| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by using formatted specifiers in a SIP payload that is sent to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones that are running firmware release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63986. |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending malformed SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA51x Series IP Phones that are running Cisco SPA51x Firmware Release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63982. |
| A vulnerability in the web framework of Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve96608. |
| A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785. |
| Cisco IOS before 12.2(33)SXI allows local users to cause a denial of service (device reboot). |
| A vulnerability in the Traversal Using Relay NAT (TURN) server included with Cisco Meeting Server (CMS) could allow an authenticated, remote attacker to gain unauthenticated or unauthorized access to components of or sensitive information in an affected system. The vulnerability is due to an incorrect default configuration of the TURN server, which could expose internal interfaces and ports on the external interface of an affected system. An attacker could exploit this vulnerability by using a TURN server to perform an unauthorized connection to a Call Bridge, a Web Bridge, or a database cluster in an affected system, depending on the deployment model and CMS services in use. A successful exploit could allow the attacker to gain unauthenticated access to a Call Bridge or database cluster in an affected system or gain unauthorized access to sensitive meeting information in an affected system. To exploit this vulnerability, the attacker must have valid credentials for the TURN server of the affected system. This vulnerability affects Cisco Meeting Server (CMS) deployments that are running a CMS Software release prior to Release 2.0.16, 2.1.11, or 2.2.6. Cisco Bug IDs: CSCvf51127. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441. |
| A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| An Access-Control Filtering Mechanisms Bypass vulnerability in certain access-control filtering mechanisms on Cisco Nexus 7000 Series Switches could allow an unauthenticated, remote attacker to bypass defined traffic configured within an access control list (ACL) on the affected system. More Information: CSCtz59354. Known Affected Releases: 5.2(4) 6.1(3)S5 6.1(3)S6 6.2(1.121)S0 7.2(1)D1(1) 7.3(0)ZN(0.161) 7.3(1)N1(0.1). Known Fixed Releases: 7.3(0)D1(1) 6.2(2) 6.1(5) 8.3(0)KMT(0.24) 8.3(0)CV(0.337) 7.3(1)N1(1) 7.3(0)ZN(0.210) 7.3(0)ZN(0.177) 7.3(0)ZD(0.194) 7.3(0)TSH(0.99) 7.3(0)SC(0.14) 7.3(0)RSP(0.7) 7.3(0)N1(1) 7.3(0)N1(0.193) 7.3(0)IZN(0.13) 7.3(0)IB(0.102) 7.3(0)GLF(0.44) 7.3(0)D1(0.178) 7.1(0)D1(0.14) 7.0(3)ITI2(1.6) 7.0(3)ISH1(2.13) 7.0(3)IFD6(0.78) 7.0(3)IFD6(0) 7.0(3)IDE6(0.12) 7.0(3)IDE6(0) 7.0(3)I2(1) 7.0(3)I2(0.315) 7.0(1)ZD(0.3) 7.0(0)ZD(0.84) 6.2(1.149)S0 6.2(0.285) 6.1(5.32)S0 6.1(4.97)S0 6.1(2.30)S0. |
| A "Cisco Firepower Threat Defense 6.0.0 through 6.2.2 and Cisco ASA with FirePOWER Module Denial of Service" vulnerability in the access control policy of Cisco Firepower System Software could allow an authenticated, remote attacker to cause an affected system to stop inspecting and processing packets, resulting in a denial of service (DoS) condition. The vulnerability is due to improper SSL policy handling by the affected software when packets are passed through the sensing interfaces of an affected system. An attacker could exploit this vulnerability by sending crafted packets through a targeted system. This vulnerability affects Cisco Firepower System Software that is configured with the SSL policy feature. Cisco Bug IDs: CSCvc84361. |
| A vulnerability in the Cisco Network Plug and Play application of Cisco IOS 12.4 through 15.6 and Cisco IOS XE 3.3 through 16.4 could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data by using an invalid certificate. The vulnerability is due to insufficient certificate validation by the affected software. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt confidential information on user connections to the affected software. Cisco Bug IDs: CSCvc33171. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| A vulnerability in the web framework of Cisco Unified Communications Manager (CallManager) could allow an authenticated, remote attacker to perform a cross-site scripting (XSS) attack. More Information: CSCvb70033. Known Affected Releases: 11.5(1.11007.2). Known Fixed Releases: 12.0(0.98000.507) 11.0(1.23900.5) 11.0(1.23900.3) 10.5(2.15900.2). |
| A vulnerability in the web functionality of the Cisco Prime LAN Management Solution could allow an authenticated, remote attacker to hijack another user's administrative session, aka a Session Fixation Vulnerability. The vulnerability is due to the reuse of a preauthentication session token as part of the postauthentication session. An attacker could exploit this vulnerability by obtaining the presession token ID. An exploit could allow an attacker to hijack an existing user's session. Known Affected Releases 4.2(5). Cisco Bug IDs: CSCvf58392. |
| A vulnerability in the ability for guest users to join meetings via a hyperlink with Cisco Meeting Server could allow an authenticated, remote attacker to enter a meeting with a hyperlink URL, even though access should be denied. The vulnerability is due to the incorrect implementation of the configuration setting Guest access via hyperlinks, which should allow the administrative user to prevent guest users from using hyperlinks to connect to meetings. An attacker could exploit this vulnerability by using a crafted hyperlink to connect to a meeting. An exploit could allow the attacker to connect directly to the meeting with a hyperlink, even though access should be denied. The attacker would still require a valid hyperlink and encoded secret identifier to be connected. Cisco Bug IDs: CSCve20873. |
