| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate. |
| Incomplete cleanup in GetUserMedia in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Incomplete cleanup in Chromium in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted Chrome extension. (Chromium security severity: Low) |
| File Browser versions from 2.63.6 through 2.63.23 fail to clean up public share links when a privileged user deletes another user's shared file. Attackers can access the surviving share link to retrieve new unrelated content uploaded to the same path without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| filebrowser through 2.63.23 does not remove share records when a shared file is renamed (only deletion triggers share cleanup). The share record is keyed by path, so it survives the rename and remains dormant (returning 404 while the path is empty). When any new, unrelated file later appears at the original shared path — via re-upload, another user with create permission, or a hook — the stale public share link serves that new file under the original link's password and expiry settings, unexpectedly exposing it. |
| A parser state isolation vulnerability in misp-stix could cause data from a previously processed STIX document to be retained and incorporated into the MISP event generated from a subsequent document when the same parser instance is reused.
Several STIX 1 and STIX 2 parser components maintained per-document state that was not completely cleared between conversions. In the STIX 2 parser, galaxy and galaxy-cluster information, including custom galaxy clusters, could survive a parser reset and subsequently be associated with objects from another bundle.
The STIX 1 parsers were affected by the same underlying state-management issue. Depending on the parser type, retained information could include galaxies, references, passive DNS bookkeeping, package titles, dates, and timestamps. As a result, parsing a second STIX package with an already-used parser could produce a MISP event containing information that was present only in the previously processed package. For example, a generated event could inherit passive DNS records from an earlier document, reference unrelated galaxy information, combine titles from different packages, or use timestamps originating from another conversion.
The issue primarily affects applications using the misp-stix API directly and reusing parser instances across independent STIX documents. Normal conversion entry points that instantiate a new parser for each file are not affected by this particular reuse scenario.
An attacker able to influence documents processed by such a long-lived parser could potentially cause information from one conversion to contaminate a subsequent MISP event. This can affect the integrity of generated threat intelligence, resulting in incorrect associations, misleading contextual information, or unrelated indicators being attributed to an event. In environments where consecutive documents have different access controls or distribution scopes, the retained state could additionally result in limited disclosure of information from a previously processed document.
Successful exploitation depends on the consuming application reusing the same parser instance and on the ordering of processed documents, which increases attack complexity. No direct availability impact or code execution is involved. |
| IndexedDB should be cleared when leaving private browsing mode and it is not, the API for WKWebViewConfiguration was being used incorrectly and requires the private instance of this object be deleted when leaving private mode. This vulnerability affects Firefox for iOS < 27. |
| Mattermost versions 10.11.x <= 10.11.20, 11.7.x <= 11.7.5 Mattermost fails to remove thread membership records when a user is removed from or leaves a team, which allows a previously removed user who is later re-invited to the team to view private channel thread root post content and metadata via the team threads API.. Mattermost Advisory ID: MMSA-2026-00682 |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a remote unauthenticated P2P peer can stall a Zebra node by racing an invalid block body against the valid canonical body for the same block header hash. ZIP-244 permits the attacker to mutate coinbase scriptSig authentication data while retaining the transaction identifiers, merkle root, and block header hash, so the poisoned body fails later commitment validation but shares the canonical hash. In zebra-state/src/service.rs, queue_and_commit_to_non_finalized_state recorded the hash in non_finalized_block_write_sent_hashes before contextual validation completed and did not remove it when the write task rejected the body. When the honest body later arrived, the cached hash caused KnownBlock::WriteChannel duplicate handling to suppress it, leaving the node stuck one height behind until restart or reorganization. This issue is fixed in version 4.5.0. |
| Incomplete cleanup in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information locally. |
| Webhooks created by a collaborator keep firing after their repo access is revoked → ongoing real-time exfiltration of private repo content (incomplete revocation cleanup in `DeleteCollaboration`) |
| Incomplete cleanup in some UEFI firmware for some Intel(R) reference platforms within UEFI may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts. |
| Software installed and run as a non-privileged user may conduct a sequence of improper GPU system calls causing use after free, which helps in facilitating unprivileged memory access from a shader code.
Triggering failure path in the MMU mapping logic by a malicious code could lead to incomplete cleanup of an internal driver state, allowing for future unauthorized access to the contents of the physical memory. |
| A security flaw has been discovered in poco-ai poco-agent up to 0.5.4. Affected is the function WorkspaceManager._setup_session_persistence of the file executor/app/core/workspace.py of the component Claude File Handler. The manipulation results in incomplete cleanup. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is told to be difficult. The exploit has been released to the public and may be used for attacks. |
| Sharp and Toshiba Tec MFPs (multifunction printers) caches data internally when printing, and leave them uncleared. They may be accessed later by other users. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: avoid leaving partial pfn mappings around in error case
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: fix invalid unregister error path
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.
This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path. |
