| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper resource shutdown or release vulnerability has been identified in the Click Plus C2-03CPU-2 device running firmware version 3.60. The vulnerability allows an unauthenticated attacker to perform a denial-of-service attack by exhausting all available device sessions in the Remote PLC application. |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. |
| fs2 is a compositional, streaming I/O library for Scala. Versions up to and including 2.5.12, 3.0.0-M1 through 3.12.2, and 3.13.0-M1 through 3.13.0-M6 are vulnerable to denial of service attacks though TLS sessions using fs2-io on the JVM using the fs2.io.net.tls package. When establishing a TLS session, if one side of the connection shuts down `write` while the peer side is awaiting more data to progress the TLS handshake, the peer side will spin loop on the socket read, fully utilizing a CPU. The CPU is consumed until the overall connection is closed, potentially shutting down a fs2-io powered server. This issue is fixed in versions 2.5.13, 3.12.1, and 3.13.0-M7. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| A vulnerability, which was classified as problematic, was found in TechPowerUp GPU-Z 2.23.0. Affected is the function sub_140001880 in the library GPU-Z.sys of the component 0x8000645C IOCTL Handler. The manipulation leads to memory leak. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A denial-of-service vulnerability exists via the CIP/Modbus port in the Rockwell Automation Micro850/870 (2080 -L50E/2080 -L70E). If exploited, the CIP/Modbus communication may be disrupted for short duration. |
| Hardware logic with insecure de-synchronization in Intel(R) DSA and Intel(R) IAA for some Intel(R) 4th or 5th generation Xeon(R) processors may allow an authorized user to potentially enable escalation of privilege local access |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB and classified as problematic. Affected by this issue is the function GetDebugLogFile of the file Library/MemLogLib/BootLog.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The patch is identified as d2143a1e2deefddd9b105fb7160763c4f8d47ea2. It is recommended to apply a patch to fix this issue. |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.
|
| An issue in obgm and Libcoap v.a3ed466 allows a remote attacker to cause a denial of service via thecoap_context_t function in the src/coap_threadsafe.c:297:3 component. |
| In FRRouting (FRR) before 10.3 from 6.0 onward, all routes are re-validated if the total size of an update received via RTR exceeds the internal socket's buffer size, default 4K on most OSes. An attacker can use this to trigger re-parsing of the RIB for FRR routers using RTR by causing more than this number of updates during an update interval (usually 30 minutes). Additionally, this effect regularly occurs organically. Furthermore, an attacker can use this to trigger route validation continuously. Given that routers with large full tables may need more than 30 minutes to fully re-validate the table, continuous issuance/withdrawal of large numbers of ROA may be used to impact the route handling performance of all FRR instances using RPKI globally. Additionally, the re-validation will cause heightened BMP traffic to ingestors. Fixed Versions: 10.0.3, 10.1.2, 10.2.1, >= 10.3. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| MANTRA is a purpose-built RWA Layer 1 Blockchain, capable of adherence to real world regulatory requirements. Versions 4.0.1 and below do not enforce the tx gas limit in its send hooks. Send hooks can spend more gas than what remains in tx, combined with recursive calls in the wasm contract, potentially amplifying the gas consumption exponentially. This is fixed in version 4.0.2. |
| Stalwart is a mail and collaboration server. Versions 0.13.3 and below contain an unbounded memory allocation vulnerability in the IMAP protocol parser which allows remote attackers to exhaust server memory, potentially triggering the system's out-of-memory (OOM) killer and causing a denial of service. The CommandParser implementation enforces size limits on its dynamic buffer in most parsing states, but several state handlers omit these validation checks. This issue is fixed in version 0.13.4. A workaround for this issue is to implement rate limiting and connection monitoring at the network level, however this does not provide complete protection. |
| Scrapy versions up to 2.13.2 are vulnerable to a denial of service (DoS) attack due to a flaw in its brotli decompression implementation. The protection mechanism against decompression bombs fails to mitigate the brotli variant, allowing remote servers to crash clients with less than 80GB of available memory. This occurs because brotli can achieve extremely high compression ratios for zero-filled data, leading to excessive memory consumption during decompression. |
| The attack vector is a potential Denial of Service (DoS). The vulnerability is caused by an insufficient check on the length of a decompressed domain name within a DNS packet.
An attacker can craft a malicious DNS packet containing a highly compressed domain name. When the resolv library parses such a packet, the name decompression process consumes a large amount of CPU resources, as the library does not limit the resulting length of the name.
This resource consumption can cause the application thread to become unresponsive, resulting in a Denial of Service condition. |
| go-crypto-winnative Go crypto backend for Windows using Cryptography API: Next Generation (CNG). Prior to commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41, calls to `cng.TLS1PRF` don't release the key handle, producing a small memory leak every time. Commit f49c8e1379ea4b147d5bff1b3be5b0ff45792e41 contains a fix for the issue. The fix is included in versions 1.23.6-2 and 1.22.12-2 of the Microsoft build of go, as well as in the pseudoversion 0.0.0-20250211154640-f49c8e1379ea of the `github.com/microsoft/go-crypto-winnative` Go package. |
| A vulnerability was found in Ackites KillWxapkg up to 2.4.1. It has been rated as problematic. This issue affects some unknown processing of the component wxapkg File Decompression Handler. The manipulation leads to resource consumption. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| An improper resource shutdown or release vulnerability has been identified in the Click Plus C2-03CPU-2 device running firmware version 3.60. The vulnerability allows an unauthenticated attacker to perform a denial-of-service attack by exhausting all available device sessions of the Click Programming Software. |
| CUPS cups-browsed before 2.5b1 will send an HTTP POST request to an arbitrary destination and port in response to a single IPP UDP packet requesting a printer to be added, a different vulnerability than CVE-2024-47176. (The request is meant to probe the new printer but can be used to create DDoS amplification attacks.) |
