| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCvf15113, CSCvf15122, CSCvf15125, CSCvf15131, CSCvf15143, CSCvg04088. |
| A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346. |
| A vulnerability in the web interface of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to access sensitive Virtual Directory information on an affected system. The vulnerability exists because the affected software does not sufficiently protect sensitive data when responding to HTTP requests that are sent to the web interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web interface of the software on an affected system. A successful exploit could allow the attacker to access sensitive information about the software. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvc52858. |
| A vulnerability in the DNS input packet processor for Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to cause the DNS process to momentarily restart, which could lead to a partial denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete DNS packet header validation when the packet is received by the application. An attacker could exploit this vulnerability by sending a malformed DNS packet to the application. An exploit could allow the attacker to cause the DNS process to restart, which could lead to a DoS condition. This vulnerability affects Cisco Prime Network Registrar on all software versions prior to 8.3.5. Cisco Bug IDs: CSCvb55412. |
| A vulnerability in the role-based resource checking functionality of Cisco Unified Computing System (UCS) Director could allow an authenticated, remote attacker to view unauthorized information for any virtual machine in a UCS domain. More Information: CSCvc32434. Known Affected Releases: 5.5(0.1) 6.0(0.0). |
| A vulnerability in the Client Manager Server of Cisco Workload Automation and Cisco Tidal Enterprise Scheduler could allow an unauthenticated, remote attacker to retrieve any file from the Client Manager Server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted URL to the Client Manager Server. An exploit could allow the attacker to retrieve any file from the Cisco Workload Automation or Cisco Tidal Enterprise Scheduler Client Manager Server. This vulnerability affects the following products: Cisco Tidal Enterprise Scheduler Client Manager Server releases 6.2.1.435 and later, Cisco Workload Automation Client Manager Server releases 6.3.0.116 and later. Cisco Bug IDs: CSCvc90789. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in the local-mgmt CLI command of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61394 CSCvb86816. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1658) 2.0(1.115). |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655. |
| Cisco Small Business SA520 and SA540 devices with firmware 2.1.71 and 2.2.0.7 allow ../ directory traversal in scgi-bin/platform.cgi via the thispage parameter, for reading arbitrary files. |
| A vulnerability in Session Initiation Protocol (SIP) call handling in Cisco IP Phone 8800 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the SIP process unexpectedly restarts. All active phone calls are dropped as the SIP process restarts. The vulnerability is due to incomplete input validation of the SIP packet header. An attacker could exploit this vulnerability by sending a malformed SIP packet to a targeted phone. An exploit could allow the attacker to cause a DoS condition because all phone calls are dropped when the SIP process unexpectedly restarts. Cisco Bug IDs: CSCvc62590. |
| A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939. |
| A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880. |
| Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| A vulnerability in the HTTP web-based management interface of Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of the affected system. More Information: CSCuw63001 CSCuw63003. Known Affected Releases: 2.2(2). Known Fixed Releases: 3.1(0.0). |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
| A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581. |
