| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
Userspace can restore an ITS Device Table Entry whose Size field encodes
more EventID bits than the virtual ITS supports. The live MAPD path
rejects that state, but vgic_its_restore_dte() accepts it and stores the
out-of-range value in dev->num_eventid_bits.
Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before
allocating the device. This mirrors the MAPD check and prevents the
restored state from reaching vgic_its_restore_itt(), where the unchecked
value can be converted into an oversized scan_its_table() range. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the load endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account.
. Was ZDI-CAN-26680. |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the join endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-26681. |
| Capstone is a disassembly framework. In 6.0.0-Alpha9 and earlier, Capstone's arch/SH/SHDisassembler.c SH floating-point decoders such as opFADD, opFMUL, and opFSUB call set_reg() and set_reg_n() using sh_info.op.op_count without checking the fixed-size operands[] array. Repeated crafted instructions processed through cs_disasm_iter() or cs_disasm() with CS_ARCH_SH, CS_MODE_SH2A or CS_MODE_SH4A, CS_MODE_SHFPU, and CS_OPT_DETAIL can increment the operand count beyond the 176-byte sh_info allocation and perform a four-byte heap buffer overflow write. The corruption can crash the process and may enable code execution depending on heap layout. This issue is fixed in version 6.0.0-Alpha10. |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.68.0 until 2.70.0, the audio-task annotation guide renderer in cvat-ui/src/audio/components/annotation-page/audio-workspace/top-bar/audio-right-group.tsx passes attacker-controlled guide Markdown to MDEditor without the rehype-sanitize plugin. A user who can create or edit an annotation guide can store malicious JavaScript that executes when another user opens the guide. The script can issue arbitrary CVAT requests with the victim user's privileges. This issue is fixed in version 2.70.0. |
| For pull request events, Gitea reads workflow definitions from the pull request head and posts a synthetic skipped status when workflow branch or path filters exclude execution. A fork pull request author can supply a workflow matching a required status context but deliberately prevent it from running. Because skipped statuses count as success, branch protection or organization-required workflow checks can appear satisfied without the mandated workflow executing; no runner or maintainer approval is required for this path. |
| NivoCart through 2.5.1 contains a CAPTCHA bypass vulnerability that allows unauthenticated attackers to defeat form protection because the expected code is printed as plain text in the HTML. Attackers can fetch protected forms, extract the captcha_image value with a pattern match, and submit it to automate spam, registrations, reviews, and account deletion requests. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact] |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate Adaptation Indication parameter length
The Adaptation Layer Indication parameter contains a fixed 32-bit
Adaptation Code Point after its parameter header. However,
sctp_verify_param() accepts a header-only parameter because the generic
parameter walker only requires the header to be present.
sctp_process_param() then reads adaptation_ind beyond the declared
parameter. When the malformed parameter is last in an INIT, the read
starts at the receive skb tail, and the value is copied into the state
cookie returned in the INIT ACK. This may disclose four receive-buffer
tail bytes.
Require the declared parameter length to match the fixed structure size
and abort the association through the existing invalid parameter length
path otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing
The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct
overlays to access and modify the domain field in the EP11 CPRB
payload, creating maintainability and security concerns:
1. Struct overlay approach (pld_hdr) assumes fixed payload structure
and doesn't validate the actual ASN.1 encoding.
2. Complex length format detection logic is error-prone and doesn't
properly validate bounds at each parsing step.
3. Direct struct member access bypasses proper ASN.1 validation.
Fix by replacing struct overlays with explicit ASN.1 parsing that
validates each field (payload tag/length, function tag/length/value,
optional domain tag/length/value) with proper bounds checking at every
step. Add asn1_int_encode() helper function to safely write integer
values with correct endianness conversion. This makes the code
consistent with the validation pattern introduced with the rework of
the xcrb_msg_to_type6_ep11cprb_msgx() function. |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() for transmit path header pulls
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put
In sof_ipc4_bytes_put(), the copy size is derived from the old
data->size in the buffer rather than the incoming new data's size
field from ucontrol. If the new data has a different size, the copy
uses the wrong length: it may truncate valid data or copy stale bytes.
Fix by validating and using the incoming data's sof_abi_hdr.size from
ucontrol before copying. |
| Protection Mechanism Failure vulnerability in hexpm hex allows the owner of a package, or an attacker who has taken over the owner's account, to get a newly published release past the release-age cooldown.
The cooldown (cooldown config, HEX_COOLDOWN) withholds versions younger than the configured age during dependency resolution. When the release of a package locked in mix.lock is retired or has a security advisory, Hex.RemoteConverger.build_cooldown_bypass/3 and Hex.RemoteConverger.unsafe_lock_bypass/1 lift the cooldown for every version of that package and of every package the locked release depends on, so that mix deps.update can move off the unsafe release. Retiring a release needs the same package owner permission as publishing one. An attacker who publishes a malicious release can retire the currently locked release, and the next mix deps.update that unlocks the package selects the new release regardless of its age. Hex.Registry.Cooldown.versions/2 checks the bypass by package name alone, so the bypass also covers packages with the same name in other repositories. Cooldown configured through an organization dependency policy is not affected.
This issue affects hex: from 2.5.0 before 2.5.2. |
