| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cryptography misuse in Storage: Quota Manager component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157. |
| Sandbox escape in the XUL component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157. |
| Sandbox escape due to incorrect boundary conditions in the Graphics: WebRender component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| Unauthenticated Insecure Direct Object References (IDOR) in Photo Reviews for WooCommerce <= 1.2.30 versions. |
| A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: purge async notifications upon nic error
This fixes a kernel panic in reconfig failure:
1. we have a BSS connection
2. we have a NAN connection
3. FW error occurs
4. reconfig restores the BSS connection
5. however, restoring the NAN connection fails due to a FW error.
6. erroneously, ieee80211_handle_reconfig_failure is called and marks all
interfaces as not-in-driver (will be fixed in a different patch).
7. mac80211 frees the links of the BSS connection but doesn't tell the
driver about that, as it thinks that this vif is not in the driver.
8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed
(erroneously?)
9. Therefore, async_handlers_wk is being executed, processing the
statistics notification that was received after we restored the BSS
connection.
10. the notification handler dereferences fw_id_to_bss_conf[id], which is
now a dangling pointer, as mac80211 already freed this link in (7).
11. On the first access to one of the links fields, we panic.
While this can and should be fixed by removing the call to
ieee80211_handle_reconfig_failure in (6), it is also not a good idea to
carry and maybe handle notifications from a dead FW.
We do purge the notifications when we stop the FW, but in reconfig
failure we stop the FW too late, after the notifications are processed.
In addition, async_handlers_wk can always be scheduled before the
reconfig work.
Purge the notifications immediately when transport notifies about a nic
error. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| Insertion of Sensitive Information Into Sent Data vulnerability in WPExperts CF7 Apps contact-form-7-honeypot allows Retrieve Embedded Sensitive Data.This issue affects CF7 Apps: from n/a through 3.7.2. |
| Joomla Extension - ordasoft.com - Reflected Cross-Site Scripting in Book Library (Free) < 6.4.6 - The public book-detail page template, site/views/view_book/tmpl/default.php, echoes the raw title request parameter directly into a double-quoted HTML attribute with no escaping function of any kind (echo $_REQUEST["title"];). A value containing a double quote closes the attribute early and allows arbitrary HTML/JavaScript to follow. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| Unauthenticated Insecure Direct Object References (IDOR) in Bus Ticket Booking with Seat Reservation <= 5.9.3 versions. |
| Contributor PHP Object Injection in Icegram <= 3.1.31 versions. |
| In JetBrains YouTrack before 2026.2.19197 helpdesk project's Authorized Reporters list could be bypassed |
| In JetBrains YouTrack before 2026.2.19197 project administrators could read comments from other projects via notification templates |
| A flaw was found in Moodle. The XML grade import feature lacks proper Cross-Site Request Forgery (CSRF) token validation. By tricking an authenticated user with grade management permissions into visiting a malicious webpage, an attacker can trigger unauthorized requests on the victim's behalf. This flaw allows a remote attacker to set or overwrite student grades without authorization. |
| A flaw was found in Moodle. Insufficient sanitization of username input on the password reset page allows a remote attacker to conduct a cross-site scripting (XSS) attack. By convincing an unauthenticated user to access a specially crafted password reset link, an attacker could execute arbitrary script in the victim's browser. |
| IBM Guardium Data Protection 12.2 is vulnerable to path traversal and arbitrary file deletion in the Datasource REST component. An authenticated remote attacker could exploit this vulnerability to delete files and potentially cause denial of service or impact system integrity. |
| IBM Guardium Data Protection 12.2 is vulnerable to command injection in the SNMP alert notification functionality. An authenticated attacker who can influence policy alert text can cause attacker-controlled data to be executed as operating system commands by the SNMP alerter service, which runs with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Validate partition index before array access
construct_region() reads cxled->part and uses it to index
cxlds->part[] without checking for a negative value. If the
partition was never resolved, part remains at its initial value
of -1, causing an out-of-bounds array access.
Add a guard to return -EBUSY when part is negative.
The check was dropped during a merge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ. |
