Export limit exceeded: 377080 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36131 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53015 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com | ||||
| CVE-2026-64248 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: report dying CPU to RCU in stop_this_cpu() smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") however, irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. That is the asm-generic default used by MIPS. Any irq_work_sync() issued in the reboot/shutdown path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue was noticed on several Realtek MIPS switch SoCs (MIPS interAptiv) and came up during kernel bump downstream in OpenWrt from 6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable branch. The patch also has been backported all the way back to 6.1. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. MIPS shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug offline path is not unprecedented: arm64 does the same in cpu_die_early(). There it is an exception for a CPU that was coming online and is aborting bringup, rather than the default shutdown action as on MIPS. | ||||
| CVE-2026-64269 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). | ||||
| CVE-2026-64278 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-64286 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vCPU context into the hyp's private vCPU on every run. ctxt_to_vcpu() expects a guest context to have a NULL __hyp_running_vcpu, which is only ever set on the host context, so that it resolves the vCPU via container_of(). While this is generally the case, flush_hyp_vcpu() copies the context verbatim and does not enforce this, so a value provided by the host is dereferenced at EL2 (host -> EL2). Fix by clearing __hyp_running_vcpu after the copy. | ||||
| CVE-2026-64240 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. | ||||
| CVE-2026-52978 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: require admin permission for dev-set and key-rotate The dev-set and key-rotate netlink operations modify shared device state (PSP version configuration and cryptographic key material, respectively) but do not require CAP_NET_ADMIN. The only access control is psp_dev_check_access() which merely verifies netns membership. | ||||
| CVE-2026-53013 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1. This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb runs out of space, triggering a WARN_ON in rtnetlink and preventing the interface from being dumped. The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZE The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff"), which added the nla_put_s32() call in macvlan_fill_info() but missed adding the corresponding nla_total_size(4) in macvlan_get_size(). A follow-up commit 55cef78c244d ("macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still did not fix the size calculation. | ||||
| CVE-2026-64280 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. | ||||
| CVE-2026-64281 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] | ||||
| CVE-2026-64162 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() In idpf_ptp_init(), read_dev_clk_lock is initialized after ptp_schedule_worker() had already been called (and after idpf_ptp_settime64() could reach the lock). The PTP aux worker fires immediately upon scheduling and can call into idpf_ptp_read_src_clk_reg_direct(), which takes spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering the lockdep "non-static key" warning: [12973.796587] idpf 0000:83:00.0: Device HW Reset initiated [12974.094507] INFO: trying to register non-static key. ... [12974.097208] Call Trace: [12974.097213] <TASK> [12974.097218] dump_stack_lvl+0x93/0xe0 [12974.097234] register_lock_class+0x4c4/0x4e0 [12974.097249] ? __lock_acquire+0x427/0x2290 [12974.097259] __lock_acquire+0x98/0x2290 [12974.097272] lock_acquire+0xc6/0x310 [12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190 [12974.097318] ? finish_task_switch.isra.0+0xd2/0x350 [12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp] [12974.097343] _raw_spin_lock+0x30/0x40 [12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097391] ? kthread_worker_fn+0x88/0x3d0 [12974.097404] ? kthread_worker_fn+0x4e/0x3d0 [12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf] [12974.097428] ? _raw_spin_unlock_irq+0x28/0x50 [12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf] [12974.097454] ptp_aux_kworker+0x20/0x40 [ptp] [12974.097464] kthread_worker_fn+0xd5/0x3d0 [12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10 [12974.097482] kthread+0xf4/0x130 [12974.097489] ? __pfx_kthread+0x10/0x10 [12974.097498] ret_from_fork+0x32c/0x410 [12974.097512] ? __pfx_kthread+0x10/0x10 [12974.097519] ret_from_fork_asm+0x1a/0x30 [12974.097540] </TASK> Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock is not touched before it's been initialized. | ||||
| CVE-2026-64163 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: test_kprobes: clear kprobes between test runs Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run). | ||||
| CVE-2026-64177 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phonet/pep: disable BH around forwarded sk_receive_skb() The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR | ||||
| CVE-2026-64176 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD. | ||||
| CVE-2026-64175 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic. | ||||
| CVE-2026-64174 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. | ||||
| CVE-2026-64173 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. | ||||
| CVE-2026-64172 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235) Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and share the same erratum #1235: hardware may read a stale IsRunning=1 bit during ICR write emulation and silently fail to generate an AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU. The absence of the VM-Exit causes KVM to miss the required wakeup of blocking target vCPUs, leading to hung vCPUs and unbounded delays in guest execution. Extend the existing AMD Family 17h erratum #1235 workaround to also cover Hygon Family 18h. With IPI virtualization disabled, KVM never sets IsRunning=1 in the Physical ID table, so every non-self IPI generates a VM-Exit and is correctly emulated. | ||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | ||||
| CVE-2026-53155 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: use correct flags for device private PMD entry Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") updated set_pmd_migration_entry() to use pmdp_huge_get_and_clear() in the softleaf case, but made no further adjustments to the function itself. Therefore this function continues to incorrectly use pmd_write(), pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed migration entry should be marked writable, softdirty or uffd-wp respectively. Whilst all are incorrect, the most problematic of these is pmd_write(), as this can lead to corrupted rmap state. On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling pmd_write() on a softleaf will return the softdirty state encoded in the entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled. This was observed when running the hmm.hmm_device_private.anon_write_child selftest: 1. The test faults in a range then migrates it such that a device-private THP range is established. 2. The parent then migrates it to a device-private writable PMD entry whose folio is entirely AnonExclusive with entire_mapcount=1, softdirty set (accidentally correct write state). 3. The parent forks and the PMD entries are set to device-private read only entries, entire_mapcount=2, softdirty still set. 4. [BUG] The child writes to the range then migrates to RAM - intending to install non-writable migration entries - but replacing parent and child PMD mappings with WRITABLE entries due to misinterpreting the softdirty bit. 5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for both parent and child, which are therefore AnonExclusive. 6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets entire_mapcount=2 and we end up with an AnonExclusive folio with entire_mapcount=2! Assert fires in __folio_add_anon_rmap(): VM_WARN_ON_FOLIO(folio_test_large(folio) && folio_entire_mapcount(folio) > 1 && PageAnonExclusive(cur_page), folio) This patch fixes the issue by correctly referencing the softleaf entry fields for writable, softdirty and uffd-wp in set_pmd_migration_entry(). It also only updates A/D flags if the entry is present as these are otherwise not meaningful for a softleaf entry. This patch also flips the if (!present) { ... } else { ... } logic in set_pmd_migration_entry() so it is easier to understand, and adds some comments to make things clearer. I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone device private THP test infrastructure") which first exposes this bug as it was the commit that permitted test_hmm to generate the test. However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") is the commit that actually enabled this behaviour. | ||||