VRs. Those VRs continue to hold a reference to new_tree acquired via mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree. Fix by reinitializing vr inside the error loop with the updated index: vr = &mlxsw_sp->router->vrs[i]; so that the loop correctly iterates over all VRs that were actually replaced. | ||||
| CVE-2026-72312 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules. | ||||
| CVE-2026-72313 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Only consider active CRTCs for vblank sync Only synchronize fbdev output to the vblank of an active CRTC. Go over the list of CRTCs and pick the first that matches. Fixes warnings as the one shown below [ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867 [ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0 This currently happens if the fbdev output is not on CRTC 0. Atomic and non-atomic drivers require distinct code paths. As for other fbdev operations, implement both and select the correct one at runtime. Not finding an active CRTC is not a bug. Do not wait in this case, but flush the display update as before. v4: - avoid possible deadlocks with locking context (Sashiko) v3: - drop excessive state validation (Jani) - acquire plane and CRTC mutices (Sashiko) v2: - move look-up code into separate helper - support drivers with legacy modesetting v1: - see https://lore.kernel.org/dri-devel/[email protected]/ | ||||
| CVE-2026-72359 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix NPD in bo_meminfo() When a buffer object is purged, its ttm.resource is set to NULL via the TTM pipeline gutting flow. However, the BO remains in the client's object list until userspace explicitly closes the GEM handle. If memory stats are queried during this time, accessing bo->ttm.resource->mem_type will result in a NULL pointer dereference. Fix this by safely skipping purged BOs in bo_meminfo, as they no longer consume any memory. User is getting NPD on device resume, and possible theory is that in bo_move(), if we need to evict something to SYSTEM to save the CCS state, but the BO is marked as dontneed, this won't trigger a move but will nuke the pages, leaving us with a NULL bo resource. And the meminfo() doesn't look ready to handle a NULL resource. v2 (Sashiko): - There could potentially be other cases where we might end up with a NULL resource, so make this a general NULL check for now. (cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) | ||||
| CVE-2026-72362 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry() The page-table walk framework may pass a NULL *child pointer for unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child) before checking for NULL, then dereferenced the result, causing a crash. Move the container_of() call after a NULL guard, so the function returns early instead of proceeding with an invalid pointer. XE_WARN_ON is kept to help root cause the issue, but we now bail instead of crashing the driver. v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost) (cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff) | ||||
| CVE-2026-72375 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running. | ||||
| CVE-2026-72435 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer() Sashiko pointed out that kfree_rcu() was called before rcu_assign_pointer() in handling the comment extension. Fix the order so that rcu_assign_pointer() called first. | ||||
| CVE-2026-72444 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: check device type before reading ETH_ADDRS __skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb) when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb has a valid Ethernet header at mac_header, which is not always the case. The problem can be triggered by: 1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0) 2. Attaching a multiq qdisc with a flower filter matching on eth_src 3. Sending a packet through AF_PACKET Since TUN in L3 mode has no link-layer header, mac_header points to the L3 data area. The flow dissector reads 12 bytes of uninitialized skb memory, which then propagates through fl_set_masked_key() and is used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN. Rejecting the filter in the control path (at tc filter add time) is not feasible because TC filter blocks can be shared between arbitrary devices -- a filter installed on an Ethernet device may later classify packets on a headerless device through a shared block. The device association is not fixed at filter creation time. Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which ensures only true Ethernet-framed packets have their addresses read. This is more precise than the previous hard_header_len >= 12 check, which would incorrectly pass for non-Ethernet link types like IPoIB (ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21) whose L2 headers are not in Ethernet format. Additionally check skb_mac_header_was_set() to guard against the pathological case where mac_header is the unset sentinel (~0U), which would cause eth_hdr() to return a wild pointer. For the act_mirred redirect case (Ethernet packet redirected to a non-Ethernet device sharing a TC block), zeroing the key is the correct behavior: the packet is now being classified on the target device, where Ethernet address matching is not semantically meaningful. Note: on non-Ethernet devices, the zeroed key will match a filter configured with all-zero MAC addresses. This is an improvement over the previous behavior where uninitialized memory could randomly match any filter. | ||||
| CVE-2026-72447 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: hold socket lock when dumping endpoints in sctp_diag SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing address list access during dump - Reworking sctp_for_each_endpoint() to support restart-based traversal with (net, pos) tracking Also: - Add WARN_ON_ONCE() for inconsistent address counts - Fix idiag_states filtering for LISTEN vs association cases - Skip dumping endpoints being freed (ep->base.dead) - Move dump position tracking into iterator, removing cb->args[4] and its comment for sctp_ep_dump()., - Update the comment for cb->args[4] and remove the comment for unused cb->args[5] for sctp_sock_dump(). Note: traversal is restart-based and may re-scan buckets multiple times, but this is acceptable due to small bucket sizes and required to support sleeping-safe callbacks. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative. | ||||
| CVE-2026-74264 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | ||||