Export limit exceeded: 13117 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (13117 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72302 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-72325 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/core: Avoid enabling BRS from the SVM reload path Branch Sampling (BRS) and Last Branch Record (LBR) are mutually exclusive hardware features, and users of both are tracked via cpuc->lbr_users. When SVM is toggled on a CPU, the host perf events are reprogrammed to update the HostOnly filter bit (set when virtualization is enabled, cleared when it is disabled). On PerfMonV2-capable processors, this reprogramming is performed by calling amd_pmu_enable_all() to rewrite the event selectors. However, amd_pmu_enable_all() also calls amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0. Having active LBR events satisfies this gating on processors that have LBR but not BRS. The kernel then tries to set the BRS enable bit in DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such hardware, the write results in a #GP: Call Trace: <IRQ> amd_pmu_enable_all+0x1d/0x90 amd_pmu_disable_virt+0x62/0xb0 kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm] hardware_disable_nolock+0x1a/0x30 [kvm] __flush_smp_call_function_queue+0x9b/0x410 __sysvec_call_function+0x18/0xc0 sysvec_call_function+0x69/0x90 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 RIP: 0010:cpuidle_enter_state+0xc4/0x450 ? cpuidle_enter_state+0xb7/0x450 cpuidle_enter+0x29/0x40 cpuidle_idle_call+0xf5/0x160 do_idle+0x7b/0xe0 cpu_startup_entry+0x26/0x30 start_secondary+0x115/0x140 secondary_startup_64_no_verify+0x194/0x19b </TASK> Fix this by ensuring that BRS is not enabled from the event selector reprogramming path even when cpuc->lbr_users > 0. | ||||
| CVE-2026-72249 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: use dst in this direction when pushing IPIP header When pushing the IPIP header, the route of the other direction is used to calculate the headroom, use the route in this direction. Accessing the other tuple to set the IP source and destination is fine because this tuple does not provide such information to avoid storing redundant information. However, this tuple already provides the dst for this direction, this went unnoticed because this bug affects headroom and iph->frag_off only at this stage. | ||||
| CVE-2026-72284 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs Ignore KVM's internal "service pending PV EOI" request if the vCPU has disabled PV EOIs since the request was made. Asserting that PV EOIs are enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e. if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables PV EOIs. kernel BUG at arch/x86/kvm/lapic.c:3338! Oops: invalid opcode: 0000 [#1] SMP CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0xb40 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-72203 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | ||||
| CVE-2026-72159 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject non-inline dinodes with i_size and zero i_clusters On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing storage before advancing i_size, and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches i_size_read(inode). A forged directory dinode with a huge i_size and no clusters would repeatedly fail on holes while advancing through the claimed size. Sparse regular files remain exempt: on sparse-alloc volumes, truncate can legitimately grow i_size without allocating clusters. System inodes and inline-data dinodes also retain their separate storage rules. Mirror the check in ocfs2_filecheck_validate_inode_block() as well. filecheck reports through its own error namespace, so malformed size/cluster state is logged as a filecheck invalid-inode result rather than via ocfs2_error(), but it must not proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72111 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects. | ||||
| CVE-2026-72057 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments(). | ||||
| CVE-2026-72060 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: icssg: guard PA stat lookups icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name() with FW PA stat names regardless of whether the PA stats block is present on the hardware. emac_get_stat_by_name() already guards the PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer is NULL the lookup falls through to netdev_err() and returns -EINVAL. Because ndo_get_stats64 is polled regularly by the networking stack this produces thousands of log entries of the form: icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR A secondary consequence is that the int(-EINVAL) return value is implicitly widened to a near-ULLONG_MAX unsigned value when accumulated into the __u64 fields of rtnl_link_stats64, silently corrupting the rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`. Every other PA-aware code path in the driver is already guarded with the same `if (emac->prueth->pa_stats)` check. Apply the same guard here. | ||||
| CVE-2026-72063 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path. | ||||
| CVE-2026-72134 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks. If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO. The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally. But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm0 is never created. Set controller->fallback before re-running spi_imx_setupxfer() so the ECSPI is reconfigured exactly like a normal PIO transfer. With controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma() return false, so it clears spi_imx->usedma and reprograms the controller (clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No explicit spi_imx->usedma = false is needed: setupxfer() already updates it from the can_dma() result. | ||||
| CVE-2026-72141 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the interrupt-driven block-read state machine rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle of this i2c controller. Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to 2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte path. The dummy byte is discarded; block-read callers only consume buf[0..count-1]. Reading I2DR has likewise already armed the next byte on the count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting with -EPROTO; otherwise the failing transfer's STOP cannot complete and the bus stays held. The atomic path regressed earlier (v3.16) and is fixed separately; this patch covers only the v6.13 state-machine rework. | ||||
| CVE-2026-72091 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject user command submission without a command BO amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is skipped, leaving it NULL, and no check rejects it on the user path (the !job->cmd_bo guard lives inside the != INVALID branch). The job is then armed and pushed to the DRM scheduler. aie2_sched_job_run() takes the drv_cmd == NULL path and calls amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) -> to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker. A process with access to the accel node on a system with a probed AMD NPU can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl (cmd_handles = 0). Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO) legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd. Reject the invalid handle for user submissions (drv_cmd == NULL) at the submit choke point so every user path is covered. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-16142 | 2026-08-15 | 9.8 Critical | ||
| The TrueBooker plugin for WordPress is vulnerable to Account Takeover in all versions up to, and including, 1.2.6. This is due to the add_front_user_update() AJAX handler being registered for unauthenticated users and accepting an arbitrary truebooker_wp_user_id value, which is passed directly to wp_update_user() without verifying authentication or ownership. This makes it possible for unauthenticated attackers to change any WordPress user account email address, including an administrator, by submitting the target user ID and an attacker-controlled email address. An attacker can then use the native WordPress password reset flow to receive the reset link at the attacker-controlled email address and take over the account. | ||||
| CVE-2026-68457 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for FSCTL mutations SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB handle but call VFS xattr, fallocate or fileattr helpers with the current ksmbd worker credentials. Those helpers can revalidate inode permissions, ownership and LSM policy independently of the SMB handle access mask. Run each operation with the credentials captured in the target file when the handle was opened. Keep credential handling local to these single-file FSCTLs rather than applying session credentials to the complete IOCTL handler, which also contains handle-less and multi-handle operations. | ||||
| CVE-2026-68461 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: device property: initialize the remaining fields of fwnode_handle in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. [ Fix typo in commit message. - Danilo ] | ||||
| CVE-2026-18216 | 2026-08-15 | N/A | ||
| The Backup Migration WordPress plugin before 2.1.7 does not properly restrict a post-restore automatic login mechanism, allowing a user who administers one site of a multisite network to obtain a long-lived authenticated session as an administrator of another site in the same network, without credentials and bypassing two-factor authentication. | ||||
| CVE-2026-73627 | 1 Jupyter | 1 Jupyterlab | 2026-08-15 | 7.1 High |
| JupyterLab (pip package 'jupyterlab') versions >=4.1.0,<=4.5.9 and >=4.6.0,<=4.6.1 contain a plugin manager lock-rule enforcement bypass. Two server-side enforcement gaps allow an authenticated user to circumvent administrator lock rules by making direct requests to the /lab/api/plugins endpoint, enabling or disabling plugins that were locked — including child plugins of multi-plugin extensions and plugins locked via the 'lock all' mechanism. This can impact data integrity and bypass hardening or restrictions (e.g., download/upload limits) implemented through locked plugins. Fixed in versions 4.6.2 and 4.5.10. | ||||
| CVE-2026-74242 | 1 Redhat | 2 Openshift Update Service, Quay | 2026-08-14 | 5.3 Medium |
| A flaw was found in Red Hat Quay. An administrator of any repository, by knowing or guessing a target notification's Universally Unique Identifier (UUID), can read the notification configuration, including sensitive details like webhook URLs, Slack tokens, and email addresses. This vulnerability also allows them to trigger test notifications for another repository. This could lead to unauthorized information disclosure and potential misuse of notification services. | ||||