| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GNU SASL before 2.2.4 lacks sanitization of a short challenge in _gsasl_ntlm_client_step in the NTLM client, which could result in memory disclosure via a crafted server. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to the use of uninitialized memory during ASN.1 length processing. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Imaging Component allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized. |
| Use of uninitialized resource in Windows GDI+ allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[[email protected]: s/__GPF_ZERO/__GFP_ZERO/, per David] |
| rsync 3.0.0 before 3.5.0 contains a null pointer dereference vulnerability in the daemon child process that allows remote attackers to crash the daemon by sending a file list whose first entry is a dot entry not typed as a directory. The daemon dereferences the first file list entry as a directory structure pointer without verifying the entry type, resulting in an invalid or uninitialized pointer dereference that terminates the client connection. |
| An information disclosure vulnerability in the URL Filtering feature of Palo Alto Networks PAN-OS® software enables an unauthenticated user with network access to obtain sensitive information.
Panorama is not impacted by this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: initialize standalone TCP-AO response padding
tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP
responses with TCP-AO options. The option length carries the actual MAC
length, but the TCP header length includes the option rounded up to a
four-byte boundary.
tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not
four-byte aligned, the one to three bytes after the MAC are left
uninitialized and may be transmitted. For the normal TCP-AO hashing
mode, those bytes also have to be initialized before computing the MAC.
Initialize only the alignment padding in the TCP-AO branches, before
hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path.
This avoids adding work to non-AO TCP responses while preserving a valid
authenticated header. |
| In the Linux kernel, the following vulnerability has been resolved:
time/jiffies: Register jiffies clocksource before usage
Teddy reported that a XEN HVM has a long boot delay, which was bisected to
the recent enhancements to the negative motion detection. It turned out
that the jiffies clocksource is used in early boot before it is registered,
which leaves the max_delta_raw field at zero. That causes the read out to
be clamped to the max delta of 0, which means time is not making progress.
Cure it by ensuring that it is initialized before its first usage in
timekeeping_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().
skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.
KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:
BUG: KMSAN: kernel-infoleak in _copy_to_iter
_copy_to_iter
__skb_datagram_iter
skb_copy_datagram_iter
netlink_recvmsg
sock_recvmsg
__sys_recvfrom
Uninit was created at:
kmem_cache_alloc_node_noprof
__alloc_skb
net_dm_packet_work
Bytes 173-175 of 176 are uninitialized
Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
| Calling wordexp with WRDE_APPEND in the GNU C Library version 2.0 to version 2.43 can cause the interface to return invalid memory in the we_wordv member, which on subsequent calls to wordfree may abort the process. |
| Use of uninitialized resource in Microsoft COM for Windows allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Event Logging Service allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Improper neutralization of special elements used in an LDAP query ('LDAP injection') vulnerability in Legion of the Bouncy Castle Inc. BC-JAVA bcprov on all (prov modules).
This vulnerability is associated with program files LDAPStoreHelper.
This issue affects BC-JAVA: from 1.74 before 1.80.2, from 1.81 before 1.81.1, from 1.82 before 1.84. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: set fwnode->secondary to NULL in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. |
