| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to 7.15.2 and 8.10.2, V8 API relationship write paths do not consistently enforce object-level edit and view authorization on both related records. In the verified Account-to-Contact case, an authenticated user can create a relationship while unable to edit the Account and can delete relationship links to a hidden Contact that cannot be viewed directly. This issue is fixed in versions 7.15.2 and 8.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix kernel crash when hard resetting the GPU
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: qcom: msm: mark certain pins as invalid for interrupts
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: remove kasan_find_vm_area() to prevent possible deadlock
find_vm_area() couldn't be called in atomic_context. If find_vm_area() is
called to reports vm area information, kasan can trigger deadlock like:
CPU0 CPU1
vmalloc();
alloc_vmap_area();
spin_lock(&vn->busy.lock)
spin_lock_bh(&some_lock);
<interrupt occurs>
<in softirq>
spin_lock(&some_lock);
<access invalid address>
kasan_report();
print_report();
print_address_description();
kasan_find_vm_area();
find_vm_area();
spin_lock(&vn->busy.lock) // deadlock!
To prevent possible deadlock while kasan reports, remove kasan_find_vm_area(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reject VHT opmode for unsupported channel widths
VHT operating mode notifications are not defined for channel widths
below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the
VHT specification and must be rejected.
Without this check, malformed notifications using these widths may
reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to
invalid input. This issue was reported by syzbot.
Reject these unsupported widths early in sta_link_apply_parameters()
when opmode_notif is used. The accepted set includes 20, 40, 80, 160,
and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined
for VHT, it is allowed to avoid rejecting HE or EHT clients that may
still send a VHT opmode notification. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has
accidentally removed the critical piece of commit c730fce7c70c
("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing
intermittent kernel panics in e.g. perf's on_switch() prog to reappear.
Restore the fix and add a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
htb_lookup_leaf has a BUG_ON that can trigger with the following:
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 htb rate 64bit
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2:1 handle 3: blackhole
ping -I lo -c1 -W0.001 127.0.0.1
The root cause is the following:
1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on
the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not
just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and
since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate ->
htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree,
__rb_change_child in __rb_erase_augmented sets the rb_root pointer to
NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL,
which causes htb_dequeue_tree to call htb_lookup_leaf with the same
hprio rbtree, and fail the BUG_ON
The function graph for this scenario is shown here:
0) | htb_enqueue() {
0) + 13.635 us | netem_enqueue();
0) 4.719 us | htb_activate_prios();
0) # 2249.199 us | }
0) | htb_dequeue() {
0) 2.355 us | htb_lookup_leaf();
0) | netem_dequeue() {
0) + 11.061 us | blackhole_enqueue();
0) | qdisc_tree_reduce_backlog() {
0) | qdisc_lookup_rcu() {
0) 1.873 us | qdisc_match_from_root();
0) 6.292 us | }
0) 1.894 us | htb_search();
0) | htb_qlen_notify() {
0) 2.655 us | htb_deactivate_prios();
0) 6.933 us | }
0) + 25.227 us | }
0) 1.983 us | blackhole_dequeue();
0) + 86.553 us | }
0) # 2932.761 us | qdisc_warn_nonwc();
0) | htb_lookup_leaf() {
0) | BUG_ON();
------------------------------------------
The full original bug report can be seen here [1].
We can fix this just by returning NULL instead of the BUG_ON,
as htb_dequeue_tree returns NULL when htb_lookup_leaf returns
NULL.
[1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/ |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: Fix wraparounds of sk->sk_rmem_alloc.
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da13e ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix transport_{g2h,h2g} TOCTOU
vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload.
transport_{g2h,h2g} may become NULL after the NULL check.
Introduce vsock_transport_local_cid() to protect from a potential
null-ptr-deref.
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
RIP: 0010:vsock_find_cid+0x47/0x90
Call Trace:
__vsock_bind+0x4b2/0x720
vsock_bind+0x90/0xe0
__sys_bind+0x14d/0x1e0
__x64_sys_bind+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0
Call Trace:
__x64_sys_ioctl+0x12d/0x190
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atmarpd_dev_ops does not implement the send method, which may cause crash
as bellow.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246
RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000
RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000
RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287
R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00
R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88
FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
____sys_sendmsg+0x52d/0x830 net/socket.c:2566
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620
__sys_sendmmsg+0x227/0x430 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Abort __tc_modify_qdisc if parent class does not exist
Lion's patch [1] revealed an ancient bug in the qdisc API.
Whenever a user creates/modifies a qdisc specifying as a parent another
qdisc, the qdisc API will, during grafting, detect that the user is
not trying to attach to a class and reject. However grafting is
performed after qdisc_create (and thus the qdiscs' init callback) is
executed. In qdiscs that eventually call qdisc_tree_reduce_backlog
during init or change (such as fq, hhf, choke, etc), an issue
arises. For example, executing the following commands:
sudo tc qdisc add dev lo root handle a: htb default 2
sudo tc qdisc add dev lo parent a: handle beef fq
Qdiscs such as fq, hhf, choke, etc unconditionally invoke
qdisc_tree_reduce_backlog() in their control path init() or change() which
then causes a failure to find the child class; however, that does not stop
the unconditional invocation of the assumed child qdisc's qlen_notify with
a null class. All these qdiscs make the assumption that class is non-null.
The solution is ensure that qdisc_leaf() which looks up the parent
class, and is invoked prior to qdisc_create(), should return failure on
not finding the class.
In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the
parentid doesn't correspond to a class, so that we can detect it
earlier on and abort before qdisc_create is called.
[1] https://lore.kernel.org/netdev/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload()
Add a NULL check for msta->vif before accessing its members to prevent
a kernel panic in AP mode deployment. This also fix the issue reported
in [1].
The crash occurs when this function is triggered before the station is
fully initialized. The call trace shows a page fault at
mt7925_sta_set_decap_offload() due to accessing resources when msta->vif
is NULL.
Fix this by adding an early return if msta->vif is NULL and also check
wcid.sta is ready. This ensures we only proceed with decap offload
configuration when the station's state is properly initialized.
[14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0
[14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G
[14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE
[14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common]
[14739.851985] sp : ffffffc085efb500
[14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158
[14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001
[14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88
[14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000
[14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080
[14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000
[14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0
[14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100
[14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000
[14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8
[14739.926686] Call trace:
[14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211]
[14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211]
[14739.946860] sta_info_move_state+0x1c/0x30 [mac80211]
[14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211]
[14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211]
[14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211]
[14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211]
[14739.975516] genl_family_rcv_msg_doit+0xdc/0x150
[14739.980158] genl_rcv_msg+0x218/0x298
[14739.983830] netlink_rcv_skb+0x64/0x138
[14739.987670] genl_rcv+0x40/0x60
[14739.990816] netlink_unicast+0x314/0x380
[14739.994742] netlink_sendmsg+0x198/0x3f0
[14739.998664] __sock_sendmsg+0x64/0xc0
[14740.002324] ____sys_sendmsg+0x260/0x298
[14740.006242] ___sys_sendmsg+0xb4/0x110 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: Fix stack memory use after return in raid1_reshape
In the raid1_reshape function, newpool is
allocated on the stack and assigned to conf->r1bio_pool.
This results in conf->r1bio_pool.wait.head pointing
to a stack address.
Accessing this address later can lead to a kernel panic.
Example access path:
raid1_reshape()
{
// newpool is on the stack
mempool_t newpool, oldpool;
// initialize newpool.wait.head to stack address
mempool_init(&newpool, ...);
conf->r1bio_pool = newpool;
}
raid1_read_request() or raid1_write_request()
{
alloc_r1bio()
{
mempool_alloc()
{
// if pool->alloc fails
remove_element()
{
--pool->curr_nr;
}
}
}
}
mempool_free()
{
if (pool->curr_nr < pool->min_nr) {
// pool->wait.head is a stack address
// wake_up() will try to access this invalid address
// which leads to a kernel panic
return;
wake_up(&pool->wait);
}
}
Fix:
reinit conf->r1bio_pool.wait after assigning newpool. |
| In the Linux kernel, the following vulnerability has been resolved:
raid10: cleanup memleak at raid10_make_request
If raid10_read_request or raid10_write_request registers a new
request and the REQ_NOWAIT flag is set, the code does not
free the malloc from the mempool.
unreferenced object 0xffff8884802c3200 (size 192):
comm "fio", pid 9197, jiffies 4298078271
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A......
08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc c1a049a2):
__kmalloc+0x2bb/0x450
mempool_alloc+0x11b/0x320
raid10_make_request+0x19e/0x650 [raid10]
md_handle_request+0x3b3/0x9e0
__submit_bio+0x394/0x560
__submit_bio_noacct+0x145/0x530
submit_bio_noacct_nocheck+0x682/0x830
__blkdev_direct_IO_async+0x4dc/0x6b0
blkdev_read_iter+0x1e5/0x3b0
__io_read+0x230/0x1110
io_read+0x13/0x30
io_issue_sqe+0x134/0x1180
io_submit_sqes+0x48c/0xe90
__do_sys_io_uring_enter+0x574/0x8b0
do_syscall_64+0x5c/0xe0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
V4: changing backing tree to see if CKI tests will pass.
The patch code has not changed between any versions. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix uaf in nbd_genl_connect() error path
There is a use-after-free issue in nbd:
block nbd6: Receive control failed (result -104)
block nbd6: shutting down sockets
==================================================================
BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022
Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67
CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: nbd6-recv recv_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline]
recv_work+0x694/0xa80 drivers/block/nbd.c:1022
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
nbd_genl_connect() does not properly stop the device on certain
error paths after nbd_start_device() has been called. This causes
the error path to put nbd->config while recv_work continue to use
the config after putting it, leading to use-after-free in recv_work.
This patch moves nbd_start_device() after the backend file creation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
syzbot found a potential access to uninit-value in nf_flow_pppoe_proto()
Blamed commit forgot the Ethernet header.
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5742 [inline]
__netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837
__netif_receive_skb_one_core net/core/dev.c:5975 [inline]
__netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090
netif_receive_skb_internal net/core/dev.c:6176 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6235
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xb4b/0x1580 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
sof_pdata->tplg_filename can have address allocated by kstrdup()
and can be overwritten. Memory leak was detected with kmemleak:
unreferenced object 0xffff88812391ff60 (size 16):
comm "kworker/4:1", pid 161, jiffies 4294802931
hex dump (first 16 bytes):
73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic.
backtrace (crc 4bf1675c):
__kmalloc_node_track_caller_noprof+0x49c/0x6b0
kstrdup+0x46/0xc0
hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic]
sof_init_environment+0x16f/0xb50 [snd_sof]
sof_probe_continue+0x45/0x7c0 [snd_sof]
sof_probe_work+0x1e/0x40 [snd_sof]
process_one_work+0x894/0x14b0
worker_thread+0x5e5/0xfb0
kthread+0x39d/0x760
ret_from_fork+0x31/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/scheduler: signal scheduled fence when kill job
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix regression with native SMB symlinks
Some users and customers reported that their backup/copy tools started
to fail when the directory being copied contained symlink targets that
the client couldn't parse - even when those symlinks weren't followed.
Fix this by allowing lstat(2) and readlink(2) to succeed even when the
client can't resolve the symlink target, restoring old behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
video: screen_info: Relocate framebuffers behind PCI bridges
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb |
