| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rainbond through 6.9.7 contains a broken access control vulnerability in the CheckToken function that allows authenticated attackers to access unauthorized enterprise resources by substituting another enterprise's tenant name in URL paths. Attackers can use any valid API token to bypass enterprise ID verification and access or modify another enterprise's services, plugins, environment variables, and certificates. |
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. From 4.4.2 until 4.5.0-rc.4, `POST /api/v1/runs/:runParam/replay` in apps/webapp/app/routes/api.v1.runs.$runParam.replay.ts uses `prisma.taskRun.findUnique({ where: { friendlyId: runParam } })` without a runtimeEnvironmentId filter, then ReplayTaskRunService in apps/webapp/app/v3/services/replayTaskRun.server.ts replays the selected run in the victim environment. Any valid environment API key can therefore replay another tenant's run by friendlyId, consuming victim resources and repeating side effects; when `payloadType: "application/store"` is used, overrideExistingPayloadPacket() calls conditionallyImportPacket() on existingTaskRun.payload without an integrity check, so payload bytes overwritten through a separate object-store path-traversal vulnerability become attacker-controlled input to the victim task. This issue is fixed in version 4.5.0-rc.4. |
| When using Google Secrets Manager as a backend for the Spring Cloud Config server a client can craft a request to the config server potentially exposing secrets from unintended GCP projects.
Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: Reset positive result codes to zero in object map update path
In a reply message to an RBD request, a positive result code indicates
a data payload, which is not allowed for writes. While
rbd_osd_req_callback() already resets a positive result code for writes
to zero, rbd_object_map_callback() does not. This allows a corrupted
reply to an object map update to trigger the rbd_assert(*result < 0) in
__rbd_obj_handle_request(). This happens, because
rbd_object_map_callback() calls rbd_obj_handle_request() ->
__rbd_obj_handle_request() and passes this positive result code. From
__rbd_obj_handle_request(), rbd_obj_advance_write() is called, which
leaves the positive result code unchanged and returns true. Therefore,
the if(done && *result) branch is executed in __rbd_obj_handle_request()
and the assertion triggers.
This patch fixes the issue by adjusting the logic in the
rbd_object_map_callback() path. A positive result code for an object map
update is now reset to zero (similar to rbd_osd_req_callback()), and the
message is subsequently handled the same way as if the result code was
zero from the beginning. Additionally, a WARN_ON_ONCE() is added for
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| NextAuth.js provides authentication for Next.js. From next-auth 5.0.0-beta.0 until 5.0.0-beta.32, applications that gate access by checking only for the existence of the auth object returned by the auth() wrapper can fail open when Auth.js has a server configuration error. In middleware, Route Handlers, React Server Components, and other auth() entry points, a non-OK session response is parsed into a truthy error object instead of null, so checks such as !!auth and if (req.auth) evaluate to true for unauthenticated requests. A provider missing both the issuer and authorization endpoint triggers InvalidEndpoints, and an unset AUTH_SECRET or another server configuration error can produce the same behavior. There is no impact while configuration is valid, but after a deployment becomes misconfigured, routes protected only by session existence silently grant access to every visitor. This issue is fixed in next-auth 5.0.0-beta.32. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA AES cipher key requests
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block. |
| Improper input validation in Samsung Members prior to version 5.8.01.5 allows local attackers to access arbitrary URL and launch arbitrary activity with Samsung Members privilege. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: restrict socket creation to the initial network namespace
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Reject monmaps advertising zero monitors
A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a
monitor to the client. This monmap contains information about the
existing monitors in the cluster. Currently, a monmap indicating that
there are zero monitors in the cluster is treated as valid. However, it
is impossible to have zero monitors in the cluster and still receive a
valid monmap from a monitor. Therefore, such a monmap must be corrupted
and should be treated as invalid. Furthermore, a monmap with a monitor
count of zero can subsequently crash the client when attempting to open
a session with a monitor in __open_session(). This happens because the
"BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is
triggered.
This patch extends a check in ceph_monmap_decode() to also reject
arriving mon_maps with num_mon == 0 rather than only with
num_mon > CEPH_MAX_MON.
[ idryomov: drop "log output for unusual values of num_mon" part ] |
| Kibana Agent Builder A2A JSON-RPC API endpoint derives the identifier of a stored conversation from a user-supplied input, and the ownership check on that identifier does not distinguish between a conversation that does not exist and one that exists but belongs to another user. As a result, an authenticated user holding only the Agent Builder read privilege can supply an identifier already in use by another user in the same space and cause that user's conversation to be replaced and reassigned to the requesting account. The original owner permanently loses access to the conversation and its history. The impact is limited to loss of integrity and availability of the affected conversation; the attacker does not read the overwritten content. |
| A flaw was found in Yelp due to an overly permissive Content Security Policy (CSP) implementation provided by yelp-xsl. A malicious Flatpak application can open crafted help content through the OpenURI portal. By embedding an untrusted CSS stylesheet within a structured SVG document, attacker-controlled content can bypass Flatpak's intended sandbox isolation, allowing Yelp to evaluate local XML inclusions and disclose arbitrary user-readable host files through remote CSS resource requests. This may result in the unauthorized disclosure of sensitive information. |
| Budibase versions before 3.40.0 contain an authorization/authentication bypass in the PUT /api/global/users/tenant/owner (changeTenantOwnerEmail) endpoint. On self-hosted instances (SELF_HOSTED or DISABLE_ACCOUNT_PORTAL set), the cloudRestricted middleware is a no-op and the route is protected only by a general authentication check, so any authenticated user — including a lowest-privilege BASIC app user — can reassign the tenant account-holder (top-privilege admin) email to an attacker-controlled address. The attacker can then use the public password-reset flow to take over the admin account, leading to full administrative access. |
| A flaw in Elasticsearch allows a low-privileged authenticated user to submit a single request containing a crafted user-supplied input. A specific internal component validates the input using a recursive routine and applies no bound to the length of the value being validated, so the validation causes the thread to exhaust its stack. The resulting fatal error is not handled by the surrounding execution paths and terminates the affected node process, producing a denial of service. |
| Elasticsearch does not apply its configurable input length restriction to a user-supplied pattern accepted by an intervals query. Compiling a deeply nested pattern drives unbounded recursion that exhausts the thread stack and raises a fatal error, terminating the Elasticsearch node process and causing a denial of service for that node. An authenticated user holding only read-only privileges on a single searchable index can trigger the condition with one small search request. |
| A flaw in Elasticsearch allows an authenticated user with the privileges required to invoke the simulate pipeline API endpoint (https://www.elastic.co/docs/api/doc/elasticsearch/operation/operation-ingest-simulate) to submit a request that causes a self-referential data structure to be created. When a specific internal component later processes that structure, the operation recurses without bound and raises a fatal error that is not handled by the surrounding execution path, terminating the affected node process and resulting in a denial of service. |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Fleet Server can lead to information disclosure via Manipulating User-Controlled Variables (CAPEC-77). The authorization decision for artifact downloads relied on a client-supplied value that was persisted without being validated against the server-side record of the requesting agent's assignment. An authenticated party in possession of a valid enrolled agent credential could therefore retrieve a policy the agent is not assigned to. |
