| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposure of sensitive information in PostgreSQL security_barrier processing allows a database user to infer values hidden by a security_barrier view, via applying a leaky function to a CASE test value or internal parameter that indirectly represents a protected column. Versions before PostgreSQL 18.7, 17.12, 16.16, 15.20, and 14.25 are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket. |
| In NLnet Labs Unbound up to and including version 1.26.1, an observable cache-level side-channel can be exposed with 'unwanted-reply-threshold > 0' configurations (not a default configuration). If a response-like UDP datagram reaches the upstream source port currently used by a recursive query, but its TXID does not match any pending query, Unbound counts the packet as an unwanted reply. When the accumulated count reaches the configured threshold, Unbound clears the worker's RRset cache and message cache. This cache clear action does not destroy the current upstream UDP pending query. Therefore, an external observer can distinguish whether a candidate port matches the current upstream source port by checking whether an existing cached item has been cleared. This is a cache side-channel vulnerability that can be used to probe the upstream source port. Although the attack is not feasible on default configurations and the suggested value (10 million) makes it an ureliable attack on a public resolver, in scenarios where the attacker can keep a concurrent query window alive, the attacker can first filter the source port and then perform birthday-style guessing against the TXID, making cache poisoning a feasible attack path. |
| In sshd and ssh in OpenSSH before 10.6, an LZ77 dictionary coder can be used even though this is contraindicated by the arXiv 2609.07709 "Crossing the Streams" findings. |
| Backstage is an open framework for building developer portals. Prior to 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper input validation in scaffolder task list ordering. An authenticated Backstage user with permission to create and read relevant scaffolder tasks may be able to infer confidential task data under specific conditions. Successful exploitation requires retained task secrets, visibility of a target task, knowledge of the secret structure, and repeated requests. This issue is fixed in version 4.1.0. |
| When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known. |
| Side-channel information leakage in GPU in Google Chrome on Android prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Side-channel information leakage in WebCodecs in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in Media in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in Skia in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in SVG in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in WebXR in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Medium) |
| Side-channel information leakage in NoStatePrefetch in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Side-channel information leakage in Media in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Issue summary: The CMS_decrypt and PKCS7_decrypt functions are vulnerable to
Bleichenbacher-style attack when an attacker is able to provide the CMS or
S/MIME messages and observe the error code and/or decryption output.
Impact summary: The Bleichenbacher-style attack allows an attacker to use the
victim's vulnerable application as a way to decrypt or sign messages with the
victim's private RSA key.
The attack is possible in 2 variants.
1. The decryption API (CMS_decrypt(), PKCS7_decrypt()) is used without
providing the recipient certificate. In this case OpenSSL iterates over every
KeyTransRecipientInfo (KTRI) without stopping at the first success.
An attacker who authors a message with two KTRI entries — the first one
wrapping a real CEK under the victim's public key, the second with an
arbitrary probe ciphertext — obtains opportunity to iterate the 2nd KTRI to
get a valid PKCS#1 v1.5 padding if the error code of the application is
available.
That is a Bleichenbacher oracle (Bleichenbacher, CRYPTO '98): an
adaptive-chosen-ciphertext side channel from which the attacker decrypts any
RSA ciphertext to the victim's key or forges any PKCS#1 v1.5 signature under
it.
2. When the decryption API (CMS_decrypt(), PKCS7_decrypt()) is provided with
the recipient certificate, and the recipient is not found, a random
key is substituted.
An attacker who authors a message and is able to compare both error code and
the result of the decryption, can mount a Bleichenbacher oracle.
We are not aware of any applications that provide a remote attacker
an opportunity to mount an attack described in these scenarios. We consider
the existence of such application very unlikely, and for this reason this
CVE has been evaluated as Low severity.
To avoid these attacks, when RSA PKCS#1 v1.5 Key Transport is in use, the
invoked EVP_PKEY_decrypt() will use the implicit rejection mechanism described
in draft-irtf-cfrg-rsa-guidance. In previous OpenSSL releases the implicit
rejection was explicitly disabled.
The implicit rejection mechanism always returns a plaintext value,
the symmetric key. This result is deterministic for the ciphertext and the
private key. The length of the decryption result can happen to match the
length of the key of the symmetric cipher that was used for the content
encryption. When a certificate is not provided, the last RecipientInfo
producing a key that looks valid will be used. It may cause getting garbage
content on decryption. As a proper way to deal with this a recipient
certificate has to be provided to identify the particular RecipientInfo for
decryption.
The FIPS modules in 4.0, 3.6, 3.5, and 3.4 are not affected by this issue, as
CMS and S/MIME processing happens outside the OpenSSL FIPS module boundary. |
| Side-channel information leakage in Paint in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in Forms in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Grafana is an open-source platform for monitoring and observability. When using the forget password on the login page, a POST request is made to the `/api/user/password/sent-reset-email` URL. When the username or email does not exist, a JSON response contains a “user not found” message. This leaks information to unauthenticated users and introduces a security risk. This issue has been patched in 9.2.4 and backported to 8.5.15. There are no known workarounds. |
| An information exposure vulnerability in index.php in Synology Photo Station before 6.7.3-3432 and 6.3-2967 allows remote attackers to obtain sensitive system information via unspecified vectors. |
