| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject oversized tx_queue_len at netlink parse time
rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len
without going through netif_change_tx_queue_len(), so a device created
with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and
still triggers the oversized ring allocations in pfifo_fast, tun and
tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the
RTM_NEWLINK-on-existing-device path reach the same sinks.
Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes
NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with
txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers
parse against this policy - rtnl_setlink(), rtnl_newlink() (create
and change), and the veth peer nest - so every netlink path is capped
at parse time and rejects the attribute with -ERANGE plus a proper
"integer out of range" extack message before any device state is
modified (the RTM_SETLINK half-application wart is gone with it).
Document the bound in the rt-link.yaml netlink spec.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn):
ip link add v0 txqueuelen 500000 type veth peer name v1
-> on the fixed kernel this is rejected with -ERANGE ("integer out
of range" extack) instead of installing an oversized tx_queue_len
that later inflates pfifo_fast/tun/tap ring allocations.
- ip link set v0 txqueuelen 500000 is likewise rejected at parse time. |
| sprintf-js through 1.1.3 passes unbounded precision specifiers to toFixed, toExponential, and toPrecision methods without validation, causing uncaught RangeError exceptions. Attackers who control format strings can inject precision values exceeding ECMAScript limits to abort calling operations with minimal payload. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. |
| MikroTik RouterOS before 7.25beta4 contains an improper input validation vulnerability in the labelled-VPN NLRI iterators of the routing service that allows an unauthenticated on-path attacker to crash the BGP service by sending a malformed MP_REACH_NLRI UPDATE message with a prefix-length value below the minimum valid for a labelled-VPN NLRI, which passes validation while describing a route with a negative-length address portion. Attackers can repeatedly send a single BGP UPDATE packet carrying a VPNv4 or VPNv6 NLRI with an out-of-bounds prefix-length to indefinitely hold down the BGP plane, causing session termination without a NOTIFICATION and triggering a service malfunction on the device. The fix is carried only in 7.25beta4, a development build; the current stable release 7.24.2 and the current long-term release 7.23.5 both remain affected. |
| A Security Policy Bypass vulnerability exists in Forcepoint Security Engine (NGFW).
This issue affects Forcepoint Security Engine (NGFW): from 7.1.0 through 7.1.13, from 7.3.0 through 7.3.1, 7.3.3, from 7.4.0 through 7.4.1, and 7.5.0. |
| Improper Validation of Specified Quantity in Input and Allocation of Resources Without Limits or Throttling vulnerability in Samsung Open Source rlottie allows Excessive Allocation. |
| Improper Validation of Specified Quantity in Input vulnerability in Samsung Open Source rlottie allows Input Data Manipulation. |
| Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected.
To remediate this issue, users should upgrade to version v1.89.0 or later. |
| source-map-js through 1.2.1 fails to validate the per-section offset line value in indexed source maps, allowing attackers to specify arbitrary numeric values. Attackers can supply extremely large offset line values that cause synchronous event loop blocking for extended periods, preventing the service from handling other requests. |
| Vulnerability in the Oracle Applications Manager product of Oracle E-Business Suite (component: Command Line - RapidClone). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Applications Manager. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Applications Manager accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows a client holding an open payment channel to obtain paid resources without being charged.
MPP.Session.Actions.accept_voucher/3 in lib/mpp/session/actions.ex treats a voucher whose cumulativeAmount equals the channel's already-accepted cumulative amount as an idempotent success, returning the channel unchanged without calling maybe_spend/2. The credential verifies, the protected resource is served, and spent and units stay where they were. Because the server issues a fresh challenge per request and the credential replay store keys on challenge id and payload, the same signed voucher can be re-presented under every new challenge, so one paid voucher yields an unbounded number of paid units. The path is reachable from any method built on MPP.Session.Method through the Plug, MCP, JSON-RPC and WebSocket transports.
This issue affects mpp: from 0.14.0 before 0.16.2. |
| c-ares is an asynchronous resolver library. Prior to 1.34.7, ares_dns_parse() trusts the attacker-controlled ANCOUNT, NSCOUNT, and ARCOUNT fields before confirming that the DNS response contains enough bytes for the claimed records. Because process_answer() invokes parsing before transaction ID and question validation, a malicious DNS response can cause ares_dns_record_rr_prealloc() and ares_array_set_size() to reserve disproportionate heap memory for a tiny message. Repeated responses create large allocation and release cycles that can degrade or deny name resolution, without causing memory corruption or information disclosure. This issue is fixed in version 1.34.7. |
| OpenSlide is a C library for reading whole slide image files. From 3.4.1 until 4.0.1, OpenSlide's parse_level0_xml() processing in src/openslide-vendor-ventana.c accepts nonpositive row or column tile counts from a crafted Ventana BIF file. The invalid counts produce attacker-controlled relative memory offsets and allow arbitrary values to be written at those offsets, affecting all supported platforms and configurations and resulting in a crash or potential arbitrary code execution. This issue is fixed in version 4.0.1. |
| IBM Controller 11.0.0 through 11.0.1 FP7, and 11.1.0 through 11.1.3 FP1 could allow an authenticated user to bypass input validation due to improper validation of client-side input of file size. |
| Pomerium is an identity and context-aware access proxy. Prior to 0.32.8, decodeQueryStringV2 in pkg/hpke/url.go performs zstd decompression of attacker-controlled data without an output-memory limit when DecryptURLValues processes HPKE V2 values for Stateless.Callback in internal/authenticateflow/stateless.go. In hosted or stateless authentication deployments, an unauthenticated attacker can obtain the receiver key from /.well-known/pomerium/hpke-public-key, provide a matching attacker-controlled sender key, and send a compressed payload to /.pomerium/callback that expands before validateSenderPublicKey rejects the sender. This can allocate hundreds of megabytes per request, exhaust proxy memory, crash or degrade the process, and block access to applications protected by the deployment. Stateful deployments are not affected because the stateful callback verifies its HMAC signature before decryption and decompression. This issue is fixed in version 0.32.8. |
| BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery. A bonded peer can send an AVDTP DISCOVER response with more endpoints than the fixed table holds, causing out-of-bounds writes that corrupt adjacent static objects and crash the process or sever event delivery. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Email Gateway and Cisco Secure Email and Web Manager engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76442 are related to issues with improper validation of specified quantity in input that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-1284. |
