| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(),
which could lead to a NULL pointer dereference on failure of
kzalloc().
Fix this bug by adding a check of tmpbuf.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings,
and our static analyzer no longer warns about this code. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/xen: Drop USERGS_SYSRET64 paravirt call
commit afd30525a659ac0ae0904f0cb4a2ca75522c3123 upstream.
USERGS_SYSRET64 is used to return from a syscall via SYSRET, but
a Xen PV guest will nevertheless use the IRET hypercall, as there
is no sysret PV hypercall defined.
So instead of testing all the prerequisites for doing a sysret and
then mangling the stack for Xen PV again for doing an iret just use
the iret exit from the beginning.
This can easily be done via an ALTERNATIVE like it is done for the
sysenter compat case already.
It should be noted that this drops the optimization in Xen for not
restoring a few registers when returning to user mode, but it seems
as if the saved instructions in the kernel more than compensate for
this drop (a kernel build in a Xen PV guest was slightly faster with
this patch applied).
While at it remove the stale sysret32 remnants.
[ pawan: Brad Spengler and Salvatore Bonaccorso <[email protected]>
reported a problem with the 5.10 backport commit edc702b4a820
("x86/entry_64: Add VERW just before userspace transition").
When CONFIG_PARAVIRT_XXL=y, CLEAR_CPU_BUFFERS is not executed in
syscall_return_via_sysret path as USERGS_SYSRET64 is runtime
patched to:
.cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8,
0x48, 0x0f, 0x07 }, // swapgs; sysretq
which is missing CLEAR_CPU_BUFFERS. It turns out dropping
USERGS_SYSRET64 simplifies the code, allowing CLEAR_CPU_BUFFERS
to be explicitly added to syscall_return_via_sysret path. Below
is with CONFIG_PARAVIRT_XXL=y and this patch applied:
syscall_return_via_sysret:
...
<+342>: swapgs
<+345>: xchg %ax,%ax
<+347>: verw -0x1a2(%rip) <------
<+354>: sysretq
] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: avoid a use-after-free when BO init fails
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.
Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: [next] staging: media: atomisp: fix memory leak of object flash
In the case where the call to lm3554_platform_data_func returns an
error there is a memory leak on the error return path of object
flash. Fix this by adding an error return path that will free
flash and rename labels fail2 to fail3 and fail1 to fail2. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cadence: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: img-scb: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix reference leak when pm_runtime_get_sync fails
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: sprd: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvbdev: Fix memory leak in dvb_media_device_free()
dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn`
before setting it to NULL, as documented in include/media/media-device.h:
"The media_entity instance itself must be freed explicitly by the driver
if required." |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: Fix a potential use after free
Free the adap structure only after we are done using it.
This patch just moves the put_device() down a bit to avoid the
use after free.
[wsa: added comment to the code, added Fixes tag] |
| "IBM InfoSphere Information Server 11.7 could allow a user to cause a denial of service by removing the ability to run jobs due to improper input validation. IBM X-Force ID: 235725." |
| "IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 Web services could allow a man-in-the-middle attacker to conduct SOAPAction spoofing to execute unwanted or unauthorized operations. IBM X-Force ID: 234762." |
| "IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-"Force ID: 231361. |
| "IBM InfoSphere Information Server 11.7 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 227592." |
| Insertion of Sensitive Information into Log File vulnerability in Hitachi Ops Center Analyzer on Linux (Virtual Strage Software Agent component) allows local users to gain sensitive information.
This issue affects Hitachi Ops Center Analyzer: from 10.8.1-00 before 10.9.0-00
|
| Server-Side Request Forgery (SSRF) vulnerability in Hitachi Infrastructure Analytics Advisor on Linux (Data Center Analytics, Analytics probe components), Hitachi Ops Center Analyzer on Linux (Hitachi Ops Center Analyzer detail view, Hitachi Ops Center Analyzer probe components) allows Server Side Request Forgery.
This issue affects Hitachi Infrastructure Analytics Advisor: from 2.0.0-00 through 4.4.0-00; Hitachi Ops Center Analyzer: from 10.0.0-00 before 10.9.0-00.
|
| A local privilege escalation (PE) vulnerability in the Palo Alto Networks Cortex XSOAR engine software running on a Linux operating system allows a local attacker with shell access to the engine to execute programs with elevated privileges. |
