Export limit exceeded: 378301 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378301 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74455 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74461 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer. | ||||
| CVE-2026-74462 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74465 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74541 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). | ||||
| CVE-2026-74545 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once. | ||||
| CVE-2026-74546 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | ||||
| CVE-2026-74547 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | ||||
| CVE-2026-19896 | 1 Mangroup | 1 Dtale | 2026-08-15 | 3.7 Low |
| A flaw has been found in mangroup dtale up to 3.22.0. This vulnerability affects the function build_secret_key of the file dtale/app.py of the component Flask Session Cookie. This manipulation causes insufficiently random values. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-74467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. | ||||
| CVE-2026-74468 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). | ||||
| CVE-2026-74469 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | ||||
| CVE-2026-74470 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | ||||
| CVE-2026-74472 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | ||||
| CVE-2026-74475 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use neigh_ha_snapshot() in route_shortcircuit() The neighbour hardware address n->ha can be updated asynchronously by the neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without holding the seqlock loop can lead to torn reads or reading a partially updated MAC address. Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under read_seqbegin()/read_seqretry() lock protection before using it. Note that arp_reduce() and neigh_reduce() seem to have the same issue left for future patches. | ||||
| CVE-2026-74483 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. | ||||
| CVE-2026-74484 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on the instance's own files and s_stack_depth makes overlayfs reject the layer before it ever takes a clone. That also covers the ecryptfs and fuse passthrough variants. What 'F' promises is unchanged. The stable tag is narrower than the Fixes tags on purpose. Before sandboxed mounts this needed global root against the single instance everyone shares, and the change doesn't apply to those trees anyway. Note that SB_I_NODEV is implicitly raised for userns mounts but raise it explicitly here as well. | ||||